Dishpro Question?
|
New member Username: Saru4uPost Number: 5 Registered: Oct-06 | Hi I have 2 dish's both dish 500. One pointing towards 110 & 119, second towards 61.5. My question is if I get a DP34 switch with a twin lnb for 110 & 119 and dual lnb for 61.5, would I be able to put a DP21 switch on the dual lnb since I can only lead 3 wires to the DP34 switch. If not can you tell me where to find a Dishpro Single Lnb? or what to do with the second wire from the dual lnb? |
|
Gold Member Username: NydasPost Number: 2232 Registered: Jun-06 | This diagram might be useful. For the second wire on 61.5 LNB, you can keep it disconnected, or put it on another switch for future. http://www.microyal.com/dp-34a-instal-istrn.jpg |
|
Silver Member Username: TapemanNew York, NY Post Number: 825 Registered: Oct-06 | - Twin LNB for 110/119 you only need one coax out - 61 one coax out - 1-DISEqC fswitch or all 3 Sats per one receiver List how many receivers you looking to get so you don't buy wrong parts as well as receiver brand. |
|
Silver Member Username: Cartier1Post Number: 343 Registered: Feb-07 | if u are using dp34 you need one wire from each. from 110 one wire from 119 one wire from 61.5 one wire all to dp34 . from dp34 you can run 4 cable to 4 receiver . noway you can run only one cable from the 110/119 lnb's period. ( only if u run stright cable from the lnb to the receiver or u use sw21 switch . ) but if u are using any other switch you have to run both cable from 119side and from 110 sides. |
|
Gold Member Username: PrfrmnjPost Number: 2503 Registered: Oct-05 | Joe - Nalin gave you the best graphics based on the setup you describe, so I'm not going to go into description, but you cannot use a DISEcQ switch unless you are running Single DishPro LNB's one for Each 110 & 119. So look at the diagram Nalin posted in that link. That's what you need to do. Oh, Cartier is right, you have to run both cables from the Twin LNB into inputs 1 & 2 of the DP34 switch. |
|
Gold Member Username: NydasPost Number: 2241 Registered: Jun-06 | The URL I posted is by the manuafacturers of the DP34A device. It should work as portrayed. |
|
Silver Member Username: TapemanNew York, NY Post Number: 832 Registered: Oct-06 | Joe was saying "if i get" Also I was refering to DISEqC switch as a simple option Didn't mention anything about receiver brand or how many. If he doesn't have dp34 yet chances were he was given wrong advice But it all depends on how many receiver he wants  |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics