NIMIQ 2 - BEV

 

Bronze Member
Username: Wariat

Post Number: 44
Registered: Nov-06
I just loaded the new BEV program to my viewsat and it worked but the Nimiq 2 satelite channels dont work, while Nimiq 1 does work.

anyone know what to do?
 

Silver Member
Username: Spank

Post Number: 327
Registered: Oct-05
Get an HD receiver
 

Bronze Member
Username: Wariat

Post Number: 45
Registered: Nov-06
that does not answer the question because it was working before I changed to the new FIX today
 

Silver Member
Username: Spank

Post Number: 331
Registered: Oct-05
No, that probably doesn't answer your question but if you had an HD receiver you would love NIMIQ 2
 

Silver Member
Username: Hardrockstriker

Post Number: 987
Registered: Apr-06
Is your dish aimed correctly? Are your receiver antenna settings proper (82 deg lnb mapped to correct switch port mapped to Nimiq2)?
 

Gold Member
Username: Tapeman

New York City in-HD, NY

Post Number: 1373
Registered: Oct-06
Yep
Jason is right
Aiming and correct setup will get yo what is missing
However if U R using DISEqC switch can be shorted from rain etc.

These are few basic tips:

- Steady dish point and alignment
- Good shielded cables(RG-6) and sealed connectors
- Must match LNB type to receiver santenna settings

Upload
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us