Bronze Member Username: Chris7777Post Number: 32 Registered: May-06 | is bev down or is it just keys how about charlie ???? somebody please respond |
Bronze Member Username: Tekomi_elhoyoPost Number: 31 Registered: Jun-06 | Charlie down too. Looks like something big |
Silver Member Username: Destine0429Quebec Canada Post Number: 192 Registered: Dec-06 | Apparently everyone on here is sleeping or ran away from home. I had the keys working earlier with keys I found on www.tvkeyz*com But now they are not working. I've since then put in about 5 more sets of keys found all over the place. Still waiting for new keys on here. But seems everyone that is smart aka LK, SatScanner and a few others are not around. Hope they get here soon, since my kids are driving me nuts with no Cartoon channels} |
Bronze Member Username: AdaleCanada Post Number: 19 Registered: May-06 | BEV- Key 0: 5B 27 8C AF D0 1E A5 A6 D7 74 3B A6 B4 21 17 97 (active) Key 1: C5 42 C5 AE 9B 04 1D AA AA DC FC 40 99 82 3B D1 |
Bronze Member Username: AdaleCanada Post Number: 22 Registered: May-06 | Sorry...wrong set!! Bev- Key 0: D3 0A 98 93 87 C8 EC FA 56 64 5E ED 6E C1 FF 0A(active) Key 1: CO 89 A1 34 84 22 32 CD 36 11 33 7F AB 4E 02 08 |
Bronze Member Username: Chris7777Post Number: 33 Registered: May-06 | key is no good ??? |
Bronze Member Username: Chris7777Post Number: 34 Registered: May-06 | ok ill try it out |
Bronze Member Username: AdaleCanada Post Number: 24 Registered: May-06 | Did it work for you? |
Bronze Member Username: Tekomi_elhoyoPost Number: 32 Registered: Jun-06 | Charlie working by turning off autoroll and manually entering the following: Key 0: 5B 27 8C AF D0 1E A5 A6 D7 74 3B A6 B4 21 17 97 (active) Key 1: C5 42 C5 AE 9B 04 1D AA AA DC FC 40 99 82 3B D1 |
Bronze Member Username: Tekomi_elhoyoPost Number: 33 Registered: Jun-06 | New keys for dish are the following NOT the ones before. Make sure autoroll is OFF ---------------------------------------- Dish Provider 0101: Last Updated (31 july '07 1:30 pm EST) Key 0: BB 59 DF CF 32 DD 87 6C 3B D1 37 03 07 60 30 6A Key 1: 5B 27 8C AF DO 1E A5 A6 D7 74 3B A6 B4 21 17 97 |
Silver Member Username: Destine0429Quebec Canada Post Number: 193 Registered: Dec-06 | w00t! Thanks Dayle, I finally got my house nice and quiet...for now |
New member Username: IndopakPost Number: 6 Registered: May-06 | i entered that key and it was working but now its down again |
Bronze Member Username: AdaleCanada Post Number: 25 Registered: May-06 | LOL Your welcome! I have the same feeling of peace around here!! |
Bronze Member Username: Tekomi_elhoyoPost Number: 34 Registered: Jun-06 | Bargain stop, turn autoroll OFF for BEV or whoever you are receiving from. |
Bronze Member Username: BiverlandPost Number: 90 Registered: May-06 | Turn autorolls to "OFF" on Bev & Charli No more autorolls at this time .. |
Silver Member Username: Albino_midgetPost Number: 551 Registered: Jul-06 | also, the above 00-should start with B8 https://www.ecoustics.com/cgi-bin/bbs/show.pl?tpc=2&post=1212643#POST1212643 |
Bronze Member Username: DmdilPost Number: 34 Registered: Mar-06 | samething happened 2 me.. i put the key in. it came for about 10 secs and then it went back to w.e it waz looking like. |
New member Username: IndopakPost Number: 8 Registered: May-06 | Tekomi Elhoyo i have a fortec classic na with dn, i dont see no option to turn off auto roll, how do i do it can u help me |
Silver Member Username: CanndyPost Number: 397 Registered: Nov-06 | NEW KEYS [link removed] |
New member Username: Memo7339Post Number: 6 Registered: Feb-07 | do u guyes think there is bin files on the way???/ plzz help |
Platinum Member Username: LklivesPost Number: 10614 Registered: Jan-06 | SHUT OFF AUTOROLL AFTER U INPUT THESE KEYS...DN IS MORPHING KEY 00 FROM B8 TO BB...ITS NO BIG DEAL... Keymaster 4.0 ---------------------------------------- DN and Bev Keys Feed Nagra 2 keys ---------------------------------------- Dish Provider 0101: Last Updated (31 july '07 5:30 pm EST) Key 0: B8 59 DF CF 32 DD 87 6C 3B D1 37 03 07 60 30 6A (active) Key 1 5B 27 8C AF DO 1E A5 A6 D7 74 3B A6 B4 21 17 97 Bev Provider 0901: Last Updated (31 july '07 6:15 PM EST) Key 0: D3 0A 98 93 87 C8 EC FA 56 64 5E ED 6E C1 FF 0A (active) Key 1: C0 89 A1 34 84 22 32 CD 36 11 33 7F AB 4E 02 08 |
New member Username: Patty777Post Number: 9 Registered: Jul-07 | how to do that let me know LK.. where do we find autoroll options |
New member Username: BillcasbillPost Number: 1 Registered: Jul-07 | IS EVERYBODY HAVING TROUBLE WITH THE KEYS NOT LOCKING IN MINE ARE THE FIRST TWO ONLINE 1 AND LINE 3WHICH IS B8 AND5B} |
Bronze Member Username: Patty777Post Number: 13 Registered: Jul-07 | same problem for me |
New member Username: NutcasePost Number: 1 Registered: Jul-07 | not working for me either. pansat 3500sd keycodes and all autorolls to off. |
New member Username: BillcasbillPost Number: 2 Registered: Jul-07 | IF EVERYBODY IS HAVING THE SAME PROBLEM HOW CAN WE FIX IT.I HAVE TURNED AUTOROLL OFF AND ONE MINUTE LATER SCAMBLE TV |
New member Username: Lh25045Clendenin, Wv Usa Post Number: 1 Registered: Apr-07 | finally got mine up again but had to reverse the keys and change them both to "00" instead of the 1st one being 00 and the 2nd one being 01. |
New member Username: Boosted7Post Number: 1 Registered: Jul-07 | Keys worked great on my bev with a 5000, turned off the autoscroll and updated the keys, no problems. |
Bronze Member Username: DerrymaltonPost Number: 25 Registered: May-06 | Hi , Could any one tell me how I can enter keys manually for captive work 600p. its down pls. thanks |
Platinum Member Username: LklivesPost Number: 10637 Registered: Jan-06 | derry...shut off autorolls and input keys... Here is a How Tos guide for all of the features available in CW600s Premium. =========================== 1.How to change EPG style? (Available in V1.13 Premium) =========================== Now EPG style can be changed to new or old style. New epg style looks great but if you are using full channel name Old epg style will work good for you because it got more room to show full channel names. Here is how you can change EPG style. Main Menu ->System settings-> OSD -> EPG Style -> Old or New ======================================= 2.How to Turn ON/OFF Display Icon feature? (Available in V1.13 Premium) ======================================= Premium model allows you to see Icon in EPG and also on right upper corner of the screen. To make this feature work you have to load the Icon.bin file to your receiver. After you have loaded the Icon.bin file must turn this feature ON/OFF to see Icons in EPG and on screen. Main Menu ->System settings-> OSD -> Display Icon -> Yes / NO ========================== 3.How to set 10/24 channels display? ========================== Main Menu -> System Setting -> OSD -> Scroll down to Channel List change that option to 10 or 24. Now whenever you will press Ok button on your remote it will show 10 channels or 24 channels. If you press F1 key system will sort all of the channels ===================== 4.How to set Event Timer on fly? ===================== With new OSD you can set event timer to certain event that will start in future sometimes on fly. Before set an event timer just make sure EPG is fully loaded. EPG -> Scroll to the event that you want to tune automatically and press "Green" key from your remote. A window will open to confirm date and time that event will start; Now just Press Ok to set. ======================= 5.How to Factory Default a CW600? ======================= New OSD the location for this feature is changed but it works exactly the same as in old OSD. Main Menu -> Installation -> Factory Default =============== 6.How to set time? =============== Main Menu -> Channels Manager -> Timer -> Time setup =========================== 7.How to Enable Patch or Disable Patch? =========================== Exit all menus, Press F1 key; the LED will display 'H', then press '000' =================== 8.How to Edit Patch key? =================== After Enable patch key, go to Main Menu-->Accessories--> Key Menu ======================== 9.How to configure the SID sort? ======================== From main menu->system setting->system->channel No. style can change: Normal: Normal sort order SID sort: Dish order ===================== 10.How to Category Search? ===================== 1) Make sure the epg is loaded- to do that just open the epg screen and see if the boxes are full, if not go choose any box that has no epg and wait 15-20 sec and it will be filled. (You only need to do this once in the beginning). 2) Then exit and hit F2 on your remote. 3) Category box will open, just choose what category you want to watch and hit ok 4) After 2-3 seconds, a list of channels will open which are CURRENTLY playing these categories (every half hour this list changes when a new show is finished or started) 5) Next to the channel there is the title of the show, if you hit INFO button it will open the full information, hit INFO again and it will disappear. Just select what you like and watch. ================ 11.How to Blind scan? ================ BLIND SCAN function can be accessed by going to Main Menu-> Installation -> Antenna Setting -> selecting the satellite that you want blind scan and press Yellow key on your remote. ========================= 12.How to Clone CW600s Box to Box? ========================= From DigitalPlus: 1) Connect the master and slave box with twist RS232 null modem cable (pin2 to pin3, pin3 to pin2, pin5 to pin5). 2) Start the master receiver and press "POWER" key to make it standby "- - : - -". 3) Start the slave receiver, in the master box the led will display 'H' and blink it. 4) Input the password: 111 ---- Transfer S/W 222 ---- Transfer data 333 ---- Transfer data, then S/W 444 ---- Copy whole flash except Boot Loader. 5) After finishing inputting the password. Transfer will begin. When it finish, the LED will Display "-End". Disconnect the cable, start your receiver. Note: By the different password, you can do what ever you want to do for Box to Box. ===================== 13.How to set DishPro LNBs? ==================== DishPro LNB settings can be accessed by going to Main Menu-> Installation-> Antenna Setting-> LNB type-> OCS-DP =============================== 14.How to Set Legacy SW21/42/44/ Switch? =============================== Legacy Switches settings can be accessed by going to Main Manu-> Installation-> Antenna Settings-> Legacy SW Set the type of switch you got on your dish setup. Don't forget to set DISCQ setting to none otherwise it will not work properly. =============================== 15.How to set channel lock on certain channels? =============================== Channels can be locked by going to Main Manu->Channels Manager->TV Channels -> Right Arrow-> Lock/unlock go to specific channel and press OK key on your remote. ============================= 16.How to video adjustments option menu? ============================= Video options can be accessed by pressing zero "0" when view your normal TV. Brightness, Contrast, Saturation, Hue, Sharpness and Tint can be adjusted ================== 17.How to Auto TP? ================== Auto Transponder Update can be Turn ON and Turn OFF by going to: Main Menu ->System settings-> system-> Auto TP changed to ON or OFF. =============================== 18.How to get Twelve hour EPG on a CW600s? =============================== To get 12 hours EPG tune to any channel on listed Transponders. EPG will show 12 hour programming. Some TPs below help you get 12 hour EPG: Dishnetwork: TP: 12530 For Example CHs : 457 or 517 XXXX: TP:12268 For Example CHs : 212 or 615 ===================================== 19.How to change Time setting from Military to Regular? ================================== === To change time from Military to Regular go to Main Menu -> System Setting -> OSD -> Time Display Format change to 12/24. ======================================= 20.How to search Favorite show channel number and time? ======================================= Shows can be searched with start time and channel number by pressing the Click on Find key on your remote -> select OK -> then type your show name and search. =============================== 21.How to Turn ON/OFF Auto Roll feature? =============================== Autoroll feature can be turn OFF and ON by going to: Main Menu -> System Setting -> OSD -> Autoroll -> ON/OFF ============================== 22.How to Turn ON/OFF key update message? ============================== Key update message can be turn OFF or ON. This feature can be accessed by going to: Main Menu -> System Setting -> System -> Key Update Message -> ON/OFF ======================================= 23.How to turn ON/OFF DN/XXX full name display? ======================================= This unique feature can be accessed by going to: Main Menu -> System Setting -> System -> Scroll down to the next page -> ON/OFF _________________ |
Bronze Member Username: KhopdiPost Number: 27 Registered: Apr-07 | Hey LK - I am bit confused. Please clarify. Post #10614 you wrote - "SHUT OFF AUTOROLL AFTER U INPUT THESE KEYS...DN IS MORPHING KEY 00 FROM B8 TO BB...ITS NO BIG DEAL..." Post #10637 you wrote - "derry...shut off autorolls and input keys..." |
Bronze Member Username: DmdilPost Number: 36 Registered: Mar-06 | hey, Lk what's up man. long time no talk. anything new beside coffee and cookies? |
Gold Member Username: NydasPost Number: 3076 Registered: Jun-06 | DN is morphing Key 00 - first number. The best thing you can do is 1. Turn off autoroll 2. Turn off auto Tp 3. Do set default keys. 4. enter keys and same. 5. Turn of receiver and turn it on after a few seconds. |
Silver Member Username: TechmeMIAMI, FL USA Post Number: 105 Registered: May-07 | autorolls except the first 2 letters on 00 and 01 all you have to change is first 2 letters on 00 and 01 |
New member Username: NutcasePost Number: 2 Registered: Jul-07 | nothing works for me. im puzzled. |
Silver Member Username: CanndyPost Number: 406 Registered: Nov-06 | NEW KEYS [link removed] |
New member Username: NutcasePost Number: 3 Registered: Jul-07 | been there. done that. |
New member Username: WayzerPost Number: 1 Registered: Jul-07 | I am new, has the 00 09 01 '86' has the '86' changed to 00 and 01 for '96'.... I am getting a bit confussed. I am a newbie (first day) |
Platinum Member Username: LklivesPost Number: 10646 Registered: Jan-06 | 00 = 86...they r the same keys 01 = 96...they r the same keys |
New member Username: WayzerPost Number: 3 Registered: Jul-07 | ok, so I have 86 and 96 keys as mentioned on here. And I have nothing. |
Bronze Member Username: DrummerboyPost Number: 19 Registered: Apr-06 | got my viewsats running. A little tricky to find WHERE to put the keys, cause DN has 2 input screens, one with 4 rows and one with 5... i just used a little brain power to find the morphing spots, and only have to change a couple characters... thanks LK. |
Gold Member Username: SatscannerBeaversbush, Sportsmans P... Great White ... Post Number: 2496 Registered: Nov-06 | derry m Bronze Member Username: Derrymalton Post Number: 25 Registered: May-06 Posted on Tuesday, July 31, 2007 - 08:43 pm: -------------------------------------------------------------------------------- Hi , Could any one tell me how I can enter keys manually for captive work 600p. its down pls. thanks Here you go ,LK's post #10637 didn't include this. CW600s Manual Key Entry How To for Key Entry and Turning AR off Have not seen a sticky on this for the CW600s and had a bunch of people ask how its done. Here ya go. CaptiveWorks CW600s Manual Key Entry for when Autoroll is not working. Step 1: Turn Off AUTOROLL Go to Menu. Go To System Setting. Go To OSD. Go down to Auto Roll option and turn it to OFF. Step 2: Manual Key Entry Go to Menu. Go To Accessories. Go down to Key Menu. Press Left Arrow Once to show "NAGRA2" on top of screen. B*V: Go down to 00 09 01 section 80 is Key 00. Press Green Button. Enter new Key 00 there. Go down to 00 09 01 section 90 is Key 01. Press Green Button. Enter new Key 01 there. D*shNetw*rk: Go down to 00 01 01 section 80 is Key 00. Press Green Button. Enter Key 00 there. Go down to 00 01 01 section 90 is Key 01. Press Green Button. Enter Key 01 there. Enjoy! |
New member Username: NutcasePost Number: 4 Registered: Jul-07 | ok i have a pansat 3500SD. i have entered the code as i see them. autoroll off, auto tp off, keycodes off. still nothing. what am i doing wrong? |
Bronze Member Username: GastrognomePost Number: 43 Registered: Dec-06 | keycode must always be ON |
New member Username: NutcasePost Number: 5 Registered: Jul-07 | cool works now. hehe. thanks a million. |
New member Username: Gusmedina73La Habra, California United States Post Number: 2 Registered: Aug-07 | My VS2000 got worst. I switch the codes that Mr.LK provided and nothing. Second I went to reset the box to default settings, got worst. My channel list don't even show now, I don't even know what the LNB Frequency & TP Frequency should be at, also should I have my 22Khz Power on ? Can somebody help me. The codes for dish on one screen has 4 rows and the second has 5 rows ? ? ? |
New member Username: DobbsyOntario Post Number: 1 Registered: Aug-07 | Looks like keys have changed several times since this afternoon. DN and BEV having fun with us...might as well not panic...it will settle down soon...I hope. |
Gold Member Username: NydasPost Number: 3081 Registered: Jun-06 | Keys are changing frequently. There is no need to panic. Even after manual key entry, you may get key morphing occurring and you may have to reenter. New keys are posted constantly in the "New Keys" thread of this forum: https://www.ecoustics.com/electronics/forum/home-video/259083.html |