1:SOBE SAID: "my clone 2500 displays nightrider lights only can anyone help " Do NOT try 222 or 224 BIN. Try BIN 280T. If it does not go in, you need to JTAG.
Nalin has been trying to tell people about DishPro and DishProPlus equipment yet, has no clue how this operates or what the actual power requirements are. Not to mention the last person Nalin tried to help almost JTAG'd their receiver for no good reason whatsoever.
Why would anyone listen to you? When you are ready to do some testing and forget about what you read, you may be able to grasp what this is all about...
No one here is perfect, including myself. Why don't you guys put this to rest? "PLEASE" We are men, not litte kids trying to help others. enough is enough already.
sobe, fumb duck are LK, LITTLE KID playing big games with big sharks, will be crushed soon, order will be restored soon, LK has few other user names, will be profieled/cleaned shortly
how could you say that, biggest help i can provide is to get rid of you, you could be helping minors to get their hands on p0rnographic satellite channels, if you want to go that way, i can get you arrested within few complains, don't play with the big boys, go fly a kite or play with nalin, stay away from John Matarazzo, you can get hurt LITTLE KID
how did this thread turn into anything other than showing how wrong Nalin is. John start your own thread. I dont want to come to this thread and see you going after anybody this one is about Nalin.
PRFRMNJ and sobe: You are both Spanish speeaking and do not understand clearly the meaning of phrases and words. People at various levels of expertise do certain things that others at a different level of expertise would not do.
The question was about the use of jtag. Here is a C&P from none other than Chancynand on this subject. Instead of laughing try and learn, otherwise keep your mouths shut.
Talking about 294T, Chancynamd said: "It will only give you Knight Rider Light as the checksum and file length are not right. I have fixed both to see what was changed in the file and still will not run the box and had to jtag it back."
your an idiot. you didnt understand my question.i ask my clone 2500 displays nightrider lights only can anyone help. and for your info it Chancysand NOT Chancynamd OR Chancynand
sobe: You are the one not understanding English and also what seniors like Chancysand do under the circumstances of "my clone 2500 displays nightrider lights". It is written above in a C&P, so just read and shut up. In case you did not understand it properly, the 294T BIN was proposed by somebody as an upgrade for clone 2500, Chancysand tried it and it gave him "nightrider lights" and he "had to jtag it" . A grad 6 schoolboy can understand that. You do not have the simplest of understanding of language and you have the nerve to question me about my knowledge and/or ability ot advice. Go back to your Spanish forum, where at least you will understand what is being said.
you have the nerv to try to lecture me. camel toe i was born here, and can spell better than you. now i know why people hate you. and look who is being racist telling me to go back to the spanish forum. who died and made you camel god. learn how to write then come lecture me.
Sobe - Nalin is just mad that everyone sees how dumb she/he/it really is. of course Nalin trying to tell someone how to spell and use proper grammar is about as sound as the advice provided here over the past year.
LEARN THE LANGUAGE AND FTA BEFORE SHOOTING YOUR MOUTH.
Oh and by the way, get a typing tutor or something, because you suck at it...
PRFRMNJ: You should feel proud that your misinformation was corrected by no other than Chancy. Next time be current with your knowledge before you decide to poke fun at others.
I think you should go read "therepo's" post again. Obviously not only you can't write, but comprehension passed you "Bye-Bye" long time ago... But let me repost that so you can read it again - "Ok I corrected the checksum in this file and corrected the file lehgth were I found got deleted and load file to my Ultra. I did not get it to work however and had to jtag my ultra back as it would not take a normal flash. It did not kill my unit but for some reason would not take a flash so I just jtaged it to save time."
He did this not because he had to, but to save time. Good Lord, learn how to comprehend...
PRFRMNJ : And you should read my post again. I suggested exactly the same thing as Chancy. I have known you to be stubbornly blind when information is presented contrary to your viewpoint, because you never want to see the truth. As I said earlier. Learn to think. Don't be bound down by dogma, and learn to be flexible. Above all, knowing "how to" is but a small part of learning - knowing "why" is the real learning.
They say you can take the horse to the water, but you can't force him to drink! Yeap... It's okay, we all know your limitations....
Your post recommended that a n00b performed a JTag when he didn't need to. Just because someone who has been doing this for a long time decide to take a short cut to save time, doesn't mean that you recommend anyone to do a process which is unnecessary. But then again, you only read what you want to and interprete as you wish...
BTW Chancy had to do this because he decided to test a file claiming to be a new bin (something I find interesting as he normally just looks at the file) but nevertheless, he actually TESTED it, something you have very little knowledge of doing... LMAO
Okay, I'm done amusing myself with you. Back to ignoring you until I get bored...
SOBE SAID: "my clone 2500 displays nightrider lights only can anyone help " Do NOT try 222 or 224 BIN. Try BIN 280T. If it does not go in, you need to JTAG.
Obviously some blind persons do not read there the words TRY BIN 280T. Then they ignore the words "If it does not go in" and only read the word "JTAG" and panic. Thnese people call themselves "testers".
Knowledge of testing: If you read therepo's analysis of Chancy's statements, it is quite clear that he had tested enough toknow that he can use a BIN like 293T instead of factory BIN. You should all learn, that particularly in the days of 290T there were lots of flashing problems, and who was the one testing? I was the one who found that for most Pansat 2500 clones, when they got problems with the split BIN, they could and should use 280T to revive it to equivalent to the pristine state for all practical purposes. You do not have to load the factory BIN. I also discovered that all the Pansat clones jumped to life when 280T was installed. So dear Mr. PRFRMNJ : you are the one who is terribly deficient in testing and unable to accept well thought out advice given by me and confirmed by Chancy as his way of thinking.
There is a stubornness in you because you are blinded by hate of a person - hate of a personality, and hate of somebody who contradicts your beloved LK.
Here you are telling someone about your information concerning SuperDish. WRONG INFORMATION AT THAT...
Nalin Nyda Gold Member Username: Nydas
Post Number: 1890 Registered: Jun-06 Posted on Friday, February 16, 2007 - 07:38 pm: ________________________________________ My information is that your Superdish is good for two satellites, usually 110 and 119. The newer Plus dish is good for three. For the third satellite, the recommendation has been that you should use a separate dish and point to either 61.5 (echo 3 eastern regions) or 148 (western regions).
The Dish500 is what is used to get two sats that are 10 degrees or less apart and if you use the Dish500 Plus then you get up to three sats, but IT IS NOT THE SUPERDISH...
Here is a member asking you for help and rather then actually helping him you send him to read up? I guess you didn't know how to guide him and decided it was better if you told him to pay someone. Way to go Nalin....
Ahmed ahmed New member Username: Drgaili
Post Number: 10 Registered: Aug-06 Posted on Friday, September 29, 2006 - 12:51 am: ________________________________________ Hi Nalin Nyda, i do have c**lsat 5000, and have no idea about the steps that need to be taken in order to transfer this data to the reciever,could you please tell me in 1,2,3 format how to do that, and do i need special software to do so ?.. Thank you for your time Ahmed
Nalin Nyda Silver Member Username: Nydas
Post Number: 652 Registered: Jun-06 Posted on Friday, September 29, 2006 - 12:59 am: ________________________________________ Ahmed Ahmed: I do not know your level of expertise. My suggestion is that you go to one of the followiing sites and readup about the uploader for your collsat5000 and about how to. You will need to download the uploader and install it on your computer. Then, if you are confident, you could try. Many people get into problems uploading, and you are usually better off having a friend with you or pay somebody $20-30 for it. http://www.totalfta.com (registration) There are many other sites - but essentially you will read up on the how to.
The real funny thing about this is that we've told people to read and learn and you have turned around and jumped on our case for doing so. That's about as big of a double standard as I've seen.
In this post you tell a member what to do which is really a guess on your part since you didnt' take the time to ask his location and for that matter his setup. This is what we call shooting from the hip which has already cost some people problems because you don't take the time to ask questions ----------------------------
Jonathan Perez Bronze Member Username: Liljdominican338
Post Number: 21 Registered: Jun-06 Posted on Sunday, October 01, 2006 - 08:39 pm: ________________________________________ nalin nayda I have pansat 2500a, Its program to pick up satellite 119W and 110W how can i program my pansat to pick up satellite 121W also. thanx
Nalin Nyda Silver Member Username: Nydas
Post Number: 668 Registered: Jun-06 Posted on Sunday, October 01, 2006 - 09:57 pm: ________________________________________ J. Perz: For 121W you need a 30-32" dish. The Kuband needs a different LNB than the C band. You would most likely have to buy a new dish with the LNB and install it facing properly, bring a cable from it to a DisEqC switch (might as well buy a 4 input switch). Bring the other cable into the switch, and then bring the outlet to your receiver. If you already have disEqC switch (not Dp34) you can just attach the cable from 121 dish to the third input. With a DP34 switch things a bit more complicated. Let me know, if that is your problem, and I will post again, although I have posted it a couple of times before. If your 110/119 is from a dishpro dish with special LNB this won't work. -------------------------- By the way, if he's in the caribbean (which is also a guess) the dish you recommend would never work, but for all we know he probably purchased the dish going on your advice and now has a big ashtray.
