|
Bronze Member Username: TechmeMIAMI, FL USA Post Number: 60 Registered: May-07 | i did an install i get perfect 110 119 problem is when i do auto scan on 110 i dont get ppv on 110 on 119 i can get any of the espn im using bin 142. |
|
Platinum Member Username: LklivesPost Number: 10223 Registered: Jan-06 | very few ppvs on 110...mostly all on 119... go to |
|
Bronze Member Username: TherepoFtaview.com Post Number: 94 Registered: May-07 | Here's a good guide to DN channels: http://www.dishchannelchart.com/ |
|
Bronze Member Username: TechmeMIAMI, FL USA Post Number: 61 Registered: May-07 | i see the problem im confused i have 99 signal on some tp and on the ones for espn there is none what could be the problem. |
|
Platinum Member Username: LklivesPost Number: 10241 Registered: Jan-06 | dish alignment must be off a little...or some bad cables/connections.. |
|
Gold Member Username: NydasPost Number: 2918 Registered: Jun-06 | LK: Your head alignment is off. Get it straight and then answer the question. You said "very few ppvs on 110...mostly all on 119... " There are at elast 30 PPV and about 10 VOD on 110W. |
|
Silver Member Username: AntiscumsAtlantic City, NJ Post Number: 189 Registered: Dec-06 | NALIN PLEASE DON'T PISS HIM OFF now |
|
Silver Member Username: HardrockstrikerPost Number: 928 Registered: Apr-06 | it sounds like you are not catching both satellites. check alignment and antenna settings (different satellites on different switch ports). also, channels move every so often so make sure autotp is on and that you are catching both sats. |
|
Bronze Member Username: TechmeMIAMI, FL USA Post Number: 62 Registered: May-07 | both sats are on 99 i loaded a channel list on espn there is no signal on every other there are 99 i hooked up a pansat 2500 gets espn i hooked up diffrent cs 5000 same problem hooked up a viewsat works on espn tried a cs 6000 same problem im lost here what other bin can i try other than 142 143 or 144 |
|
Silver Member Username: HardrockstrikerPost Number: 931 Registered: Apr-06 | don't use a channel list. instead, delete all your channels and then do a sat scan for each satellite. also make sure autotp is on. |
|
Bronze Member Username: TechmeMIAMI, FL USA Post Number: 63 Registered: May-07 | thanks for the help everything working fine. |
|
New member Username: MatitoPost Number: 1 Registered: Jun-07 | Nalin it seems like you r the # 1 I see you posting a lot of answer!I got 1 big problem my csat 5000 stop showing the ch only ch 101 and the freeview ones I have the right keys signal almost max on 110 119 done several reset factory default new software install . The receiver download everything but theres something else what i cant figure it out please if you dont mind and help me out on this one ? thanks a lot |
|
Gold Member Username: NydasPost Number: 2937 Registered: Jun-06 | matito jam : I replied your email |
|
New member Username: MatitoPost Number: 2 Registered: Jun-07 | Thanks Nalin but I dont see the replied where did you send it ? |
|
Gold Member Username: NydasPost Number: 2938 Registered: Jun-06 | I had an email from "matito", and I replied to it. |
|
New member Username: MatitoPost Number: 3 Registered: Jun-07 | sorry Nalin I never received nothing can you post your help here thanks again !!! |
|
Gold Member Username: NydasPost Number: 2940 Registered: Jun-06 | You could have a problem with alignment if you are getting different channels to what you are used to getting. Anyway, if BIN 144 does not work, you could go back to 142 or 143. Also do not use channel lists, but do a blind scan. |
|
Silver Member Username: TherepoFtaview.com Post Number: 103 Registered: May-07 | If only the free channels are viewable, the dish alignment is OK. Just: -make sure latest bin. 144 rolls fine on 5K. -make sure DN autoroll is ON in the options. |
|
New member Username: MatitoPost Number: 4 Registered: Jun-07 | thank you guys I will try it rigth now |