If you want the original go to pansatusa.com, they have one right there, otherwise go to al7bar.com, register and you will find any kind of tools and information there...
Poser is a spammer and a scammer...as well as a newbie..stay away from his PLAYGROUND site...its not Established or considered reputable..who knows what will happen to U when use unknown sites...would U buy a new, NEVER established, vehicle!...I sure wouldn't..
Arni - You've got two problems. Wrong loader and wrong bin.
290 is the X-87BL_070104_290_api is the bin for the 2700 and the loader you need for this is the X-BL_Loader_v27[1].01
You can go to [link removed] register and get both of them there. You can also go to LK's "List of Reputable DSS Sites" and pick any site and feel comfortable that you will not be downloading garbage.
If you need a uploader for your Pansat receiver, download Blacklist 1.4. This uploader will work for all Pansat receivers and it works good. Get this uploader from www.dssworld.co.nr.
BL 1.4 will not work properly with the 2700. You need the loader posted above in my post #1159. That post has answered all questions. Go to any site listed under LK's thread "List Reputable DSS Sites" and you'll find all you need there. No scams, just good ole fashion DSS help.
Kevin - I don't use the post number to boost myself. As Nikk said, I use it to point people where to read. Rather then telling them to read my previous post (which then they would read all my posts in the thread) I point them to the post number directly related. The posts numbers are going to be there anyway. Just making it easier on them. And I really don't care how they judge me. Just care about them getting the right answer.
Does the latest pin for pansat 2700 (bin 290) have pay per view ? currently i have bin 288 dated 24th Nov 2006 and i do not get some ppv's. (503, 504, etc). thanks
but i've already done a blind scan. the channels (503, 504, 505 etc) do not even appear on the channel list. ?? it jumps straight from 502 to 519 and then to 533. thanks
You need to verify your configurations, but most importantly you may just want to do a factory reset, reconfigure your system and then do blind scan. Just make sure you write down your settings before you do a factory reset.
Having said that, I think your problem is antena alignment. You may want to verify that before you do the above.
}