B-75 is a new boot file for Pansat 2700. You need to use it with a different loader 27.02. After loading it you need to install the latest BIN 203. Read the instructions very carefully as the procedure can be a bit tricky.
It is not as tricky as some people try to make it seem. This is nothing more then upgrading the boot file using the "Hard Boot" method since you need to do this without the receiver booting and then performing a regular flash to load the bin. Here are the instruction and you can find the files at just about any reputable site.
Boot upgrade Guide for 2700A/E models from current b-70 to b-75.
2. Open new [ Blacklist STB Updater Version 27.02 X-87BL.exe].
3. Click Select File and open Boot_2700A (b75) _ (07)0310 new boot file.
4. Turn the receiver power ON and click Write File and wait until Download Completed OK will appear.
5. Front LED will display moving b-7-5 left to right if upgraded succeeded.
6. Open new api bin file matching with b75 boot version,
(Any api version dated on or after Mar 10, 2007 and click Write File.
Wait until Download Completed OK appears.
Front LED will display b-7-5 and channel number will appear shortly.
If your receiver is in Factory Default Condition, front LED will appear ON shortly.
8. 2700A/E (IR) all models can be applied.
=NOTE(S) =====================================
1. Old version v27.01 will not work.
2. b75 boot upgrade needed only one time for each Receiver.
=WARNING ====================================
Do not interrupt the main power until download completed OK appears on the PC screen. It may damage the receiver seriously. If download fail appears, check the api bin file date if it is old version before Mar 10, 2007. It should be Mar 10, 2007 or after dated one.
B75 boot came out about March 10..its just a newer boot file that is now required on all bins released since then..its a 1 time upload only!...I have the B75 boot package linked in your "hey all" thread..
B-75 is a new boot file for Pansat 2700. You need to use it with a different loader 27.02. After loading it you need to install the latest BIN 203. Read the instructions very carefully as the procedure can be a bit tricky.
