Bronze Member Username: Buddho81Post Number: 42 Registered: May-06 | Anyone know how i can connect 5 different satelittes to one receiver??? I have a dp44 switch...currently i have 110, 119, 121 and 82w connected to it. Is there a way i can combine two of the satellites and plugit into dp44 and tweak the settings on my viewsat ultra??? Please any information will be appreciated! Thanks! |
Bronze Member Username: MwarriorPost Number: 15 Registered: Jun-06 | Theres an aftermarket switch you can find that'll do upto 9 satellites I think (or 8, not sure). That'll work fine. I just have 4 so far, so no need for me to try that yet. |
Silver Member Username: Micklee11801Post Number: 129 Registered: Feb-06 | RKS, Try to order a 22 khz switch with the dp44. On one of the port join 2 sats together and on the receiver setting use 22 khz on and off. Good luck! |
Platinum Member Username: LklivesPost Number: 12405 Registered: Jan-06 | yes u need to order a 22 khz switch and cascade it from the present DPP44 ..and may need the power inverter too.. |
New member Username: TalePost Number: 3 Registered: Sep-07 | How about Motorize Your Antenna ? Guys ,does it really works ? Any good or bad experiance ? |
Bronze Member Username: Buddho81Post Number: 43 Registered: May-06 | 22khz switch...anyone have a picture of 22khz switch with dpp44 switch?? |
Silver Member Username: BantiPost Number: 287 Registered: Jul-06 | here ya go hope dis helps |
New member Username: Tombrown199Post Number: 9 Registered: Sep-07 | Hi you all ! please give me some advice or which thread how to have 4 SATs to 4 receivers, thank in advance |
Gold Member Username: TapemanNew York City in-HD, NY Post Number: 1534 Registered: Oct-06 | SW22 works like an ON/OFF switch 0/22K tone signal that turns OFF LNB or turns it ON But it must be included in antenna setup You can have up to 8 Satellites Many ways to cascade it All based on your requirements |
Gold Member Username: TapemanNew York City in-HD, NY Post Number: 1535 Registered: Oct-06 | The above 2-input/1-output switch is known as SW22 or 22KHz SW I forgot to mark it |
Gold Member Username: TapemanNew York City in-HD, NY Post Number: 1536 Registered: Oct-06 | c/p Yo can cascade SW34 with 4 input DISEqC switch 4 Satellites to 4 receivers The problem with these wirings is too much DC power load on each receiver It is better to buy a unit that has its own power source |
Gold Member Username: TapemanNew York City in-HD, NY Post Number: 1537 Registered: Oct-06 | SW-44 Will work on any modern receiver 2 Satellites to 4 Receivers Each Satellite must have a dual polarity 13/18V Will work without any external power source For more switches Visit King's Corner Click here https://www.ecoustics.com/cgi-bin/bbs/show.pl?tpc=2&post=967635#POST967635 |