Viewsat chip (LK)

 

New member
Username: Jjfox23

Toronto, On Canada

Post Number: 2
Registered: Mar-06
i have a VS2000 pltm.
i uploaded a bin that does not allow me to see the numbers on the front and also does not allow me to upload a different bin.
can you offer any insiht as to what i can to to fix this problem.
i was told that i need a new chip.....i am lookin for a second opinion on this matter.
 

Silver Member
Username: Satscanner

NDS Laboratory

Post Number: 520
Registered: Nov-06
Not shure if this is correct or rummor,maybe someone can verify this:I read there is a protection in the bin that identify's clones and causes verious problems like this,Or maybe a corrupt bin,or wrong bin for your receiver.But dsscomunity has lot's info on correcting flash problem's thats were I got the info to correct my "failed" flash problem's.I'm just learning ultra myself,but read there,thats what I do.Sometimes info overload is too much to fast.lol. Good luck.
 

New member
Username: Vette86pc

Post Number: 2
Registered: Dec-06
Try loading a factory flash and see if that works.
 

Gold Member
Username: Lklives

Post Number: 6572
Registered: Jan-06
If u have acces to another VS Plat working, then just slave them...
 

New member
Username: Baddasstoyz

Toronto, Ontario Canada

Post Number: 1
Registered: Dec-06
does anyone have a site for reprogamming the veiwsat pl lite
 

New member
Username: Poser

Post Number: 3
Registered: Dec-06
all files for all boxes (including viewsat plat) are posted on this site:

http://www.ftaplayground.net/

very good support as well, I'm a member there and they have been really helpful,
highly recommended.
 

Gold Member
Username: Lklives

Post Number: 6610
Registered: Jan-06
www.totalfta.com is the Dss HOME site for ALL Viewsat receivers!...they have all the Viewsat info and files...along with DSS info for other receivers..
 

Silver Member
Username: Minn_rocks

H-Town.....

Post Number: 115
Registered: Aug-06
billy lane go here...

http://www.dssrookie.com/forums/
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us