Viewsat extreme not working

cool goose New member Username: Coolgoose Post Number: 8 Registered: Jun-06	Posted on Wednesday, January 24, 2007 - 05:02 GMT I have a viewsat extreme and its been running on the latest bin for two days. My tv is blank today and all it shows is "on" in the display of the receiver. Should I load the bin again??
Jay Silver Member Username: Ke5aqn Shawnee, OK USA Post Number: 466 Registered: Sep-06	Posted on Wednesday, January 24, 2007 - 05:06 GMT make sure you have all setting correct, coax connected and so on after that make sure your key's are correct. then let us know
cool goose New member Username: Coolgoose Post Number: 9 Registered: Jun-06	Posted on Wednesday, January 24, 2007 - 05:23 GMT The tv is completely blank and the remote doesnt work. All it shows on the display is "on" where it used to show 00:00. Cannot see anything on tv so cant change keys
Jay Silver Member Username: Ke5aqn Shawnee, OK USA Post Number: 467 Registered: Sep-06	Posted on Wednesday, January 24, 2007 - 05:26 GMT did you reboot it? turn off the switch on the back wait a min or so then turn it back on....post the results
cool goose New member Username: Coolgoose Post Number: 10 Registered: Jun-06	Posted on Wednesday, January 24, 2007 - 05:27 GMT I tried that but the result is the same.
Mc Sunny Silver Member Username: Mc_sunny Post Number: 991 Registered: Feb-06	Posted on Wednesday, January 24, 2007 - 05:39 GMT Load The Virgen File..2051 bin And Then Load The Lates Bin for ur vs
Jay Silver Member Username: Ke5aqn Shawnee, OK USA Post Number: 469 Registered: Sep-06	Posted on Wednesday, January 24, 2007 - 05:40 GMT ok you will need to jtag it and start all over no big deal. Go ~~HERE~~ the home Viewsat forum. Their you will find a section just for that receiver and instructions on how to do that.
cool goose Bronze Member Username: Coolgoose Post Number: 11 Registered: Jun-06	Posted on Wednesday, January 24, 2007 - 05:41 GMT I tried loading the bin again and the result is the same.it just shows "on".This bin was working for two days.
Mc Sunny Silver Member Username: Mc_sunny Post Number: 992 Registered: Feb-06	Posted on Wednesday, January 24, 2007 - 05:44 GMT First load the factory bin..which is XTREME_v2051_factory_bin. Then load the latest bin Xtreme DBPSW-070117X
Jay Silver Member Username: Ke5aqn Shawnee, OK USA Post Number: 473 Registered: Sep-06	Posted on Wednesday, January 24, 2007 - 05:47 GMT I would also go the home forum and download the .bin again you may have a bad file
cool goose Bronze Member Username: Coolgoose Post Number: 12 Registered: Jun-06	Posted on Wednesday, January 24, 2007 - 06:16 GMT Can I load this factory bin (VS2000_NEWOSD_XTREME_v2061_factory_bin) from totalfta , I didnt find v2051. Or is there a latest factory bin which i can load
cool goose Bronze Member Username: Coolgoose Post Number: 13 Registered: Jun-06	Posted on Wednesday, January 24, 2007 - 06:44 GMT I loaded the factory bin (VS2000_NEWOSD_XTREME_v2061_factory_bin) and then loaded DBPSW-070117X. Now it says "noCH". What should I do now. please help
Grim Silver Member Username: Grimreeper Post Number: 284 Registered: Feb-06	Posted on Wednesday, January 24, 2007 - 12:31 GMT Do a channel scan let the keys roll and watch tv
Mc Sunny Silver Member Username: Mc_sunny Post Number: 993 Registered: Feb-06	Posted on Wednesday, January 24, 2007 - 15:16 GMT set up antenna setting....do F1 scan...wait for keys to roll and watch tv
PRFRMNJ Gold Member Username: Prfrmnj Post Number: 1582 Registered: Oct-05	Posted on Wednesday, January 24, 2007 - 16:50 GMT Mc - Not trying to contridict you, but wouldn't "F2" update the TP's. I've found that when loading/flashing the preset TP's are not always complete. But I'm not sure if it's just me, so let me know what you think... Peace!
cool goose Bronze Member Username: Coolgoose Post Number: 14 Registered: Jun-06	Posted on Wednesday, January 24, 2007 - 22:57 GMT Thanks everyone , I didnt know noCH means no channel. Once again I thank everyone who helped me in this thread
Jay Silver Member Username: Ke5aqn Shawnee, OK USA Post Number: 515 Registered: Sep-06	Posted on Wednesday, January 24, 2007 - 23:00 GMT glad we could help cool goose!

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us