im using 090507 pgm on vs ultra. having issues with V pol. i checked the signal strength and quality in channel scan mode. all frequencies give 80% and 70% just 12297 in v pol. shows 80% strength with 0 quality and i m missing few channels in this frequency. experts.. any idea why just 1 frequency out of 34 will come with 0 quality and 80 signal strength , when all other 33 frequencies come with 80% 70% and no channel missing. thanks
vs ultra with standard circular lnb, 18" dish, all views clear on south west no blockage
Did you check to see if the channels got moved to a different TP? Sometimes channels are moved and the TP is shut off. Check lyngsat to see where the channels are.
Thanks for reply guys. no mine is directly connected to receiver. no diseq. lnb power on, 22khz off, 11250 is the freq, no legacy s/w, no diseq.
im newbie. so if the bin embeds the tp info for the channels and provider has changed tp then channel will be missed? also i tried editing the tp to vertical and could see signal going up but quality always 0. have to wait for new bin which would embed the tp info for all channels in 12297 ?
thanks got the channel. weird thing. when i did autoscan or blindscan..it did not pick up but when i did manual channel scan mode it picked.. any reasons ? now when the channel is off air it says autoroll if i switch off autoroll it says no video or audio..so should the channel would automatically show when there is on air without turning autoroll or should i turn autoroll and also rescan again
thanks got the channel. weird thing. when i did autoscan or blindscan..it did not pick up but when i did manual channel scan mode it picked.. any reasons ? now when the channel is off air it says autoroll if i switch off autoroll it says no video or audio..so should the channel would automatically show when there is on air without turning autoroll or should i turn autoroll and also rescan again