Bronze Member
Username: Senators Post Number: 89 Registered: May-06
Posted on
Tuesday, February 27, 2007 - 01:42 GMT i am point 110 adn when i do a scan i only get 150 channles. should i be getting more channels and what scan method i be using i am using the latest bin
Gold Member
Username: Prfrmnj Post Number: 2179 Registered: Oct-05
Posted on
Tuesday, February 27, 2007 - 02:40 GMT Recheck your antena alignment. If it is not fined tuned you will not receive all channels available.
Bronze Member
Username: Senators Post Number: 90 Registered: May-06
Posted on
Tuesday, February 27, 2007 - 04:09 GMT should i be using the latest sat files ???
Bronze Member
Username: Thunder_lightning Post Number: 25 Registered: Feb-07
Posted on
Tuesday, February 27, 2007 - 10:07 GMT SenatorS yeah you should using the lastest bin files.but what bin are you using right now??
Silver Member
Username: Crazy_greek Post Number: 721 Registered: Jul-06
Posted on
Tuesday, February 27, 2007 - 12:28 GMT Hey Senator On EchoStar 8/10 @ 110.oW you should be getting about (380) Channels. First adjust your Dish, then if you need to, change the Bin file
Bronze Member
Username: Senators Post Number: 91 Registered: May-06
Posted on
Tuesday, February 27, 2007 - 16:28 GMT i am using the latest bin but totalfta user told me to use the latest .sat file so i might give that a try my signal and qulity at 80 percent
Silver Member
Username: Crazy_greek Post Number: 726 Registered: Jul-06
Posted on
Tuesday, February 27, 2007 - 17:03 GMT Try this. Go to Antenna Setup. Scroll to TP scan, Press OK Now on to Echo 8/10/Ku Press OK Start with TP 1, Now scroll to each TP and watch your Quality Signal If you are receiving a Quality Signal of 70% or better on most of your TPs you are OK, just put in the file. If not, you will need to align your Dish.
Bronze Member
Username: Senators Post Number: 93 Registered: May-06
Posted on
Tuesday, February 27, 2007 - 17:20 GMT thx for u help man