ya it just takes one # off to make it not work.. Now with that vewsat after you get the key in right autoroll will do its job and keep it working....I got my viewsat about 5 weeks ago and put in the #'s once and its worked every day.
you have lost me you need to find a "how to" for your receiver. Mine is a platinum and it has no options on blind scanning......you just blind scan the sat you selected
If you follow this steps, your up and running in less than 5 min. - Instal you STB and connect all the cables - Turn the power ON from the back switch - Press Menu key - Select Installation and press OK - Select Antenna Setup and press OK - Select your Sat. - Here if you have a DISEqC switch enter the port #, Motor or Legacy SW - No LNB Type need to select (from new, you have only two selection Standard and Universal) The STB will select your LNB Automatic - Press Exit and select Yes for saving the settings - Your back to Antenna Setup screen - Here you have Three choises: - 1 Channel Scan - 2 Auto Scan - 3 Blind Scan - I try all, but the best its Auto Scan - Press OK - You are in the Auto Scan window and you see the Bird(Sat.) you selected and in the top of your screen are three options: - 1 Search option - 2 Network search - 3 Scan Start - You don't change nothing, go down and select Scan Start and press OK - You do this for all the Birds (Sat.) you have - Now its time to dowload you BIN - Insert the Memory Stick in your PC and transfer the bin in. Than insert in your STB and in the Main Menu select System information and press OK - Select Receiver Upgrade and press OK - Go down to the bottom of the window, select USB and press OK - A new window its open with some Corean files, years, etc. - In the bottom of the window its your bin select and press OK - VERRY IMPORTANT. DON'T TURN THE POWER OFF - After you load the bin, the STB will reboot automatic - Wait for Autoroll and wach TV - GOOD LUCK.
