Sat 129,problems
|
New member Username: FattayPost Number: 3 Registered: Jan-07 | Pansat 2700a,Dish 1000,DPP LNBs. Paired with DN 303,Have all reception on Dn receiver,including my locals. Pansat 2700a(8.6/ku,dpro/11250,DISEqc #2)(7/ku,dpro/11250,DISEqC #1) (T-7/ku,standard/10750,DISEqC #3) Have 8.6ku,7ku,and only partial reception(13channels)for T7ku. Done blind scan on T7ku, I have several Hor/Ver transponders, but still lacking local channels that DN receiver is providing.Is it a LnB Freq thing? During blind scan,channels only total 13, and % only gets to 30 and just sets there.It act like it is just down loading half,(Hor) of the Transponders. THanX to all that help, and let me say, this is one entertaining forum. |
|
Silver Member Username: TapemanPost Number: 511 Registered: Oct-06 | Compatibilty with DPP LNB and Receiver PanSat You may not get all local channels depending on where you live Stay away from blindscan, if you can get away by doing just chan scan most TP are preseted in many recivers |
|
New member Username: FattayPost Number: 4 Registered: Jan-07 | Question,why can one produce during set-up,(locals), and the other (Pansat) not give the same results? (I still have to try chan scan) ThanX |
|
Silver Member Username: TapemanPost Number: 513 Registered: Oct-06 | Simple Are they both in same town? Same BIN and RCVR, LNB, dish Also I'm guessing the new 118.75 FSS is causing some blockage in performing blind scan causing freezing. I repeat just guessing due to unrecognized TP frequencies by standard circular LNBs. |
|
Silver Member Username: Crazy_greekPost Number: 574 Registered: Jul-06 |  Het Yegerson T 7 is now called Galaxy 27 it carries very few channels which requires Linear LNB Local Freq.10,750.EchoStar 5 is also on this Bird at 129.oW. On Antenna Setup you will need to set LNB Local Freq. at 11,250 and a Circular LNB. |
|
New member Username: FattayPost Number: 5 Registered: Jan-07 | With this DDP setup, the DN receiver powers the lnbs, and receives all the locals I'm looking for. The Pansat will not pick up thease locals, and of course is hooked up to the same 1000 dish/lnbs. Will I have to rename Sat-129 or change freq in the Pansat for channels? Is the 303 software package compensateing for this rename/freq change? I mean, there setting beside each other, hooked to the same dish, one (303) is giving me the locals, and the other (pansat) will not. I know I'm a pain,and I thank Everyone For Helping |
|
Silver Member Username: Crazy_greekPost Number: 578 Registered: Jul-06 | You will have to add this satellite. (Echo 5/Ku) Now pull up www.lyn gsat.com drop down to EchoStar 5 at 129.oW. and enter all the TPs that are there, to your receiver. |
|
Gold Member Username: SatscannerBeaversbush, Sportsmans P... Great White ... Post Number: 1023 Registered: Nov-06 | I test 129w on pansat 2700 and ultra on same dishes with dual lnb's.The ultra catches more channels than the pansat on all the sats I scan.Think it has something to do with the mapping on the bins or memory capability's on the receivers. |
|
New member Username: FattayPost Number: 6 Registered: Jan-07 | I found all the TPs, can you direct me to info or help on how to load them ,and how to rename Sat-129. Do you delete Sat-129 and put it in it's place or create a new Sat-Echo 5/Ku? Thanx again. |
|
Gold Member Username: SatscannerBeaversbush, Sportsmans P... Great White ... Post Number: 1029 Registered: Nov-06 | On the 2700 sat 129w is listed as telestar7@129w.It's aready on the sat list,set your lnb type standard ,freq:11250,your diseq setting and scan.You can also rename another sat,but is not required,or change the name of any sat you desire. |
|
Silver Member Username: Crazy_greekPost Number: 589 Registered: Jul-06 | Hey Yegerson At 129.oW there are two (2) Birds. EchoStar 5 Freq.11,250 Circular Polarization. Galaxy 27 Freq.10,750.Linear Pol. Just add EchoStar 5 if is not on your receiver, and the TPs. Rename T-7 to Galaxy 27/Ku. BTW most of these TPs on EchoStar 5 are in High Definition.You will still be able to Scan in about 30 Channels. Antenna Setup Edit TP/Satellite Press OK At the bottom of the Satellite list you will see the word NEW Press OK By using the numeric keys enter satellite name. Echo 5/Ku The rest is easy, just follow your user manual or come back here.LOL |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics