Is there any ways to improve Quality of certain Frequencies

Jim Bronze Member Username: Book77 Post Number: 25 Registered: May-06	Posted on Thursday, January 25, 2007 - 13:48 GMT I have around 75 quality on 85 percent signal on most channels But there are certain channels ( channels in the 7000s) that I have 0% . (signal is weak)} Is there any way i can fine tune these channels to get a signal and picture. Thank you
Kavin Reno Silver Member Username: Crazy_greek Post Number: 484 Registered: Jul-06	Posted on Thursday, January 25, 2007 - 14:07 GMT Jim} Maybe these channels have nothing on them. What channels are you looking for? Try to align your Dish to improve the quality signal.What Birds are you now on?
Jim Bronze Member Username: Book77 Post Number: 28 Registered: May-06	Posted on Thursday, January 25, 2007 - 14:21 GMT I am on 110 and 119 . My signal is pretty good on some channels . It is only on some TP's
Kavin Reno Silver Member Username: Crazy_greek Post Number: 487 Registered: Jul-06	Posted on Thursday, January 25, 2007 - 14:48 GMT Hey Jim Give me the TPs numbers or the Channels so I can check them.
PRFRMNJ Gold Member Username: Prfrmnj Post Number: 1615 Registered: Oct-05	Posted on Thursday, January 25, 2007 - 14:52 GMT Jim - Not to repeat what Kevin just stated, but if they do indeed have channels on them, then your problem is antena alignment. There are a couple of ways to go about this. You can use the receiver itself to fine tune the alignment, but I find it easier when you use one of those cheap sat finders with the whistle and tone the sensitivity just low enough to where you can actually hear a difference as you ajust to maximize your alignment.
Nikk Mty Silver Member Username: Nikk Post Number: 992 Registered: Sep-06	Posted on Thursday, January 25, 2007 - 16:32 GMT You may also need to check the leveling of the dish base plate, that could make you loose between 5 to 10% of your signal...

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us