Hi Guys, I need help. I am using Pansat 3500. Had all the channels on 61.5 working till yesterday when all of sudden some channels were lost. I tried blind scan but so far had no success. All the wires and the diseq is fine since I am getting rest of the channels fine. I even tried scanning the network for the particular satellite and also the TP scan, but nothing. Any suggestions from anyone is appreciated.
kchang, I am going through same problem I had a FLU changed to pansat 2500 to 2700 upgrade all great worked well. So I think Im great, Ha Ha and say I can do my brother in law fortec (of course gave him mine for time being)I did the 205 and 208 upgrade same as I did mine. Then tried to download channel list saved about 10 times no luck . So I did scan for echo 7 and echo 9. Indiana Kentucky my area, It worked for 2=3 min. then I kept getting b75 flash night rider lights. I then re did factory bin for pansat 310? 115? not sure now which one Im sure it was the right one. Signal shows fine. and scan shows all channels When going there it then shows bar up, then shows No Signal. Which happens never. I checked my antenna and satellite settings, the same as always. I now only get no signal. Checked all lines.??10times
Anyone have any suggestions on what I may have missed. Thank-you Respectfully, Kim
BL's BINs have a little bit of overlap at times in the temp memory area, and if you have a lot of total channels this can happen particulalry with Pansat 2500s. Try erasing channels you do not use, keeping the overall number to under 500.
Kim again, I didn't say, When all failed I went to pansat factory bin??# 205 then 208 then channel list. for pansat instructions. When that didn't work I just tried to rescan echo 7 and echo 8 sats, Showed channels picked up ok.
Then when I go to channels my Flu-pansat shows no signal. which never happens.
AV I read your post on your change I did the same what did I do wrong on this second FLU? 5 times re=tried if not more. Respectfully, Kim
Thanks Nalin, I keep up on all your post when needed ha. Going there now to try your suggestion. Your one of the best I do know. Thanks a Bunch, Will post back. Thank=you again. Respectfully, Kimberly