Missing all indian international channels
|
New member Username: KachPost Number: 1 Registered: Jan-07 | i just uploaded the new 289t bin and scnned all channels and now all my indian channels are missing...smoeone help plsssssss. |
|
Silver Member Username: RyersonresurrectedCANADA Charlatan... Post Number: 684 Registered: Sep-06 |  |
|
Silver Member Username: TapemanPost Number: 434 Registered: Oct-06 | Man what is going on with international channels? 289T if compatible with your receiver may have few bugs. Try to turn off receiver from back switch, wait about 1 minute then turn it back on. It should fix the problem (don't change channels) If it happens again it probably bin PGM got some bugs. The genius people that write memory locations put wrong address. If they work for me I would of fired them long time ago |
|
New member Username: KachPost Number: 3 Registered: Jan-07 | i turned it off and on after 1 minute...still no international channels... |
|
Silver Member Username: TapemanPost Number: 437 Registered: Oct-06 | - Turn off auto TP (you only need this on when changing setup) - Make sure auto roll on - tune to a channel you want to receive - Turn off receiver for 1 minute - Turn it back on and leave it to roll (5 to 20 minutes) |
|
Gold Member Username: NydasPost Number: 1531 Registered: Jun-06 | Jamla: You may have to reset your list of satellites you are scanning, connect properly with DiseqC switch and do a blind scan |
|
Silver Member Username: Crazy_greekPost Number: 513 Registered: Jul-06 |  Hey jamia You will find Indian channels on these Satellites, EchoStar 61.5,118,121 and 148. Intelsat Americas 5 @ 97.oW. Nimiq 2 @ 82.oW. Now could you tell me, what Bird are you on, with these missing channels? Maybe I could help. |
|
Bronze Member Username: NijhersPost Number: 22 Registered: Jun-06 | hi guys i have the same problem i did same as describes but still some channels are missing and some are comming i have ariza 700 on 148n |
|
Silver Member Username: Crazy_greekPost Number: 514 Registered: Jul-06 | harmeat Check each of these TPs for Quality Signal. Freq. 12224 (Pol.V) SR 20,000 (tp1). Freq. 12370 (Pol.V) SR 20,000 (11). Freq. 12574 (Pol.V) SR 20,000 (tp25). You will find your Indian channels on these TPs. If the Quality Signal is above 50%, just do a TP Scan for each TP. |
|
Gold Member Username: NydasPost Number: 1544 Registered: Jun-06 | There are two different issues here. Jamla has a 289T Bin and is missing Indian channels. Jamla, you should be getting all the Indina channels, particularly SET SETMX, ZCINE, ZEETV, B4U. Harmeet has Ariza 700, so he would be missing the above channels but should have at least ZGUJ, SAMAY, HT, etc. There is no new BIN out for Ariza 700, equivalent to the 289T. |
|
Bronze Member Username: Gigolo72Post Number: 61 Registered: Jun-06 | I am also missing some of the international channels, I have viewsat Platinum, do i have to load a new bin ?? cause blind scan didn't fix the problem!! Anyone help is greatly appreciated. |
|
Silver Member Username: HanzPost Number: 228 Registered: Oct-06 | Fred, a new bin is the only way to retrieve the international channels. Make sure you get the correct bin for your receiver. |
|
New member Username: Charlie40Post Number: 2 Registered: Jun-06 | is there a fix for atmega to bring back indian channels I am getting some but not the main ones (ztv, sony, b4u, zcine etc)110 working good |
|
New member Username: KachPost Number: 4 Registered: Jan-07 | Kavin Reno: i scanned nimiq2 @ 82.oW and echostar 61.5 still no indian channels... (receiver pansat 2500a - bin 289t) |
|
New member Username: IsmailbawaPost Number: 10 Registered: May-06 | hi ppl i have this problem i been missing indian chanels for week now i have ariza xtream receiver if any one can help. help is gretely appreciated and even if u guys can not help i still would like to thank you for great work u guys have been doing so thanks again and i hope some one will be able to help me out (really want see indian channles plz help) |
|
Silver Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 792 Registered: Sep-06 | Ok I am not trying to be mean here but, if those few channels are so important just make it easy and get a Viewsat. |
|
New member Username: Charlie40Post Number: 3 Registered: Jun-06 | how reliable is viewsat extreme? I have heard good things about it and was thinking of getting it myself. I like to watch cricket mostly and indian channels would make the lady happy. currently I have atmega until 2 days ago all 110 channels were working also cricket on 457 but nothing now so I was wondering if viewsat extreme is consistant? |
|
Silver Member Username: Crazy_greekPost Number: 534 Registered: Jul-06 | jamla Go here, Post #361 https://www.ecoustics.com/electronics/forum/home-video/310797.html |
|
Bronze Member Username: NassaPost Number: 89 Registered: Jun-06 | My international channels on the viewsat xtreme r also not working? |
|
Silver Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 796 Registered: Sep-06 | nassa, |
|
Bronze Member Username: IsmailbawaPost Number: 11 Registered: May-06 | bro THE FTA TESTER is there any wahy i can see dam indian chanells on ariza xtreme plzzzzzzzz help and ya i no u would naver be mean bro, if u were mean person u would naver be here helping this many ppl. thanks |
|
Bronze Member Username: Sniper66Post Number: 40 Registered: Jun-06 | i am havin the same issue on pantec...i downloaded 289T bin...and i am getting no channels now..even after entering the right key...All channels are scrambled |
|
Gold Member Username: NydasPost Number: 1623 Registered: Jun-06 | sniper66 : The autoroll probably did not work. Set autoroll off for BEV and for DN. Do "Set default key". Then enter both Key 00 and Key 01 under Nagravision 2 and appropriate Provider ID - 0101 for DN, 0901 for Bev. Make sure you save. Then After exit, turn receiver off at the back and turn on after 30 secomnds. |
|
New member Username: NvsPost Number: 1 Registered: Feb-07 | Hi Nalin, I have Eagle Star receiver i believe its a clone of Panset. I have tried putting in the keys which are provided in other threads but they dont work. Can you please update me with the new key if possible. Also in my autoroll option i have all the options ON is that okey? thank you. |
|
Gold Member Username: NydasPost Number: 1656 Registered: Jun-06 | Ricky S: You need BIN 289T and then do manual entry of keys as stated in my post just above yours. Follow the instructions fully and it should come on. |
|
New member Username: Saad_sajjadPost Number: 1 Registered: Sep-06 | HI nalin does 289t work for fortec classic also? |
|
Gold Member Username: NydasPost Number: 1668 Registered: Jun-06 | 289T does not work on fortec classic |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics