Help Please

 

New member
Username: Frmgrl

Alberta Canada

Post Number: 4
Registered: Apr-07
Loaded the new file into my Sonicview 1000, autoroll works fine for Bev but not for DN. Can anyone help me please? What should I do?
 

Gold Member
Username: Tapeman

New York, NY

Post Number: 1005
Registered: Oct-06
I'm so sorry about the bad service U R getting
Put the key by hands

https://www.ecoustics.com/cgi-bin/bbs/show.pl?tpc=2&post=1113488#POST1113488
 

New member
Username: Frmgrl

Alberta Canada

Post Number: 5
Registered: Apr-07
I put the DN keys in manually still on working. made sure had correct keys. I even checked to make sure auto roll was turned off too. DN still not working. What now?
 

New member
Username: Frmgrl

Alberta Canada

Post Number: 6
Registered: Apr-07
I meant DN not working. instead of on supposed to be not. Thanks!
 

Silver Member
Username: Hardrockstriker

Post Number: 748
Registered: Apr-06
You must have an error in your key entries somewhere. Double-check.
 

Gold Member
Username: Tapeman

New York, NY

Post Number: 1007
Registered: Oct-06
Try to reset from back switch
 

New member
Username: Frmgrl

Alberta Canada

Post Number: 7
Registered: Apr-07
Just double checked. Still nothing.
 

Gold Member
Username: Tapeman

New York, NY

Post Number: 1009
Registered: Oct-06
Turn off switch and back on again. it must of frose
 

New member
Username: Frmgrl

Alberta Canada

Post Number: 10
Registered: Apr-07
Just did the switch thing still nothing. The guide is working alright though.
 

Gold Member
Username: Tapeman

New York, NY

Post Number: 1012
Registered: Oct-06
Something must of Frose Rose

Are You Using These Keys?
Dish Network (Last Update: 2007/04/11 7:30 PM EST)

00: B8 46 82 2D 29 B6 25 87 8C B1 63 15 24 65 0D 8A

01: 53 B1 5A D5 D0 FD 53 8C 6F 19 5F DE BF 78 80 8E (Active)
 

Gold Member
Username: Nydas

Post Number: 2330
Registered: Jun-06
Rose: Soniview autoroll is workig fine.
Suggestion:
Turn auto roll off.
Put any false keys in manually - both Key 00 and Key 01 for DN.
Turn auto roll on.
Switch off receiver.
Wait for 1 full minute.
Turn receiver on and wait for keys to roll in.
 

Bronze Member
Username: Frmgrl

Alberta Canada

Post Number: 11
Registered: Apr-07
Sorry didn't work either.
 

Gold Member
Username: Nydas

Post Number: 2341
Registered: Jun-06
Rose: You must have a bad BIN upload. You should consider reloading the factory BIN and then the latest.
 

Bronze Member
Username: Frmgrl

Alberta Canada

Post Number: 12
Registered: Apr-07
Where can I get a factory bin and a good current Bin? Thanks
 

Silver Member
Username: Runnerguy

Pluto

Post Number: 167
Registered: Sep-06
Try reading a little Rose
 

Gold Member
Username: Nydas

Post Number: 2345
Registered: Jun-06
Rose: The sites:
http://www.totalfta.com (official site of Viewsat and sonicview)
http://www.dssrookie.com
 

Silver Member
Username: Hardrockstriker

Post Number: 752
Registered: Apr-06
Nalin, if what she says from her first line in this thread is true then she must have a working bin (because she gets Bev with autoroll). I'm just wondering if she ever had DN working in the past, or, if she tinkered with her receiver settings?

But you're correct, she does need to read a bit in order for her to troubleshoot.
 

Bronze Member
Username: Frmgrl

Alberta Canada

Post Number: 13
Registered: Apr-07
DN worked before I loaded Bin 257.
 

Silver Member
Username: Hardrockstriker

Post Number: 753
Registered: Apr-06
Okay, so if you're getting Bev fine, at this moment then it has to be your receiver set up or keys.

I would leave DN autoroll on because the autoroll should work with your bin.

are your lnb types set properly for your DN sats? do you have the lnbs mapped to the correct switch ports?
 

Gold Member
Username: Lklives

Post Number: 8748
Registered: Jan-06
Rose
New member
Username: Frmgrl

Alberta Canada Post Number: 4
Registered: Apr-07
Posted on Thursday, April 12, 2007 - 10:37 am:

--------------------------------------------------------------------------------
Loaded the new file into my Sonicview 1000, autoroll works fine for Bev




Nalin Nyda
Gold Member
Username: Nydas

Post Number: 2341
Registered: Jun-06
Posted on Thursday, April 12, 2007 - 02:50 pm:

--------------------------------------------------------------------------------
Rose: You must have a bad BIN upload


nalin, there U go again, talking out your azz!..
 

Gold Member
Username: Nydas

Post Number: 2348
Registered: Jun-06
LK: Buzz off: We are trying to help Rose. If you have nothing postive to say - GET OUT!!!
 

Bronze Member
Username: Frmgrl

Alberta Canada

Post Number: 14
Registered: Apr-07
Thanks everyone for your help. Problem solved. My settings were wrong. Thanks again!
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us