Cambodian channels???

 

Bronze Member
Username: Hemanjoyman

Post Number: 23
Registered: Jul-04
Is anybody here getting any Cambodian channels??? If so, what satellite are you pointed at to receive them???
 

Silver Member
Username: Bones714

Somewhere fi...

Post Number: 315
Registered: Mar-05
Cambodia t.v moved to globecast. http://www.lyngsat,com/thai5.html
replace the, to .
Hey, let me ask you this. Is Cambodia same as Thai?
 

Bronze Member
Username: Hemanjoyman

Post Number: 24
Registered: Jul-04
No, it's not the same, but what sat are those Thai channels on anyway???
 

Bronze Member
Username: Hemanjoyman

Post Number: 25
Registered: Jul-04
Were the Thai and Cambodian channels on the same sat, is that why you asked if they are the same???
 

Silver Member
Username: Bones714

Somewhere fi...

Post Number: 316
Registered: Mar-05
no, the thai channel is on 97w. My mom watches VTV4 the vietnamese channel on 97, i was going through the channles and have seen a few thai and laos channels
 

Bronze Member
Username: Hemanjoyman

Post Number: 27
Registered: Jul-04
Ok, thank for all your help. One more question for you....do you happen to know if it takes a specific dish and LNB to get 97W or can I use a DN Dish and Dish Pro LNB???

What are you using to get that satellite???
 

Silver Member
Username: Bones714

Somewhere fi...

Post Number: 318
Registered: Mar-05
I'm using a SonicView 1000 receiver,40" Fortec Star dish with a linear Lnb. Your gonna need a bigger dish to catch these programs. At least a 33", I had a 33" but upgraded to a 40" dish to get more quality.

I'm located in So. Cal. Before I was getting 30-40% quality and was getting a lot of pixelation so I reading a few post from a site. They told me if I'd get a 40" dish I'll get more quality. I did just that, also replaced my Lnb now I'm getting about 60 something % quality.

Here's a helpful link, you can also get equipment here for a reasonable price

http://www.sadoun.net/

This forum mostly talks about DN or BEV.
 

Bronze Member
Username: Hemanjoyman

Post Number: 28
Registered: Jul-04
All right thanks, I will look into it.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us