Khwaja: Read my post about the latest the keys above in detail and you will know what provider ID means. Read my note to Sidhu about the latest BIN. You can find it in system info.
If you guyz are using atmega cards or jeepers your tiers have expired (channels in the guide show up red)...d/l the new jeepers 4.2 program and you should be golden...keys are the same as of the last release date (07/12/07)
How do I get the English channels & Indian Channels on my Pansat 3500SD receiver without changing the bin numbers The only way to English channels is the change the bin numbers & when I do get the Indian channels I get only zee tv, B4U & Zee cinema So How do I get these channels on the same receiver without changeing the bin & How do I get all of the Indin Channels as well.
Paresh: You are too confused to elicit a proper answer. To get American channels and Indian channels, most people have two dishes. Indian channels are on Echo 3 (61.5W) for the East Coast, or 148W for the West Coast. The regular programming is on Echo 7 (119W) and Echo 8.1 (110W) usually. Give more information on your dishes, LNBs, swithces, the connections, the BIN that is installed on Pansat 3500 etc and somebody might be able to help.
Che G. : I think you should get nearly 100% channels on Pansat 2500 clones with 293T BIN. If you are missing some, do a blind scan, and if still missing some, do a specific TP scan for the missing.
Thank you Nalin for answering; I did a blind scan for sat 110, I got all the foreign channels including the channel telling me welcome and congratulations you are pointing at 61.5; and I did the same for sat 119, and strangely, I got the same channels, and the channel congratulating me for pointing at 61.5. So where is the problem? I have a disecq with 4 entries, and I am using number 2 & 3. Is the disecq broken? So how come I am still getting one sat? Or is my other dish not pointing at the right direction? Mystere et boule de gomme as the french say.
Che G. : Presuming you have two sats and appropriate LNB in one for both 119W and 110W and in the other for 61.5W, then you should go into Menu/Antenna and do the following software connections. 119W - port 1 on DisEqC 110W - port 2 on DisEqC 61.5W - port 4 on DisEqC. Then do blind scans. Afterwards scanning each, if you up/down through the channels, you will see at the bottom left the actual satellite scanned. It really does not matter what sat you appear to be scanning. You will always scan the one you are pointing to. The Dish which has 119 and 110 can have different types of LNBs to cause difficulties in scanning each separately. A damaged DisEqC will always scan Port 1 only. NEVER connect/disconnect a cable to the switch with receiver power on. This is the most common cause of DisEqC switch burnout.
nalin i need ur help!!! my indian dish is only finding 4 indian n rest eng ch. ive done almost everything which i could through this website. can u guide me plzzz? cuz ma mom is eating my brains to fix this price of ******. ill be grateful to u.thx
my keys keeps on changing by itself but when i put the new keys, couple hours after it changes to the old keys. it happen 5-6 times already. all i have to do is put the new keys from last update but it keeps on changing back to the old ones. any1 knows how to fix that problem?
Hello anyone willing to help. I have a colsat reciever and it is all screwed up. Can anyone tell me what to do to enter new keys and hopefully find all my channels. please
amrit : Pantec is a Pansat 2500 clone. You need BIN 293T. http://www.dssrookie.com http://www.dsstester*com http://www.dssevolition.com
You will find it in the Pantec and in the Fortec ultra section. Make sure it is a 293T and not just a 293 BIN. Use straight DB9 cable and BL updater 1.4 for the upload. All files should be unzipped before use.
Patticake : File uploading is sometimes tricky. Go to some of these sites and learn all the details of uploading a BIN. [link removed] http://www.dssrookie.com http://www.dssevolution.com
Jeff Pattison: As "u" suggested, install the latest BIN and the keys will autoroll. You will find a wealth of information at the sites I have mentioned above.
Hi Nalin Nyda..i need some help abt fixing of dish..is there any site from where i could get all information step by step that how to fix a dish from the begning..i mean fixing of dish plate outside connecting a new reciever with the dish and tv..and all after steps to get the signals..i mean what kind of settings required in the reciever to get the signals and channels..in other words when a dish fixing expert go for fixing a fresh installation of satellite anywhere..what procedure they adopt..however i know the procedure to download bin files and keywords..only want to know the initial procedure..and if there is a seperate procedure for all recievers..then let me know how to fix coolsat5000 platinum..i think u hve understood what i am asking..thnkx
i have a problem with my pansat 2700A. since 3 weeks, my pansat didnt work. I have good quality and good signal, but no IMAGE. I put the new keys. DN and Bev Keys Feed Nagra2 keys ---------------------------------------- Dish Provider 0101: Last Updated (12 july '07 1:30 pm EST)
Key 0: C5 42 C5 AE 9B 04 1D AA AA DC FC 40 99 82 3B D1
Key 1: 5B 27 8C AF DO 1E A5 A6 D7 74 3B A6 B4 21 17 97 (active)
Bev Provider 0901: Last Updated (10 july '07 7:00 PM EST)
Can someone help me, my tv is black and white and I can not remember what I did last time to fix it. Any suggestions wpuld be great. Thanks in advance, Tammy
Hey, Shut off your auto roll and plug in the 01 keys (Active) 5B 27 8C AF D0 1E A5 A6 D7 74 3B A6 B4 21 17 97
This worked for me, however my 00 keys had rolled to something else so I put the old (July 12) keys in. Good luck, this should get you back up and running
Hi - hoping someone can help. For some reason, I can only plug in the 00 keys - can't get to the 01 keys, it doesn't give me the option to look at them. Does anyone know what this means? Thanks in advance.
I have no idea what your talking about. All i was trying to do was help and give the BEV keys that I found that are currently working. I made the mistake of posting the wrong keys the first time as I was reading the wrong set, but the keys that I posted in the second post were the ones that are working right now.
thank u very much