Viewsat not working

damindar ghumman Bronze Member Username: Dghumman Ontario Canada Post Number: 74 Registered: Feb-06	Posted on Wednesday, April 11, 2007 - 22:16 GMT i have a viewsat extreme it was working fine till 15 minutes ago and now it says signal searching do i need to put in new keys manually has the autoroll been hit please help and give the new keys that work
SatScanner Gold Member Username: Satscanner Beaversbush, Sportsmans P... Great White ... Post Number: 1706 Registered: Nov-06	Posted on Wednesday, April 11, 2007 - 22:28 GMT Try a hard reboot,It should roll and be fine on dn
Jib Silver Member Username: Ariza Post Number: 166 Registered: Feb-06	Posted on Wednesday, April 11, 2007 - 22:36 GMT mine went down too.. is it a auto roll problem or is it another ECM?
jag DHILLON New member Username: Jagmel Post Number: 10 Registered: Jul-06	Posted on Wednesday, April 11, 2007 - 23:00 GMT i think its an ecm coz my ultra down too.
damindar ghumman Bronze Member Username: Dghumman Ontario Canada Post Number: 75 Registered: Feb-06	Posted on Wednesday, April 11, 2007 - 23:07 GMT tried hard boot too but still not working tried putting in new keys too but still not working
Sean Bronze Member Username: Typertegra Vancouver, British Colu... Post Number: 27 Registered: Oct-06	Posted on Wednesday, April 11, 2007 - 23:24 GMT 86: 36 F1 D3 FB 76 4F A6 88 83 74 3F E9 CB 12 9C 5B 96: D4 94 A2 33 DD 93 91 96 ED 3C 27 59 8E 55 90 C0<--- active keys, check them 2 times. every digit.
Jay New member Username: Jay2004 Post Number: 8 Registered: Nov-06	Posted on Wednesday, April 11, 2007 - 23:36 GMT I Have the viewsat Ultra also down about the same time, does anyone know where to get the fix yet?
Gujju Bhai New member Username: Gujjubhai Post Number: 6 Registered: Jul-06	Posted on Wednesday, April 11, 2007 - 23:53 GMT Here you go... New Keys DN 00: B8 46 82 2D 29 B6 25 87 8C B1 63 15 24 65 0D 8A 01: 53 B1 5A D5 D0 FD 53 8C 6F 19 5F DE BF 78 80 8E Tested Active
Ranjeet Bins Silver Member Username: Hanz Post Number: 311 Registered: Oct-06	Posted on Thursday, April 12, 2007 - 00:09 GMT Does anybody know how to install these keys on the Viewsat Ultra? I lost all my Viewsat-related bookmarks and haven't ever installed keys on this specific receiver yet. Then again I only bought it a few weeks ago.
Jay New member Username: Jay2004 Post Number: 9 Registered: Nov-06	Posted on Thursday, April 12, 2007 - 00:16 GMT you have to manually type them in under codes, should be Nagra then dish 00 and 01... I re-installed the new keys and get picture on one channel only, if i change channels then it says "Searching for Signal"... I cant find the autoroll fix, anyone know where it is yet??? Viewsat Ultra
Rauf Muhammad Bronze Member Username: Rufidada Post Number: 39 Registered: May-06	Posted on Thursday, April 12, 2007 - 00:17 GMT New Keys are B8 46 82 2D 29 B6 25 87 8C B1 63 15 24 65 0D 8A 53 B1 5A D5 D0 FD 53 8C 6F 19 5F DE BF 78 80 8E just checked them they are working
GARY LANCASTER New member Username: Waiting4zion Post Number: 3 Registered: Feb-07	Posted on Thursday, April 12, 2007 - 00:18 GMT have installed new keys and still no work
damindar ghumman Bronze Member Username: Dghumman Ontario Canada Post Number: 77 Registered: Feb-06	Posted on Thursday, April 12, 2007 - 00:43 GMT have installed latest keys stillnot working i think its ecm does someone has some info please help
Ranjeet Bins Silver Member Username: Hanz Post Number: 313 Registered: Oct-06	Posted on Thursday, April 12, 2007 - 00:45 GMT Where do I enter these keys on the Viewsat Ultra? I'm in Code Menu. There are sets of rows for both Dish 00 01 00 and Dish 01 01 00. For Dish 00 01 00, I see 4 sets of rows: 08 09 88 89 And for Dish 01 01 00, I see 5 sets of rows: 00 08 09 88 89 Anybody know where the new keys will be entered? Sorry, this is my first time.
Danny Bronze Member Username: Wnyzfinest Post Number: 68 Registered: Apr-06	Posted on Thursday, April 12, 2007 - 00:46 GMT Upgrade for Viewsat /Sonicview ~~http://totalfta.com/~~ Pansat Soon!
Kinguyen Silver Member Username: Bones714 Somewhere fi... Post Number: 343 Registered: Mar-05	Posted on Thursday, April 12, 2007 - 00:48 GMT 08 and 09 would be keys 00 88 89 keys 01 same as for dish, ignore the 00 lines I entered the new keys in my Sonicview, the keys dont work so most likey need a new bin.
THUNDER Silver Member Username: Thunder_lightning Post Number: 202 Registered: Feb-07	Posted on Thursday, April 12, 2007 - 00:51 GMT Ranjeet... go to 01 01 00.. 00..do not enter 08 and 09 = keys 00 88 and 89 =keys 01 is active
chris rucchin Bronze Member Username: Fuideny Post Number: 41 Registered: Jun-05	Posted on Thursday, April 12, 2007 - 01:00 GMT jay turn autoroll off in the options menu
Ranjeet Bins Silver Member Username: Hanz Post Number: 314 Registered: Oct-06	Posted on Thursday, April 12, 2007 - 01:25 GMT You rule THUNDER! Thanks alot! Keys work just fine for now.
Ranjeet Bins Silver Member Username: Hanz Post Number: 315 Registered: Oct-06	Posted on Thursday, April 12, 2007 - 01:27 GMT Yep, insert the new keys and turn off autoroll. Then switch your receiver off from the back and turn back on. It'll work like a charm.
louie rivera Silver Member Username: Kato1 Post Number: 140 Registered: May-05	Posted on Thursday, April 12, 2007 - 01:35 GMT just enter keys for my viewsat ex 2000 and pansat and turn off a/r all working...finally!! kato1
Gary Mann Bronze Member Username: South2 Post Number: 25 Registered: Oct-06	Posted on Thursday, April 12, 2007 - 02:44 GMT hi guys, Having same problem as a number of people are having with VS Xtreme. I says "searching signal" on the screen. I'm using file dated 07/02/06. Any suggestion? Thanks in advance.
THUNDER Silver Member Username: Thunder_lightning Post Number: 208 Registered: Feb-07	Posted on Thursday, April 12, 2007 - 02:51 GMT Gary you need new keys...after you enter those keys in but still no picture...you need the lastest bin...your bin are a little too old..LOL But try to enter new keys in first.. DN keys- Updated: 16:00 04-11-07 (Key 86) B8 46 82 2D 29 B6 25 87 8C B1 63 15 24 65 0D 8A (Key 96) 53 B1 5A D5 D0 FD 53 8C 6F 19 5F DE BF 78 80 8E (Active) Bev keys Updated: 13:53 04-11-07 Key 0 - 36 F1 D3 FB 76 4F A6 88 83 74 3F E9 CB 12 9C 5B Key 1 - D4 94 A2 33 DD 93 91 96 ED 3C 27 59 8E 55 90 C0 (active)
Jay New member Username: Jay2004 Post Number: 10 Registered: Nov-06	Posted on Thursday, April 12, 2007 - 02:54 GMT Thanks Chris, up and running...
dino peotussis New member Username: Dinon39 Post Number: 1 Registered: Apr-07	Posted on Thursday, April 12, 2007 - 03:16 GMT Hi cas some one help me i have no trouble with the DN but i but the Bev keys and still nothing Thank you
GARY LANCASTER New member Username: Waiting4zion Post Number: 4 Registered: Feb-07	Posted on Thursday, April 12, 2007 - 21:49 GMT is there anyway to install a loader with an USB key?
GARY LANCASTER New member Username: Waiting4zion Post Number: 5 Registered: Feb-07	Posted on Thursday, April 12, 2007 - 22:01 GMT VS Ultra
Reddy Bronze Member Username: Reddy7004 Post Number: 34 Registered: Mar-07	Posted on Thursday, April 12, 2007 - 22:54 GMT Hey Thunder... Great Help and it is working fine for me after changing keys and turn off auto roll.
adam smith New member Username: Problemguy Post Number: 1 Registered: Apr-07	Posted on Thursday, April 12, 2007 - 23:50 GMT how come some channels work and then some channels says searching signal...??
Go Leafs Go Silver Member Username: Leafs_fan_4_eva , Post Number: 207 Registered: Jun-06	Posted on Friday, April 13, 2007 - 00:27 GMT downloaded the new VS 2000 bin (from dsscomunity) and it says 52 min Left on the bottom left hand corner. can anybody tell me what that means. thanks
LK Gold Member Username: Lklives Post Number: 8763 Registered: Jan-06	Posted on Friday, April 13, 2007 - 00:37 GMT either site server or your server is very slow (heavy traffic) and u will get a bad download...do it another time..
juan ramirezone Silver Member Username: Juancho Superior Lake, Northwestern... Canada Post Number: 967 Registered: Dec-06	Posted on Friday, April 13, 2007 - 00:45 GMT I read about that, somebody had the same problem y after the time past the screen became black,.
Go Leafs Go Silver Member Username: Leafs_fan_4_eva , Post Number: 208 Registered: Jun-06	Posted on Friday, April 13, 2007 - 01:56 GMT Lk, downloaded it again but when the 52 minutes were up it started again at 52. I changed the channels and some of the channels had like 288 minutes and 304 minutes. Has this happend to anyone else and should i get a bin from another site and try it out?
Gary Mann Bronze Member Username: South2 Post Number: 26 Registered: Oct-06	Posted on Friday, April 13, 2007 - 02:02 GMT Hi Thunder, Thanks for your help. New keys had it up and running. Thanks again
juan ramirezone Silver Member Username: Juancho Superior Lake, Northwestern... Canada Post Number: 974 Registered: Dec-06	Posted on Friday, April 13, 2007 - 02:23 GMT Go Leafs Go. some ppl report that problem when the STB is trying to A/R new keys whit it turned off. They turned A/R on and the message would go away. That was included in the readme notes for version DBPSW-070315P.
tony dif New member Username: Tonydif Post Number: 7 Registered: Feb-07	Posted on Friday, April 13, 2007 - 02:38 GMT The number in the bottom left is the time remaining for the show you ae watching. I don;t know what happens when it goes to 0 yet.
Audrey Bronze Member Username: Coldgirl Canada Post Number: 71 Registered: Apr-06	Posted on Friday, April 13, 2007 - 02:57 GMT Viewsat Ultra - loaded new bin with a memory stick and everything is working great. But a couple friends tried to load the new fix with a memory stick and they can't get past USB under receiver upgrade (no new window). Any suggestions to what they are doing wrong?
Hawaiian_time Gold Member Username: Hawaiian_time Kanaka freak... Post Number: 1040 Registered: Apr-06	Posted on Friday, April 13, 2007 - 03:04 GMT You do mean a usb stick? They weren't trying to put a memory stick in the card slot were they?
Audrey Bronze Member Username: Coldgirl Canada Post Number: 72 Registered: Apr-06	Posted on Friday, April 13, 2007 - 03:09 GMT USB stick only goes into 1 spot. (My instructions called it a memory stick)
Hawaiian_time Gold Member Username: Hawaiian_time Kanaka freak... Post Number: 1041 Registered: Apr-06	Posted on Friday, April 13, 2007 - 03:15 GMT oh ok. Seems like the unit is not recognizing the stick. Did they try a different stick?
Audrey Bronze Member Username: Coldgirl Canada Post Number: 73 Registered: Apr-06	Posted on Friday, April 13, 2007 - 03:19 GMT They tried my stick which works on my reciever, then they went and bought one. I put the right fix on it and when they plug it into the front it doesn't flash like mine does.
Hawaiian_time Gold Member Username: Hawaiian_time Kanaka freak... Post Number: 1042 Registered: Apr-06	Posted on Friday, April 13, 2007 - 03:23 GMT So your stick didn't work with their receiver either?
Audrey Bronze Member Username: Coldgirl Canada Post Number: 74 Registered: Apr-06	Posted on Friday, April 13, 2007 - 03:28 GMT no, but it works on mine, which I find strange.
Hawaiian_time Gold Member Username: Hawaiian_time Kanaka freak... Post Number: 1043 Registered: Apr-06	Posted on Friday, April 13, 2007 - 03:33 GMT Try a hard reboot with the off and on switch in back.
Ms najam New member Username: Gmirza Post Number: 4 Registered: Apr-07	Posted on Friday, April 13, 2007 - 03:37 GMT Dear Despi you are a winner Thanks and loads of Thanks for saving me my husband is due home soon he will be happy and my day is made by you God Bless you
Audrey Bronze Member Username: Coldgirl Canada Post Number: 75 Registered: Apr-06	Posted on Friday, April 13, 2007 - 03:40 GMT Thanks Hawaiian_time, I will let them know tomorrow. Thats the only think I didn't suggest. I will let you know if it works.
Ms najam New member Username: Gmirza Post Number: 5 Registered: Apr-07	Posted on Friday, April 13, 2007 - 03:40 GMT And Thank all of you who tried to help me I think you guys are a great team
Hawaiian_time Gold Member Username: Hawaiian_time Kanaka freak... Post Number: 1044 Registered: Apr-06	Posted on Friday, April 13, 2007 - 03:43 GMT Good luck.
Go Leafs Go Silver Member Username: Leafs_fan_4_eva , Post Number: 209 Registered: Jun-06	Posted on Friday, April 13, 2007 - 19:46 GMT downloaded the bin DBPSW-070407X but its not working! is there a different bin that works?
Hawaiian_time Gold Member Username: Hawaiian_time Kanaka freak... Post Number: 1046 Registered: Apr-06	Posted on Friday, April 13, 2007 - 20:44 GMT You can try the latest bin, DBPSW-070411X, it should work.
Audrey Bronze Member Username: Coldgirl Canada Post Number: 76 Registered: Apr-06	Posted on Saturday, April 14, 2007 - 02:59 GMT Turning off the receiver worked. The bin for the ultra needed to start with PFTAUSW the one with DBPSW doesn't work with the ultra. Thank you very much for helping us out.
Hawaiian_time Gold Member Username: Hawaiian_time Kanaka freak... Post Number: 1048 Registered: Apr-06	Posted on Saturday, April 14, 2007 - 03:12 GMT I'm glad you got the ultra working. The DBPSW-L070411X bin is for Leafs Xtreme.
adam smith New member Username: Problemguy Post Number: 2 Registered: Apr-07	Posted on Saturday, April 14, 2007 - 21:50 GMT How come on some channels work perfectly and some works for a while then freezes? or it says searching signal and no video and audio? any answers to this problem?
Hawaiian_time Gold Member Username: Hawaiian_time Kanaka freak... Post Number: 1049 Registered: Apr-06	Posted on Saturday, April 14, 2007 - 21:57 GMT Most likely it's your signal quality. Some channels come in stronger than others. For me, because I'm in Hawaii, I have a problem with some of the channels on 110. Sometimes realigning your dish helps.

« Previous Thread Next Thread »

Viewsat not working

Main Forums

Forum Help

Follow Us