Hi i have a fortec classic and i was working fine until the last key change.It says "please wait code being updated" can any one tell a solution. i have posted threads like this before but never got an answer
Shahab khan keys didn't change at all bud...U might wanna turn off ur receiver from the back and turn it back on and see if that slove ur problem, New keys should be posted in New keys Thread if u wanna to doulbe check
Bev Keys changed this morning, if thats the key change you are talking about, DN hasn't changed since Dec 08, but as MC Sunny has suggested to turn your receiver off from the back and then turn it back on after a while, that should solve your problem.
Nagra2 Keys Dish Provider 0101: Last Updated (Dec8 10:30pm EST)
i turned my reciver off and even unpluged it for more than 10 min the prob seemed to be same. the message disappears and appears again. i looks like it picked up something is about to display it but shows the same message agin
I am new to Satellite Receivers. Could anybody guide me about the keys and the procedure to progam it? Do I have to mention the make/model of receiver or it's common key/programming method for all?
Turn your autoroll off and enter the keys manually, see if that helps, if not then do a blind scan, and if the problem still exist then download your bin file again
any reputable fta site ftamorvex.com fsfta.com ftatalk.com are a few do a search for more if you want. make syre you get the correct file and loader for your receiver.
i have a new computer and it dosnt come with a female conector at the back any other way. and Fortec classic they is only manaul scan and insltion scan and autor oll dosnt turn off