Archive through June 20, 2007
|
New member Username: LexiPost Number: 3 Registered: Jun-07 | New Keys anyone?? please. |
|
Bronze Member Username: TherepoFtaview.com Post Number: 50 Registered: May-07 | Rat, one of these times you're out there adjusting the dish, take a socket wrench with you and tighten it up real good. For keys, check in your system info you have the latest software installed: x-85bl_070411_293_api. Then make sure the autoroll option is turned ON. |
|
Bronze Member Username: Katekev04Post Number: 21 Registered: Jun-06 | Those keys are not working for me either! |
|
Bronze Member Username: Katekev04Post Number: 22 Registered: Jun-06 | Never mind, needed to roll I guess |
|
Bronze Member Username: Vazman4uPost Number: 15 Registered: Jun-06 | Help! Since keys changed, no TV! Pansat 2700A X-87bl | API:75-2.03_EUBX Boot Ver: 75 070411 bin I have high level, but 0 quality. Did they move the SATs? I went to my roof and played with the position of the dish, but still no quality. I get "no signal" even on channels that are not scrambled. Can u please tell me if I should spend some more time on my roof or is it a software issue? Nalin, anything??? |
|
New member Username: RatPost Number: 2 Registered: Jun-07 | therpo, He hooked it to a pole and inserted into the groud. I have to get a new pole, because that is what is causing it to move. My system information reads x-85bl API :2.82Ta_EU Boot ver: 6.0 21. Oct. 2006 Future - FTA Make sense? |
|
Silver Member Username: BertoroToronto, Ontario Canada Post Number: 574 Registered: Apr-05 | guys..try these...again they are working for me Key 0: 3A 50 1C 03 02 07 30 A6 75 5A 13 22 32 E3 6E A5 |
|
Bronze Member Username: Vazman4uPost Number: 16 Registered: Jun-06 | I have the correct keys installed and I tried autoroll on and off. Can anyone please help? |
|
New member Username: RatPost Number: 3 Registered: Jun-07 | I also have the correct keys but no picture. Autoroll is on as well. |
|
New member Username: RatPost Number: 4 Registered: Jun-07 | Should codes for Provider ID 01 and 09 be exact? I put the above codes in for Provider ID 01 01, Key number 01 and 00. What about Provider ID 09? Please help |
|
Bronze Member Username: Vazman4uPost Number: 17 Registered: Jun-06 | RAT: Provider ID 09 is for the BEV keys try these: Bev Provider 0901: Last Updated (6 June '07 2:45 PM EST) Key 0: E3 56 7B 2F 6C C1 51 FF D9 42 4D 8A D3 3E 44 C5 (Active) Key 1: F1 69 FA E9 5F 6E 33 94 5E 28 F3 C4 99 5A 00 F5 |
|
New member Username: RatPost Number: 5 Registered: Jun-07 | Thanks Joe. It keeps jumping to TP AutoUPdate. Not sure why... |
|
New member Username: RatPost Number: 6 Registered: Jun-07 | I'm up and running. I turned the TP autoupdate off and now I'm up. |
|
New member Username: Bobby5612Warsaw, In United States Post Number: 1 Registered: Jun-07 | i have a fortec ulta i tryed to put the key in but when i hit the ok button my receiver go off. what sould i do |
|
Bronze Member Username: TherepoFtaview.com Post Number: 51 Registered: May-07 | Rat: The bin you have is from last October. No wonder it's not autorolling!!! |
|
Gold Member Username: NydasPost Number: 2838 Registered: Jun-06 | Rat: Based on the information about your current BIN, I would suggest you install 293T BIN and not 293 BIN. There is a small chance that your receiver might be a Pansat 2500A clone and not the real thing. |
|
New member Username: Moej1991Post Number: 1 Registered: Jun-07 | hos everybody doing |
|
New member Username: Moej1991Post Number: 2 Registered: Jun-07 | im da best person 2 ask 4 help wit ur problems wit tv |
|
New member Username: Moej1991Post Number: 3 Registered: Jun-07 | if any body thinks im wrong com c me niggas |
|
Bronze Member Username: SrpskkisiinPost Number: 20 Registered: Mar-07 | keys are about to change, check and go to forum, and find dishkeys section for newest keys |
|
Bronze Member Username: K98Post Number: 34 Registered: Jan-07 | need keys for d.n. out 11:50 am 6-14-o7 |
|
Bronze Member Username: BarbadosPost Number: 21 Registered: Aug-06 | Hi all need keys for Pansat |
|
New member Username: VinodtiwariMississauga, Ontario Canada Post Number: 1 Registered: Jun-07 | new keys please}}} |
|
Bronze Member Username: K98Post Number: 35 Registered: Jan-07 | nalin you are the best thanks #s r working |
|
Bronze Member Username: BarbadosPost Number: 22 Registered: Aug-06 | Hi cotton coots do u have the keys does anyone have the keys thanks Bajan |
|
Gold Member Username: NydasPost Number: 2839 Registered: Jun-06 | DN (Provider ID 0101) Key 00: (86) 3A 50 1C 03 02 07 30 A6 75 5A 13 22 32 E3 6E A5 Key 01: (96) CB FB 84 C0 97 81 54 5E 41 7F 6A 72 B0 2D 0C BC Bev (Provider ID 0901): Key 00: (86) E3 56 7B 2F 6C C1 51 FF D9 42 4D 8A D3 3E 44 C5 Key 01: (96) F1 69 FA E9 5F 6E 33 94 5E 28 F3 C4 99 5A 00 F5 |
|
Bronze Member Username: Silverfox62Kentucky Post Number: 17 Registered: Aug-06 | dish keys arent working anyone have the keys?? |
|
New member Username: VinodtiwariMississauga, Ontario Canada Post Number: 2 Registered: Jun-07 | did anyone have the new keys please thanks |
|
Bronze Member Username: TonytoyPost Number: 26 Registered: May-06 | Hi Vinod: Nalin has just posted the keys for DN and BEV. |
|
New member Username: MagicmerajMississauga, ON Canada Post Number: 6 Registered: Jun-07 | THEREPO you are the best thanks it's working. |
|
Bronze Member Username: SrpskkisiinPost Number: 21 Registered: Mar-07 | Yea folks those keys work, but there is a trick to it, just visit my forum at and go to dishbev keys thread; |
|
Gold Member Username: NydasPost Number: 2840 Registered: Jun-06 | You do not need to join other forums for keys, and the instructions are available at most forums. |
|
New member Username: Bobby5612Warsaw, In United States Post Number: 2 Registered: Jun-07 | i the one who have the fortec ulta i download the 293t but the receiver is still shuting down when i hit the ok button after putting in the keys can someone help me |
|
New member Username: Allen9Toronto, On Canada Post Number: 3 Registered: Oct-06 | new key please? |
|
Gold Member Username: NydasPost Number: 2843 Registered: Jun-06 | bobby gordon: 1. Note down your DisEqC settings if any. Do factory reset. 2. Install factory BIN or 280T BIN 3. Install 28oT BIN. 4. Do user settings including time, date and time zone. Do disEqC settings if any. 5. Install 293T BIN. 6. Scan at least one satellite. 6. Set autoroll on, auto TP off 7. Switch off at back - wait 40 seconds. Switch on. 8. The keys will auto roll. 9. Scan other sattelites. Make sure your files are unzipped. Use BL updater 1.4 and straight cable. Always WAIT, WAIT, WAIT at the end of an upload to the receiver. Best of luck |
|
Gold Member Username: NydasPost Number: 2844 Registered: Jun-06 | There are no new keys since my last post yesterday. |
|
Bronze Member Username: Vazman4uPost Number: 18 Registered: Jun-06 | Nalin, Please read my post that I posted earlier. My real question is, Would your bin or any other setting cause you not to get a signal?Or will you get a signal no matter what software is installed on the pansat 2700A? Please help. I respect your suggestions. |
|
New member Username: AmilPost Number: 1 Registered: Jun-07 | Hi Every one my name is amil and new to FTA system please don't make fun of me if I asked stupid qustions. somebody installed the system and didn't give any instruction. |
|
New member Username: El_limiteCanada Post Number: 2 Registered: Feb-06 | does someone have the new keys? |
|
New member Username: Bobby5612Warsaw, In United States Post Number: 3 Registered: Jun-07 | nalin i tried to do what you said to do but it didnt work, the autoroll start counting then the receiver cut off do you have any more idea.thank |
|
Silver Member Username: AnaiTX United States Post Number: 168 Registered: Jun-05 | actual keys? please |
|
Bronze Member Username: WineskmPost Number: 12 Registered: Oct-06 | I've done a Factory Reset without writting down the DisEqC settings. What can I do to get them right? KmW |
|
Gold Member Username: NydasPost Number: 2846 Registered: Jun-06 | Joe Vazman : Incomplete installation of the software followed by possible change of direction of your dish. The best I can suggest now is to reinstal the BIN and then do a repositioning of the Dish to aim it properly. |
|
Gold Member Username: NydasPost Number: 2847 Registered: Jun-06 | bobby gordon: When autoroll does not function properly, you should turnit off, do a "Set default keys" - then enter the Key00 and Key 01 manually. |
|
Gold Member Username: NydasPost Number: 2848 Registered: Jun-06 | KmW: You can look at the switch and note down the physical connection. Alternatively try setting Port 1 to something such as 119W and see if you have good quality, then try scanning. If you have time and do not want to climb on tothe roof, trial and error method works. |
|
Bronze Member Username: WineskmPost Number: 13 Registered: Oct-06 | Nalin, thanks, I have access to my antenna from the ground. Here are the some of the settings on the menu of my LTU. LNB Type: Local-Freq.: DiSEqC #: Skew: TP: I show Echo 8.1/kU with a Level of 79% and Quality of 96%, and Echo 7/kU with a Level of 80% and Quality of 89%. What is the best way to get all the settings right? Thanks Again, KmW |
|
Bronze Member Username: Colo_coloPost Number: 67 Registered: Jun-06 | does anyone has new keys for dish? |
|
Gold Member Username: NydasPost Number: 2850 Registered: Jun-06 | The last valid keys for DN were on 13th June and have been posted. |
|
Silver Member Username: JpzMTL, QC CAnada Post Number: 209 Registered: Jun-06 | Hi to all |
|
Bronze Member Username: VlemarMississauga, Ontario Post Number: 28 Registered: Nov-05 | all channels seem to have gone off line. all channels report "no signal" error when selected. Tried a couple of other sites where new keys become available quite promptly but with no success. I watched the channels with the keys posted on June 13 until wee hours of Sunday. Hopefully new keys will be posted soon. |
|
Bronze Member Username: GusificationPost Number: 50 Registered: Nov-06 | anybody have new keys? |
|
Bronze Member Username: VlemarMississauga, Ontario Post Number: 29 Registered: Nov-05 | any idea if a new bin is required this time around. all the sites continue to post keys effective as of June 13, 2007. seems encryption algorithm may have been changed. any insight into what has transpired will be greatly appreciated. |
|
Bronze Member Username: TherepoFtaview.com Post Number: 60 Registered: May-07 | Diknet hasn't changed keys or anything else since the 13th. You have some other problem. "No signal" sounds like NO SIGNAL! not "scrambled channel". Check your antenna quality/strength levels. |
|
Gold Member Username: NydasPost Number: 2851 Registered: Jun-06 | I am confirming that there is no DN keys change since 13th June and there are no missing channels. |
|
Bronze Member Username: HvsPost Number: 25 Registered: Aug-06 | All channels are reporting "No Signal". Keys seem to be ok. But am getting 0 quality all of a sudden. And after 5 hrs without doing anything everything is ok........... But now again after watching for 2 hrs its all gone again with 0 quality....... I don;t understand the problem. Any help is really appreciated. |
|
New member Username: Bobby5612Warsaw, In United States Post Number: 4 Registered: Jun-07 | hello nalin, i tried to do that enter the key manually and the receiver still shut it self off, when i hit the ok button i got to go in the back of the receiver and turn the power back on, need help thank |
|
Bronze Member Username: Rainman62Post Number: 14 Registered: Nov-06 | I'm having same problem too. All Sats 119, 110, 61.5 no signal 0 quality/strength. If I turn off the receiver for a min or so then turn it on, the signal will come back for about few sec then everything go off again. |
|
Bronze Member Username: Rainman62Post Number: 15 Registered: Nov-06 | BTW, I have CS5K |
|
Bronze Member Username: TherepoFtaview.com Post Number: 62 Registered: May-07 | Coolsats will power off if there is a short somewhere in your connection to LNB. Or... If you're running DPP LNB(s) or dp34 switch you should have DN receiver connected at the same time to supply power requirement. That means you can't just unplug coax from sub box and plug into fta, as it will often work for a few minutes, then nothing. And if it works you are putting strain on your box anyway, so keep sub box connected, and run another cable for fta. |
|
Gold Member Username: NydasPost Number: 2852 Registered: Jun-06 | bobby gordon : You probably do not have your date, time and time zone set properly and with wrong time you are going into a never ending EPG fetch. Another problem many people get into is not waiting long enough after an upload of a BIN. Always when autoroll misbehaves in any way, the best thing to do is 1. Set date, time and time zone. Blind Scan if necessary. 2. Turn autoroll and autoTP off 3. do "Set default keys" 4. Install keys manually (Key 00 and Key 01) and SAVE. 5. Turn receiver off. 6. Turn it on after a minute. If you still have problem, it would seem that you did not do the process of uploading the BIN properly. All this applies to people who have good working setup. If your initial set up has changed, then you have intorduced other variables. |
|
Gold Member Username: NydasPost Number: 2853 Registered: Jun-06 | SamS: Note what Therepo has said above. This is the first time somebody on this forum has confirmed that with some DN equipment and LNBs, you need to power the system separately for FTA receivers to work. I have been aware of this problem notably with Pansat 3500 and some models of Viewsat and it seems that the C00LSATS may also have the same problem. |
|
New member Username: RatPost Number: 7 Registered: Jun-07 | My quality went out. I changed my a dish direction and my quality came back 90%, but for Echo 7/ku 119, I am missing a lot of channels. I loaded all of the other Echo Satellite and they all mostly came in with all the channels, but the channels that I really want are on 7/ku. Why is some TP's Quality 0 when others is high? How can I get all the proper channels for 7/ku? |
|
New member Username: RatPost Number: 8 Registered: Jun-07 | also, my DiSEqC is set to Off. My 22khz is also set to off. My positioner Setting is on Disable. Does this mean anything? |
|
Bronze Member Username: Rainman62Post Number: 16 Registered: Nov-06 | Therepo and Nalin, sorry, I don't understand what you mean with "so keep sub box connected, and run another cable for fta" I have been running my cs5K for almost 6 months with no problems with signal of ~97% on all LNBF. I was out of town over the weekend, so what happen suddenly? I have 3 receivers in my 2 homes (I work in different town), 2 receivers are working flawlessly, and only mine have stop working. Will resetting the receiver and re-scanning would fix the problem? |
|
Bronze Member Username: HvsPost Number: 26 Registered: Aug-06 | don;t try to rescan..... SamS I am having the same problem right now as I mentioned in my prev. post. I tried to reinstall everything again by doing factory default settings. But then now I am also not able to scan as the quality is 0% & so its not taking any channels or TP while scanning. In my case also this "No Signal" error came in the weekend & then it again disappered for about 2 hrs & then again it came on the screen killing my happiness. |
|
Bronze Member Username: HvsPost Number: 27 Registered: Aug-06 | any help in this matter would really be appreciated.... |
|
Bronze Member Username: Rainman62Post Number: 17 Registered: Nov-06 | I'm shocked what could happen out of the sudden over the weekend? It seems like someone disconnected the cable except when you turn the receiver off and on, the channels will come on for a few sec and then dissapear. I did a reset this morning Harry, and now I have no channels and no signal. Harry, have you tried bypassing the db34 switch? (I'm at work now and cannot try anything till later today). Does anyone think the problem lie with the swtich? I'm sure it's not dish alignment, because it's set tight and we had no bad weather other than heat. Anyone else is having similar problem beside Harry and I? |
|
Platinum Member Username: LklivesPost Number: 10012 Registered: Jan-06 | Nalin said above... "This is the first time somebody on this forum has confirmed that with some DN equipment and LNBs, you need to power the system separately for FTA receivers to work." Well thats BS!!!!!!... It has been posted here THOUSANDS of times that DPP LNB's (DN equipment) need an additional power source for the FTA receivers to operate..in fact myself and PRFRMNJ constantly advised people of this! |
|
Bronze Member Username: Rainman62Post Number: 18 Registered: Nov-06 | what do you guys mean to power the system separately? please advise. |
|
Platinum Member Username: LklivesPost Number: 10017 Registered: Jan-06 | It means that U need to also connect a DN receiver and leave it powered ON always...as the DN receiver supplies power to the Dish Pro Plus LNB's, that a FTA receiver cannot always do alone.... |
|
Bronze Member Username: Rainman62Post Number: 19 Registered: Nov-06 | That's not a good news, where am I going to get a DN receiver? ebay? maybe. Any particualr model?do I need a service? |
|
Platinum Member Username: LklivesPost Number: 10019 Registered: Jan-06 | no service needed ...and any OLD DN receiver will do.. DPP LNB's are a pain.. |
|
Bronze Member Username: Rainman62Post Number: 20 Registered: Nov-06 | That's why in my other home the 2 recievers are still working because I installed legacy LNB to the dish500 for 119/110 and another for 61.5 connected via dp34 switch, instead of the DPP. Well Thanks LK for your advise. Let me get busy and start searching for DN receiver. |
|
New member Username: Bobby5612Warsaw, In United States Post Number: 5 Registered: Jun-07 | hi again nalin i tried the way you said to do but when i go to do set default key my receiver go out |
|
Platinum Member Username: LklivesPost Number: 10021 Registered: Jan-06 | Dp 34 switch is for Dish Pro LNB's not Legacy LNB's.. good luck...U should be able to pick up an old DN receiver from a tag sale, flea market for $25...and don't worry about a card for it.. |
|
Gold Member Username: NydasPost Number: 2856 Registered: Jun-06 | SamS: I had posted the following about 4-5 months ago, but at that time LK and his cronies wantedto laugh at me instead of accepting it. ON THIS FORUM, I had attempted about 4 times to alert people to the power draw of DN equipment and in particular the LNBs with DP34. So LK, stop taking credit for something you were riduculing only a few month ago. The following is part of my previous post on this subject. http://www.microyal.com/dp-34a-instal-istrn.jpg The DP34 gets its power from the receiver, which should be on for the switch to work. You might want to consider putting a separate power supply to DP34. You might also consider using a DP3437 dishpro adaptor, connect to one outlet of your DP34 and power it separately. " |
|
Platinum Member Username: LklivesPost Number: 10028 Registered: Jan-06 | nalin...U got some big lying gonads trying to take credit for something PRFRMNJ and myself were posting.. and U in fact were arguing AGAINST us about the need for more power!...U are a low life LIAR!...two faced phoney bi*tch! Don't even talk to me...u disgust me! |
|
Gold Member Username: NydasPost Number: 2858 Registered: Jun-06 | LK: I have ALL the posts of that time and YOU were the ones who did not accept my statement for the need of extra power. I am saying: Do not attempt to take the credit for something you were totally ignorant of and were ridiculing. Go and take you paranoid psychotic, and get OFF this thread. |
|
Bronze Member Username: ChechiPost Number: 25 Registered: Apr-06 | I am buying a new receiver, and would like to Know if a Pansat 2500A is still relevant, because I can buy it with 40 dollars. So I am thinking about the availability of the software in the future; I mean new BIN, etc.. Or do I need to upgrade to pansat 2700? Thank you in advance for your help. |
|
New member Username: RatPost Number: 9 Registered: Jun-07 | Can someone help me from my earlier post? |
|
Platinum Member Username: LklivesPost Number: 10033 Registered: Jan-06 | rat...the bottom line is....to start with, U must realign the dish correctly and input the appropriate dish/antenna settings into your receiver, along with proper cabling and switch....U need to go to another site and read the manuals..there are NONE here...GO READ THE... "RECOMMENDED REPUTABLE SATELLITES SITES" thread here.. whatever u do, do NOT listen to nalin...she has ruined many people's receivers with her always incorrect info.. |
|
Gold Member Username: NydasPost Number: 2859 Registered: Jun-06 | LK: Get off this thread. You are the one responsible for ruining receivers when you did not know about the power supply problem with Pansat 3500. YOU start reading in the forums you advise others to read. Your information and knowledge is stale and what little you post is C/P from others. You are PLAGIARIST and a LIAR and now trying to take credit for things you did not know about. Go somewhere else with your lies. |
|
Platinum Member Username: LklivesPost Number: 10041 Registered: Jan-06 | nalin...STFU...and go away!...u just told a newbie to Jtag a receiver with a simple fix nite rider lights problem...he most likely would have destroyed his receiver if he had listened to U...and EVERYONE chided U for your WRONG INFO once again...get the hell out of these forums! |
|
Bronze Member Username: Rainman62Post Number: 21 Registered: Nov-06 | You guys LK and Nalin, you always argue and always fight, I've been watching this forum for almost 6 months now, between both of you always fight, fights and more fights. Do you guys agree on something? Sometimes, I'm wonder if you knew each others and faking the fights. |
|
Platinum Member Username: LklivesPost Number: 10048 Registered: Jan-06 | Its NOT a 'fake" for sure...nalin is very dangerous with her bad info constantly...IU've ben doing this stuff at many sites for many years LONG before nalin ever even heard the word "satellite"..SHE IS JUST AN EGOTISTIC OVERBEARING CONTROL FREAK WHO IS totally OUT OF CONTROL...she's an embarassment to herself and this hobby...she would be banned from any site that I admin at.. |
|
Gold Member Username: NydasPost Number: 2868 Registered: Jun-06 | SamS: Initially I was not aware that your problem might be related to DP34 switch and/or DN LNBs and their power draw. I had posted many months ago a well researched statement - If you are using DN equipment and DP34 switches, you may have power problems with FTA receivers. Many people are switching from DN receivers to FTAs and running into this problem. Therefore, in all cases it is prudent to advise people to power the DP switch separately. LK and his cronies, who had no idea about this problem ridiculed me, insulted me and pretended never to accept it. During those day 2-3 clients had their POansat 3500 damaged because they believed that LK and his cronies were right and I was wrong. Now the same LK is trying to tell everybody that he always knew it and had always advised it. He is a Plagiarist and a liar of the worst kind. I believe in playing it safe. There is a probability of damage to your receiver if the DP34 is not powered properly and I do not want to take any chances. The extra power does not cost too much - it can even be an old discarded DN receiver. |
|
Bronze Member Username: Rainman62Post Number: 22 Registered: Nov-06 | I have an old DN 3000 reciever in the basement (that's a lagacy receiver), will that work? I was reading around and people are saying that I need a receiver that can support and power DPP (in other words not a lagacy one). What's your thought on this? In regard to a power inserter, any idea where to buy those? and what's better a power inserter or an old DN reciever? Thanks |
|
Gold Member Username: NydasPost Number: 2870 Registered: Jun-06 | Connect it up as shown in this diagram and see if it works. http://www.microyal.com/dp-34a-instal-istrn.jpg |
|
New member Username: MagicmerajMississauga, ON Canada Post Number: 7 Registered: Jun-07 | I want to now the size of the dish and LMB for this angles (61.5º,77º,105º, 110º, 118º,119º,121º,129º, 148º).} |
|
Bronze Member Username: Rainman62Post Number: 23 Registered: Nov-06 | are you serious? there's no one dish for all of these. I know (110, 119, 121 or 105) are one superdish 61.5 is a single dish 300 or dish 500 Others I'm not sure |
|
New member Username: Zidane88Post Number: 1 Registered: Jun-07 | Hey guys, I haven't gotten any signal from the 119 dish for three days. I tried turning the reciever off and then turning it back on, but the problem presists. The 110 is working just fine. I have seen people with same problem on this forum as well. Can you guys help me please?! |
|
Bronze Member Username: Rainman62Post Number: 24 Registered: Nov-06 | I'm assuming you used to have signal on 119 and now you don't. Do you have dish 500? what kind of switch do you have? I'm assuming either your wire or the switch gotten bad. I heard the switch get bad every now and then. Try connecting the 119 directly to your reciever and see if you have a signal (bypass the switch). |
|
New member Username: Zidane88Post Number: 2 Registered: Jun-07 | I got no idea what switch I have. But as you said, the signal on the 119 is now completely gone and it has nothing to do with the keys. I'll talk with my brother; he knows about this much more than I do. I'll get back to you. |
|
Gold Member Username: NydasPost Number: 2879 Registered: Jun-06 | magicmeraj : If you want all these Sats, try a 30-33" Dish with a motor. |
|
New member Username: MagicmerajMississauga, ON Canada Post Number: 8 Registered: Jun-07 | Thanx for the answer Nalin but I want to no about the size of the dishes there r some in the market like 18" 22" 24" 30" 33" & 39". So for which angle we use all this Dishes. |
|
Gold Member Username: NydasPost Number: 2887 Registered: Jun-06 | I did say that the size of Dish should be 30-33". You then motorise it and you can have all the above Sats. Motorised dishes are controlled with a controller and you swing it to the Sats as and when you need a channel for viewing, so angle is not as relevant as it is when setting up a fixed Dish. From the level of knowledge you have about this technology, it is best you get an installer to install it for you. The approximate costs are about $100 for Dish about $150 for motor and about $80 for installation. Receiver costs vary between $100 to $250. |
|
Platinum Member Username: LklivesPost Number: 10087 Registered: Jan-06 | Motorised dishes are controlled with a controller and you swing it to the Sats as and when you need a channel for viewing, so angle is not as relevant as it is when setting up a fixed Dish. LMAO...are U for real?....U are dumber than dumb! |
|
Bronze Member Username: SccrskillsPost Number: 46 Registered: Dec-06 | new keys anybody |
|
Bronze Member Username: SccrskillsPost Number: 47 Registered: Dec-06 | i was watching an important soccer game and picture went out please need new keys fast |
|
New member Username: JohnkapoPost Number: 4 Registered: May-07 | new keys pls. for 20th june |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics