New member Username: TankbukkakePost Number: 1 Registered: Apr-07 | About a week ago, i started losing my channels little by little. Ive put the newest keys, turnned of autoroll,and i even bought a new cable(from the satelite to the reciver)and still no luck.On some channels i get high signals but no picture and on others i get zero signal.The only thing i havent done is update the bin(i dont have the adaption)but i dont need to update it unless im putting the new keys right??? Well thanks alot in advance for any help you give me. ) Oh and ive also fooled around with the disq but no such luck |
Bronze Member Username: Wes_wPost Number: 11 Registered: Apr-07 | Hi John, You probably have a couple of things going on here. Yes you should upgrade the bin, having to enter keys is a sign and if there is a new bin out good to do. The other thing you can do is a factory default and rescan the channels, make sure to write down your setttings in antenna set up first if you don't know them by heart. If channels have moved tps this would cause you to loose the channel as well. Hope this helps |
Gold Member Username: NydasPost Number: 2515 Registered: Jun-06 | John Anthony: Your problems are proabbly with 290 BIN. Whether you have a genuine Pansat or clone, use clone safe BINs ending with T. 1. Factory reset 2. Install 280T or 281T. Do not attempt scanning or keys. 3. Install 288T or 289T. Set date, time, time zone. 4. Restore user settings. Turn autoroll off. 5. Enter Keys manually for DN/BEV. 6. Scan the satellites. You should get all channels. Venture to 293T BIN if you want to. It has good autoroll. Best of luck. |
New member Username: TankbukkakePost Number: 6 Registered: Apr-07 | So i have to get a new bin? yes it is a 290 bin. I have to change bins even if i have the right keys? where do i get 293t |
Gold Member Username: NydasPost Number: 2519 Registered: Jun-06 | Get it from Pantec or Fortec Ultra section. Also get BL updater 1.4 You will need straight RS232 DB 9 F/F cable. Get detailed instructions from the site. Get a friend to help you. FOLLOW INSTRUCTIONS EXPLICITLY. You must unzip files before using. If you need it, you can get winzip.exe from http://www.winzip.com Best of luck. |
New member Username: TankbukkakePost Number: 8 Registered: Apr-07 | will do. thanks |