No Channel plz help

 

Bronze Member
Username: Hus

Post Number: 99
Registered: Sep-06
Hey guys I turned off my viewsat extreme from the switch, but when I turned it back on there was a No Channel display on the front of the reciever. I checked my signals and they were all fine but I was getting No channel,therefore no picture. I loaded the latest bin again and tried to scan all my sats, but still nothing, it's showing that I have no signals for nimq or echostr, any ideas?
 

Silver Member
Username: Hardrockstriker

Post Number: 981
Registered: Apr-06
Start troubleshooting. Try a different receiver (borrow from a friend). If that works then problem is with your recevier. If not, then suspect your switch or lnb. I'm assuming your dish hasn't moved out of alignment.
 

Silver Member
Username: Hus

Post Number: 101
Registered: Sep-06
yeah..no I was watching tv untill I switched it off, extreme bins have a prob with the favorites menu sometimes Im unable to get in so I have to switch off and on
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us