hi guys,please i need help the keys for bev on post are 16 numbers but on (nagra 0901) there is the space juste for 8 numbers, what to do in this time? which kees i have to enter?...all the 16 numbers of key00? all the 16 numbers of key01? or 8 numbers of key00 and 8 numbers of key01? thanks
May be it's a stupid question ,but I have trouble with my dg7000,i have the latest bin ,and every time i enter keys it doesnt work...that why i want to know if i enter the kees right way.
Help!!! What are the new keys, i put in the Key O1 that's posted and nothing happened? I put them in the first 2 slots, did i put them in the wrong spot?
Nalyn Lyda NOOOOOOOOOO have not download bin 142... Really I was NOT AWARE about the 142 bin.... I am still on BIN 141 date 20-12-2006...... HO GODDDDDDDD MAY BE THATS WHY I AM HAVING FREEZING IMAGES OFTENLYYYYYYYY........ HOOOO PLEASEEEEEE GIVE ME THE BIN 142.. PLEASE..... THANK YOU INDEED NALYN.. U R GREAT
289T, 290T and 292T compared. All of these BINs work with Pansat 2500 and clones and with Fortec Ultra. 289T and 292T work with BEV and DN satellites. The 290T comes in two versions - DN_290T and BEV 290T. 289T does NOT autoroll. 290T and 292T autoroll most of the time. Autoroll function is better on DN. The 292T will autoroll even if the autoroll is off. All three give some glitches, such as auto reboot and 'scramble channel' message. These problems are much less if you keep auto update and autoroll off. If you have the genuine Pansat you are likely to have more problems. You may attempt to solve it with the T version but I am unable to say whether it will reduce glitches. The big difference between 290T and 292T is that the International channels on 61.5W come in nicely with 292T. They were a big problem with the 290T. They are OK with 289T, but you have to do manual key entry. Of the three, the channel changing is slowest with 292T. If you change channels using the small screen with EPG display it will work better. I think you will see an improvement if you change from 289T or 290T to 292T. Keep the autoroll and auto TP off.
Hi There...... I'm trying to figure out how to play mp3's or view pictures on my Viewsat. If anyone here knows how it works, please let me now.... Thx in advanced guys.
Where can I find the bin for Kool-sat 8000. I am planning to buy Kool-sat 8000, thinking i can get HD. Is there any other receiver which is cheaper than Kool-stat, but still gves HD quality.
Melissa WHat did you delete? Did you delete the Satellite itself or the channels. If it is only the channels, then do a blind scan. You will get all the channels
Raghu Raghav : C00LSAT 8000 seems to be the only one available in HD group. There is a spate of others expected in the next couple of months. http://www.dssrookie.com has a good section of files and forum. I am waiting for a HD from Viewsat/Sonicview stable simply because of its pedigree. I would think that HD from Pansat might also be a good one.
I have Pansat 2700 original with 295 bin. It was working perfect few days ago but now when I turn the power off using the remote and try to turn it on after few hours, it won't work untill I reset it from it's back switch. I heard there is new bin 297 is out but it seems that it doesn't work well. Please advise.
I'v got SAT-31, 61.5 orbit. Can someone tell me how or where I can see the WorldCup Cricket. I have loaded the 292T BIN. I have a pansat2500 clone. I also don't get Zee and other Indian chan. I get the Indian news channels however. Appriciate your help
Thanks Albino, How do I get 457/471. When I do a blind scan I get SAT-31 and only 125 channels. Could you let me know. Thanks
I'v got SAT-31, 61.5 orbit. Can someone tell me how or where I can see the WorldCup Cricket. I have loaded the 292T BIN. I have a pansat2500 clone. I also don't get Zee and other Indian chan. I get the Indian news channels however. Appriciate your help
Hi all, I am facing new problem now with my Pansat 2700. As I said earlier, I tried to load new boot file using new loader but nothing worked. Finally I loaded boot file 2700A_050217_100_api(N)_1 and 297 bin. I had to scan from the beginning and when I reset the receiver (using the switch from the back) everything wipped out and came back to the menu with language and english. I tried this few times but when I reset the receiver, it goes back to factory set up without any warning. Kindly advise. Many thanks in advance.
I just upgraded to B-80 boot and flashed box with 316t bin. I am not gettign any picture, just 'scrambled or bad channel'. I also tried using 315, 315t and 316 bins. Any suggestions?
Help me please.. Cools*t 5000 Most of my Satellite Setting are pointing to UNKNOWN NETWORK. I tried to change the LNB Freq. but still UNKNOWN NETWORK.. Long time ago it was pointing to Echostar 121 WEST} Since 2 weeks I lost Zee TV , Zee Cine and B4U TODAY I have lost all my East Indian channels. .. Its all because of the Unknown network.. and its not giving good level & quality.. its below 62%}. PLEASE HELP TO SOLVE. THANKS
Hi Albino, Need your help, I need to enter the BXVU key and I have key but I do not know what to put in 1st Five digits and 3 digits after that. Many thanks in advance Raj
Raj ji.. u r with BELL EXPRESS VU. how come u dont have the keys ???... should they not give you this?? If i am not mistaking you pay for these keys nah ???
A friend of mine has captivework 600s and has the dish pointing to 61.5 but gets 'Scrambles channel" the signal is 70, strength is 45. Can someone please help identify what may be the problem
Guys I'm not getting the cricket match WI vs Pak on channel 471, it says 'Scrambled or bad channel". Any suggestions will be great. I have pansat2500, bin 292t.
PLEASE GIVE ME FACTORY BIN, LOADER AND ALSO PROGRAMM FOR 61.5. 82, 91 AND 110 TO SETUP PR0GRAAM PLEASE............................SEN D ME.....................................
Regarding Pansat 2700A, I downloaded new boot file(B75) and api file dated March 11. I did everything to scan and get the channels but no luck. It just won't move over 0%. Please advise. Thanks in advance.
NEHA PATEL Me too I have cools*t 5000 You can register yourself also in this forum then you will have the BIN and the KEYS software Its very helphull there... Here also ISSSS Helpful.. but for the BIN 142 please go and have it there on the forum
http://www.dssrookie.com/forums register - then go to discussion forum.. look for cools*t then read and also ask your questions. OK
u will see the Bin in the forum... here I am not able to paste n copy.. dont know why.. but if you go and register there.. you will be able to save it on your PC and then load on your receiver...
Hi Guys.Is it possible to connect 2 digital receivers using the 2 separate exits of the LNBs with 2 separate Switchs? The reason I ask is because I'm trying to do that but the signals on the receivers are interfering with each other.Could that be from default LNB or that's the wrong thing to do?
Alexandra Lobo: It is possible, but post full information on dish type, LNB types, etc. As an experinment, connect one output only and see what you are getting, then the other output only and see what you get. Some LNBs have the same output for two receivers and others have two different outputs.
Nalin Nyda, I have one dish pointed at 110 ,one pointed at 61.5 and third for BEV. All have standard LNBs. What I did was, I connected one of each to the first swicth and to the first receiver and works fine, but when I did the same to connect the second this happen: If I was watching a channel on the 61.5 on one receiver and a channel of the 110 on the other, I would lose the signal of the 110 ,meanning that they ad to be both on the same satelite signal.What am I doing wrong?
Alexandra - Each output on your LNB's operate on different voltages. The left side is 18v and the right side 13v. You need to make sure you connect one receiver to all 18v outputs and the other on the 13v outputs to avoid that problem.
Regarding Pansat 2700A, I downloaded new boot file(B75) and api file dated March 11. Quality and signal are excellent but when I try to scan to get the channels it just won't move over 0%. I have 61.5, 110 & 119. Please advise. Thanks in advance.
Question on AMC16: Answer from Nalin in January Raghu Raghav: If you are getting a lot of Indian channels on Echo 7 (119W), you are probably getting them from AMC 16 (118.8W). This is a new Bird since about May, 2006 and carries many of the channels that were available from Intelsat 5. They include Doordarshan, NDTV, Bengali, Marathi, etc. These are the true free channels in India and there are similar ones from other Middle East and Eastern countries. The ones that come on Echo 9 (121 W) or Echo 3 (61.5) are what in India would be called paid viewing - the big ones being the Zee and Sony networks. The signal from 118.8W as obtained on a Linear LNB is weak, and the signal is much better with a circular LNB. Some of the latest DN dishes might be equipped with a LNB capable of both these satellites (plus the Echo 8.1 at 110W). I and many others in this forum would be very interested in finding out the LNB you have and confirmation or otherwise of my statement regarding AMC 16. You can look at the listings at www.lyngsat*com
Nalin, how can i check whether i am connected to 118.8 I am not getting much info from lyngsat. Or is there a way to manually add and blind scan the same.
keys anyyyooone?
it worked by the way where do u guys get the keys from?
