I got a question

 

New member
Username: Batjc

Post Number: 7
Registered: Aug-07
i have a 2700 pansat

and i already install the latest bin

and i turn on the pansat and the st 110 is functioning perfect

but 119 said no signal

any suggestion?!
 

Gold Member
Username: Satscanner

Beaversbush, Sportsmans P... Great White ...

Post Number: 2618
Registered: Nov-06
Reset your antanae settings and scan ,but you have a lnb set up for 119 , right?
 

Silver Member
Username: Cartier1

Post Number: 555
Registered: Feb-07
after the hit . some aliens came from no where they ask idiot question . whyyyyyyyyyyyyy? they dont readdddddddddd. so satscanner u may loose it if u fallow these extra terrester aliens . :-)
im back satscanner to my old way but this time only with newbies :-)
 

Gold Member
Username: Satscanner

Beaversbush, Sportsmans P... Great White ...

Post Number: 2620
Registered: Nov-06
Yeah we can see that.
 

Silver Member
Username: Donnie1973

Post Number: 662
Registered: May-06
the new bin reset the reciever to factory. U do have have to set up antenna again. lnb type, disecq 110=2 119=1. scan
 

Bronze Member
Username: Rcfiddlerman

Post Number: 37
Registered: Sep-06
make sure u change your transponders as well and when u do that look at the bottom right of your tv screen as you are scrolling through your transponders it shows u what ones are getting a signal. and if your transponder aint getting any try and blind scan the ones u are chances are u probally are pointed at the wrong sattelite and u think u are pointed at the right one...just saying maybe but try this and it might work for u also if all else fails load the factory bin file,then do a factory reset,then load the newest bin, turn autoroll on,then default setting,and hopefully this works for u sounds like lots of work but i guess thats the price u pay for free tv hope this helps peace out!
 

New member
Username: Batjc

Post Number: 8
Registered: Aug-07
i did all that...

i put the receiver in another house and worked perfectly

but when i went to my house again the same problem...
 

Platinum Member
Username: Lklives

Post Number: 10817
Registered: Jan-06
Jean...

Obviously U have a house hardware issue...

dish alignment is bad...MOST LIKELY reason
bad cables/connection
bad LNB or LNB port
bad switch

or possibly U have the incorrect antenna settings for your house satellite dish and hardware
 

New member
Username: Batjc

Post Number: 9
Registered: Aug-07
thx lk i'll check that

!thx
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us