I need help with my pansat2700.I have 110&119&121 but for some reason the 110$119 don't work as good.Like if I'm watching ppv and I change the channel it says no signal but my signal is full so I check the settings and I got everything how it supposed to.Then I factory set and rescan my channels again the same thing happens.Help would be much appreciated.
What is your setup? What type LNB's are you using? What type Dish? What type Antena! Need more info to help you. By the way, what is your antena configuration?
My antena settings 119 standered diseqc #1,110 standered diseqc #2,121 standered diseqc #3 but 121 is with a different lnb by it's self with another dish,110&119 both dishnetwork connected together.
Not to mention what type switch are you running? If you have the lnb above, you CANNOT use a DISEcQ Switch. Last but not least, if you have a DishProPlus LNB like this one, then that's a different story. BE SPECIFIC!
The LNB that says 148 will become your 121. You will not use any external switches and where you see Legacy 4700 you will connect your DN receiver and your FTA receiver will go where you see Pansat 3500.
In the antena settings for your Pansat the main two entries will be: