i getting crazy please help . i connected 2 new viewsat lite with the latest bin . i have 110===lnb is d/p /119:===lnb is standard and 61.5========lnb is standard
connected to both receivers. if i turn on one .the other loose signal. i dont understand why??????????
i m sure i read about it in the past here but never find it now . first time i experience this .
ps: i receiver is connected the all the left side of the lnb . the other is connected to all the right side of the lnb.
Beaversbush , Sportsmans Paradise Great White North Post Number: 2577 Registered: Nov-06 Posted on Monday, August 06, 2007 - 01:04 am:
-------------------------------------------------------------------------------- Find a specific archived thread ? from here? with this search engine ? Thats a good one !
But I think the one you're reffering to was explained by "King" as a voltage conflict problem. Recheck your ant, settings and coax connections,[check to see there tight and no hair wire shorting inside the connector].But experience with this problem has mostly lead me to diseq switch leaking voltage across ports or to grnd. Try reconfigering the settings and using different un-used ports of the switch or replace the switches. This has happened to me many times and somtimes will re-appear after a while. Once it was the lnb leaking voltage across to the other port on a dp duall lnb.
SatScanner Gold Member Username: Satscanner
Beaversbush , Sportsmans Paradise Great White North
Post Number: 2578 Registered: Nov-06 Posted on Monday, August 06, 2007 - 01:27 am:
-------------------------------------------------------------------------------- A quick fix that works sometimes is on [receiver 1] set sat 1 with port 1 sat2 with port 2
but here's the trick. receiver2 set sat 1 port3 sat2 port 4 on the different switch.
For 2sats on two receivers I would recommend using 22kz tone switches ,better faster more reliable switching ,a few bucks more but worth it.