Hi Every one. I just get this one from my friend and put it up on the roof but doesn't matter how i turn it (up/down) i still can't get any signal at all. Please anyone can help. I live in thousand oaks , california and set my disk to south east (texas) and try to get 110. Thanks for any help again
I have a 2500A Pansat. I can't get the new bin number to download. It never starts. I need to know, since it must not hve enough space how to remove old infor or bins. I do not see this problem being discussed. I have not received a response either. Please Please Help
use the jtaglees fix for the 2500 when using correct cable and bin loading does not work... Instruction fixing your Pansat2300A and 2500A. DSS*CENTRAL.NET instructions below
1) Open Blacklist Stb Updater 1.3a 2) Browse for bin u are trying to load 3) Connect from PC to REC with DB9 straight cable. 4) Keep your receiver off. DO NOT TURN THE RECEIVER ON FROM THE BACK SWITCH 5) Press Send button on BLACKLIST STB UPDATER 1.3a 5) Then turn your receiver on from the back swich with in 5 secound. 6) Wait untill download completed. DON NOT TOUCH ANYTHING UNTILL YOU SEE MESSAGE (Completed) 7) DO NOT LET THE RECEIVER TO RESTART BY IT SELF. 8) After you see message completed, Swich off back button on the back of the receiver right away. 9) Wait for 10 Secound and turn your receiver on again. 10) Enjoy Your Tv Back.
Thanks to Psychmonster, RTAP, Kavin Reno and Dantetn, for the quick response, I will let you know how well the advise worked. I am truly glad to know I am not trying to fix this on my own without the knowledge of experts. Thanks
abo...go to the official BL site and register and look under Pansat 2500 file uploads or Jtag section...you will find everything you need http://*www.future-fta.info (take * out and copy and paste address)
