Pansat bin 295

 

Bronze Member
Username: Togirl

Post Number: 25
Registered: Sep-06
I downloaded bin 295 for pansat 2700 from dsscommunity.c*m.

i've done a blind scan for echo 3 and echo7 but still get "bad or scrambled channel"
do i need to put in new keys ?

PLEASE HELP
 

Gold Member
Username: Prfrmnj

Post Number: 1896
Registered: Oct-05
I would to make sure
 

Silver Member
Username: Hawaiian_time

Kanaka freak...

Post Number: 813
Registered: Apr-06
Is your autoroll on? Try putting in your keys manually.
 

Gold Member
Username: Prfrmnj

Post Number: 1897
Registered: Oct-05
By the way if you turn your autoroll off and load a new bin, it may still be off.
 

New member
Username: Xantius

Post Number: 1
Registered: Feb-07
do u have the pansat 2700a? i just wanna know if the X-87BL_070201_295_api.bin is safe with the 2700a because thats the receiver i have.

thanks
 

Silver Member
Username: Xmongra

Post Number: 371
Registered: Feb-06
PRFRMNJ I have downloaded the bin 289 in my Pansat 2700(it is working) and automatically turn on autoroll, I had to turn them off again.

Toronto Girl, make sure, check again and put the keys manually after.
 

Bronze Member
Username: Jalaj69

Norcross , Georgia USA

Post Number: 68
Registered: Sep-06
can any one tell me if this bin 295 safe for 27001 clone!!!! pleeeeez
 

Gold Member
Username: Nydas

Post Number: 1677
Registered: Jun-06
Jalal: The 295 is not clone safe.
For the 2700 CLONE, use
VorteX_87VX_070201_2905.zip
It has just been released.
Make sure you use the Vortex loader.
 

Silver Member
Username: Hawaiian_time

Kanaka freak...

Post Number: 816
Registered: Apr-06
All bins for clones are followed by a t. like 295t
 

Gold Member
Username: Nydas

Post Number: 1679
Registered: Jun-06
There is no 295t. The t suffix is not tru for 2700A clone BINs. It only applies to 2500 clone BINs.
The one I have posted is the correct clone BIN for Pansat 2700A clone as of now.
VorteX_87VX_070201_2905.zip
 

New member
Username: Eric_r

Post Number: 2
Registered: Aug-06
Where do you find the VorteX_87VX_070201_2905.zip and the Vortex Loader? I have looked on a number of Fta sites. I am trying to udate a Vortex 7700 (pansat 2700 clone). Thank you for your help.
 

Gold Member
Username: Nydas

Post Number: 1701
Registered: Jun-06
Pansat 2700A clone BINs are usually posted at
http://www.dssrookie.com
http://www.dsstester*com
There is a Mark version and a Vortex version.
 

Gold Member
Username: Lklives

Post Number: 7475
Registered: Jan-06
They are posted at www.dsscommunity.c*om/forums in the CLONES section under the Vortex thread!

Only way nalin knows about any of this stuff is from my previous postings here!/... I mentioned these files yesterday and posted this info..

BTW...a Vortex 7700 is NOT a clone of the 2700!...obviously U know NOTHING of your own receiver!...7700 is a Pansat 2500 clone!..and there is NO 2500 clone bin released yet!...but will be today, I'm sure..dsscomunity and all REPUTABLE sites will have it..

hey nalin, theres some more info for ya...now copy and paste it or tell others and look like a hero, U lesbo retard!
 

Gold Member
Username: Lklives

Post Number: 7476
Registered: Jan-06
Direct link to Vortex (aka Pansat Clone) bins and loaders..

[link removed]
 

New member
Username: Enzoho

Post Number: 7
Registered: Jan-07
I using pansat 2700-N2.Before i download 295v1 Tivo file.Is working fine.
 

Silver Member
Username: Vndpatel

Post Number: 124
Registered: Mar-06
ya you have to load the new bin check the keys and then let it role after a few minutes the picture will be back.
 

Bronze Member
Username: Togirl

Post Number: 26
Registered: Sep-06
THANKS everyone. I turned autoroll on, and entered new keys and i had picture.

Another question though :-)

I did a blind scan and satellite scan but only get these PPV channels : 502, 505, 509 and 533.

Is there any way to get the rest ? (503, 504, 506, 507, 508, 510, 511, 512, etc)

THANKS AGAIN FOR THE HELP.
 

Bronze Member
Username: Togirl

Post Number: 27
Registered: Sep-06
bump..

pls help !
thanks
 

Silver Member
Username: Hawaiian_time

Kanaka freak...

Post Number: 817
Registered: Apr-06
girl, need echo 6.8, 110 has most of the ppvs.
 

Bronze Member
Username: Jalaj69

Norcross , Georgia USA

Post Number: 75
Registered: Sep-06
hey guys i want and down loaded the VORTEX loader and the VorteX_87VX_070201_2905 bin file but after i trans. into the box and my parental control went a way and i even tried to blind scan and all i end up getting is SCRAM and BAD channel.. so i don't know what i did wrong....some one please help.......
 

Bronze Member
Username: Togirl

Post Number: 28
Registered: Sep-06
ok thanks. but isnt there a TP scan that I can do.....that will get me the PPV's ?
 

Bronze Member
Username: Togirl

Post Number: 29
Registered: Sep-06
i ask because i've always had the same satellite,, and used to get channel 519, for instance but now don't.

so is there a tp scan etc that i can do ?
thanks !
 

Silver Member
Username: Hanz

Post Number: 235
Registered: Oct-06
Toronto Girl, go to Menu, Installation, TP scan, select 110, go down the list and select transponder 8(12326) and scan. This transponder carries PPV channels 503, 506, 507, 510, 516, 521, 523, 524.
After that, select transponder 14(12414) and scan. This transponder carries PPV channels 520, 525, 526, 527, 528, 529, 530, 532.
After that, select transponder 16(12443) and scan. This transponder carries PPV channels 511, 512, 513, 515.
Transponder 2(12239) carries PPV channel 517. Transponder 10(12355) carries PPV channel 519. Scan all of these as I said. Then let us know.
 

Bronze Member
Username: Togirl

Post Number: 30
Registered: Sep-06
Thanks Ranjeet.

I did as you told but no luck. In each TP I got 0 programs found :-(

I find this very strange, coz I know for a fact I used to get 519 before !
oh well...thanks for your help...let me know if u can think of anything else :-)
 

Silver Member
Username: Hanz

Post Number: 248
Registered: Oct-06
Hmmm, strange. I figure it can only be a wiring issue in this case or the dish is out of range. Did you get bad weather lately? Connections possibly came loose? What's the signal strength?
 

Bronze Member
Username: Togirl

Post Number: 31
Registered: Sep-06
no bad weather really. i checked all connections and they were ok. signal strength for echo 8.6 is 0..i searched all TPs (21 of them). none had any signal. so i'm guessing that''s why .. ?
thanks !
 

Silver Member
Username: Crazy_greek

Post Number: 572
Registered: Jul-06

All the PPVs that you are missing
are at EchoStar 8/10 at 110.oW.
Channels 503 thru 532.
Before you Scan these TPs, you will
have to point your Dish to EchoStar 8/10
at 110.oW
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us