New member Username: Curious10Post Number: 2 Registered: Jan-07 | After loading 290 bin, I did a factory default. I am unable to select parental controls now. It does not highlight so that it can be selected. Any suggestions? |
Silver Member Username: SatscannerBeaversbush, Sportsmans P... Great White ... Post Number: 773 Registered: Nov-06 | Reflash the bin. |
Bronze Member Username: DoreenakadjPost Number: 50 Registered: Dec-06 | scan for sats .. if you still cant use the parental controle start over and reset it back to factory settings first .. then put in the bin again rescan and see what you can do as far as controles go. |
New member Username: Curious10Post Number: 3 Registered: Jan-07 | Reflashed, no luck and no channels. |
Gold Member Username: LklivesPost Number: 7067 Registered: Jan-06 | U must do a scan!...U cannot have "parental controls" UNLESS U have scanned channels (or uploaded a channel list)into the receiver!...common sense...why would the receiver need parental controls, if there were NO channels input via a list or a scan first! |
New member Username: Curious10Post Number: 4 Registered: Jan-07 | I tried the scans, no channels. Where can I find a channel list to upload? |
Silver Member Username: Ars88P.I.M.P , Pakistani/In... Post Number: 296 Registered: Nov-06 | woah buddy...if u cant find any channels when u do a scan...no way u going to get any signal when u upload a channel list... first off i would highly recomend u check ur port/diseqc settings and make sure all is good...then if still nothing i really recomend u align ur dish (ur dish may not be aligned properly or 'unaligned' which is causing you to not catch any signal) if that doesn't work... let us know.... |
Silver Member Username: Ars88P.I.M.P , Pakistani/In... Post Number: 297 Registered: Nov-06 | good luck |
Silver Member Username: Crazy_greekPost Number: 399 Registered: Jul-06 | Hey Curious Iam curious, have you set your Longitude and Latitude? Also check your system information to see if BIN 290 was stored. LOL to you. |
Silver Member Username: Ke5aqnShawnee, OK USA Post Number: 238 Registered: Sep-06 | Curious, What you receiver, dish, switches etc. Whats the status now? Was it a working system before? Give me the info and we will get you going unless somethings bad wrong.. |
Gold Member Username: PrfrmnjPost Number: 1268 Registered: Oct-05 | Jay - Kevin: You guys got this under control. I'm going on vacation! LOL |
Silver Member Username: Crazy_greekPost Number: 403 Registered: Jul-06 | Hey PR What do you mean, you are going on vacation? I thought when a person retires he is on vacation. BTW If you like the truth, why was you working as a lawyer? They don't tell the truth.LOL |
New member Username: Curious10Post Number: 5 Registered: Jan-07 | I have a Pansat 2700A receiver, Dishnet 500 with dual LNB, and a Pansat Diseqc 4x1 switch. My system has been up and running for over a year. There was a bad rainstorm last week. At the time my satellite kept saying no signal as it does sometimes when it rains very hard. I loaded the 290 bin, did a factory reset, now I don't have a signal or any channels. I saw an older post that stated that it could be a bad Diseqc switch. I have ordered a new switch with the weather case. In the meantime is there anything else that could be causing the no signal error? |
Silver Member Username: Bones714SO.California Post Number: 189 Registered: Mar-05 | so your using a diseqc, i take it your aiming at 2 satellites. while your waiting for the new diseqc to arrive, i would try the setup without the old diseqc . even though your only going to aim at 1 satellite 4 now, if you pick up any channels than you'll know 4 sure your old diseqc gone bad. |
Silver Member Username: NikkPost Number: 862 Registered: Sep-06 | Curious...... Every time you do a factory reset, everything goes to default settings, what you have to do is: 1.- Do a physical inpection, check which inputs of your diseqc you are using for the sats. 2.- go to installation, then antenna setup, look for the echo 7 and echo 8, then configure each one based on how they are connected. 3.- Go to installation, then do a blindscan on each of the 2 sats you have, you must get the active TP's. 4.- At this point the parental control must give you the option of going to enter the latest keys. 5.- watch TV. |
Silver Member Username: NikkPost Number: 863 Registered: Sep-06 | Your problem is that you wiped out the whole configuration info for your sats...... |
Silver Member Username: Ke5aqnShawnee, OK USA Post Number: 294 Registered: Sep-06 | Look here I did screenshots of it for a user |
New member Username: Curious10Post Number: 7 Registered: Jan-07 | When I do a blind scan it says, O Transponder founded. I have not tried Kingfish's suggestion yet. My satellite is on top of my house. I wanted to wait until the Diseqc switch comes in before I make that trip. Since I am unsure of what the problem is, I wanted to continue to troubleshoot until that time. For Echo 7 I have the below settings: LNB Type - Standard LNB Local-Freq - 11250 DiSEqC - #1 Legacy SW - None Skew: -45 TP - (1) 12223 V 20.000 Positioner Setting - Disable Satellite Scan - All Echo 8 is the same except DiSEqC is set to #2. Level is 30%, Quality is 0. |
Silver Member Username: Ke5aqnShawnee, OK USA Post Number: 298 Registered: Sep-06 | I would say put the coax from the echo 7 into the receiver bypassing the switch and see what you get. let us know. |
Gold Member Username: NydasPost Number: 1237 Registered: Jun-06 | Curious: Right away I can say that your DiseqC setting of port 2 for Echo 8.1 is no good. Go through 1,2,3, and 4 if you have 4 to 1 switch and see where there is a signal. You may also go to TP2 and 3 to see the signal. You did not mention the signal level for port 1 setting of Echo 7. You should see a good signal on Echo 7 somewhere on Port 1 to 4 settings of your switch. Also don't bother with scan all. Do a blind scan after you have a reasonable DiseqC setting. One more thing. Did you your your time and zone settings? Yet one more thing. I would not use the 290 BIN but use the clone safe BIN. Pansat-C 2700 290v1 Tivo This is the 290v1 Clone Safe Beta |
Gold Member Username: PrfrmnjPost Number: 1318 Registered: Oct-05 | Curious - I would add that prior to doing anyhing follow kinfish's sugestion to see if your antenas are still aligned. After you have done that then follow the instructions above that Nalin has posted. NOTE OF CAUTION - Do not remove any cables until you have unplugged your STB from the wall. |
New member Username: Curious10Post Number: 8 Registered: Jan-07 | Nalin, I am guessing that when you say go through 1 - 4 to check for a signal, you are referring to in the antenna set up screen. I did go through 1 - 4, each time changing the TP to 1 - 3. The Echo 7 signal is the same as Echo 8, 30% with 0% quality. I reflash with the 290v1 bin file. I am not sure what you mean by the time and zone settings. My settings currently show: Time Setting - 12:10 PM (It is currently 8:35 pm EST) Time Zone - Mountain(GMT - 7:00) (should be EST) Current Time - 12:17 pm (should be 8:45) Timer - OFF The rest does not appear to be pertinent and can not be selected. Current Time settings are: Time Set Mode - TDT Auto Summer Time - OFF The Year, Month, Date and Time are unselectable. It shows 2006, 01, 01 PRFRMNJ - It is dark here. I will try Kingfish's technique tomorrow if it doesn't rain. Thanks to everyone for your responses. |
Silver Member Username: Ke5aqnShawnee, OK USA Post Number: 307 Registered: Sep-06 | I still think you need to try to connect the LNB strait into the receiver with no switch. That way you will know if its a switch problem or a antenna problem. Did you ever try that? |
New member Username: Curious10Post Number: 9 Registered: Jan-07 | I just wanted to let you all know that my problem was the DiSeQc switch. When I took it off one of the connections had water coming out of it. I replaced it with a 4x1 switch that came with the weather case. Thanks for your assistance. |
Gold Member Username: NydasPost Number: 1253 Registered: Jun-06 | Curious: For the past two days I was curious to find out what happened to the curious problem posted by Curious. I am glad to know that the curious problem posted by Curious has been curiously solved by Curious, so there is no need for me to be curious any more. |
Silver Member Username: Crazy_greekPost Number: 431 Registered: Jul-06 | Hey Nalin This is exactly what I was talking about, when I posted that some people here talk from both sides of their mouth. I will go no farther, I think you get my drift. Have a nice day.} |
Gold Member Username: NydasPost Number: 1254 Registered: Jun-06 | My post about "curious" was meant to be an exercise in the use of the word "curious" and hopefully funny at nobody's expense. |
Bronze Member Username: DoreenakadjPost Number: 86 Registered: Dec-06 | I understood it and thought it was funny Nalin, |
Silver Member Username: Crazy_greekPost Number: 432 Registered: Jul-06 | Hey Nalin That was funny,but King's birthday posted on Monday, was stupid, not funny. |
Silver Member Username: NikkPost Number: 884 Registered: Sep-06 | The good thing here is that finally we got someone who learned a little bit more about self solving problems with his/her unit.....if we finally make someone to be curious enough to play and learn from what they have then we were succesful...... Nalin...I also got your point about that phrase, it was a really good word game... |
Gold Member Username: NydasPost Number: 1255 Registered: Jun-06 | Thanks |
Silver Member Username: Crazy_greekPost Number: 434 Registered: Jul-06 | I don't think you two clows could teach anything here. Nikk,when in the hell did you pop up from? You two must be hanging out in the same faget bar. |
Silver Member Username: NikkPost Number: 899 Registered: Sep-06 | kavin.... I never said I teach, you must do some work around reading.....look carefully....and I don't need your opinion to do things, just think whatever you want, I don't care about your opinion about me, you are not important to me to make me feel in anyway just by reading what is being ejected from your brain..... Keep helping here, you are doing it kind of good and there's enough space for all of us, so keep in your space, I will still be moving on mine... This is the first and last answer to a post coming from you...... Bye Bye... |
Gold Member Username: NydasPost Number: 1269 Registered: Jun-06 | Kevin: You asked me somewhere, why I don't post in many threads. Here is my poetic post based on an old song 'Kiss of Fire' I touch a thread, and all at once the sparks go flying; That devil God-man who knows so well the art of lying. And though I see the danger still the posts go higher I know I mustn't surrender to the flames of fire. Just like a torch, he sets the soul of many a burning, His quest of superiority has no returning, And though it burns him and it turns him into insanity, His whole world crashes Without a post of profanity. |
Silver Member Username: Crazy_greekPost Number: 435 Registered: Jul-06 | Hey Nalin I know that song ,so don't bid around the bush. What are you trying to say? Be a man spit it out. |
Gold Member Username: LklivesPost Number: 7165 Registered: Jan-06 | If nalins a man, he's the most feminine man on the planet!...I say she's a busy body chick who would gag a maggot!! |
Gold Member Username: NydasPost Number: 1271 Registered: Jun-06 | Kevin: I am not beating around the bush. It certainly does not apply to you. The song as posted applies to only one person in Ecoustics forum and he has just spoken! Here is another one. "Full many a maniac lurk unseen, And through their weight with phantom air" modified from "An ellgy in the Country Churchyard", by Thomas Gray. |
Silver Member Username: Crazy_greekPost Number: 436 Registered: Jul-06 | Hey Nikk I was not talking to you. If you stayed in your space in the first place,this never happen. You came up with some bull sht, that is hard to understand. Are you also from India? If you are, you know what the Greeks did to India, so don't push your luck. put that in your pipe and smoke it.F/H |
Silver Member Username: Crazy_greekPost Number: 437 Registered: Jul-06 | Hell, I have been a fool again. LK you mean that I was talking to a WOMAN and not to a man. What a dam SS Greek. |