I need help, if this issue was reported before, please provide me link and I will read thru that thread for resolution.
I have Pansat 2700A. It was working fine until about 3 weeks ago. It stopped working. The Level in Installation shows 99%, the "Quality" is blank. I check the dish and cable all okay. I connected DN receiver and I check the signal strength, I was getting about 90 to 110.
I loaded the boot 75 on it and then loaded bin file 203.
i have a problem with my pansat 2700A. since 3 weeks, my pansat didnt work. I have good quality and good signal, but no IMAGE. I put the new keys. DN and Bev Keys Feed Nagra2 keys ---------------------------------------- Dish Provider 0101: Last Updated (12 july '07 1:30 pm EST)
Key 0: C5 42 C5 AE 9B 04 1D AA AA DC FC 40 99 82 3B D1
Key 1: 5B 27 8C AF DO 1E A5 A6 D7 74 3B A6 B4 21 17 97 (active)
Bev Provider 0901: Last Updated (10 july '07 7:00 PM EST)
no 203 bin should be working fine right now other than the "last" key problem. Did you try and swith your receiver ON/OFF from the back? do that and if the problem still exist then do a blind scan
try checking caps in the receiver on power supply board c13 and c14 if puffed up on top there bad make sure you replace the same way they came out neg and positive
First of all...you need to check if the Diseqc switch is working or not, try to plug directly the cable coming from one of your LNB's to the receiver and then select Diseqc to OFF at the settings, if you can get video then your Diseqc is bad, Diseqc are very sensitive components and normally fails when humidity or some other conditions happen....
i have a pansat 2700a receiver and i have a problem with it keeping the channels. i have to rescan them then it is ok until i do some channel seaches. I also can't seem to be able to turn the tp autoupdate "on"
Jelly bean, I noticed it last night on my receiver too that i have to keep rescanning, the channels doesn't stay. Also same issue with not being able to turn the TP on.
I wonder if it's due to bin file 204. Is that what you have?
i have a 2700A receiver and i just lost the image the quality is 88%, but the it keeps seaching for the signal. does anyone have the new numbers yet. im not the only one who lost their pictures.
i am new at this. i have a pansat 2700a and i don't know how to put the new keys in. i see there are new keys that came out july 31 and i don't know the proceedure to put the new ones in