Pansat 2700a signal bouncing

 

New member
Username: Ricosanka

Post Number: 1
Registered: Nov-06
Can anyone please help. I have a Pansat 2700a with disq 1 119 and disq 3 148.
Now the 119 works great.
The 148 has signal problems.
TP1 for 148 shows signal bouncing from 30-50%.
TP2 for 148 shows signal strength constant at 70%.
When i save tp2 for 148 and exit , the picture comes and goes because the signal strength bounces between 30-70%
I have tried everything. Can anybody please help me. I cant figure this problem out.
 

Silver Member
Username: Nikk

Post Number: 699
Registered: Sep-06
Replace your Diseqc or plug the cable coming from the 148 into a different input and change the configuration...
 

Silver Member
Username: Big_fat_j

POTTSVILLE, STONEYTOWN GREEN-LAND

Post Number: 243
Registered: Aug-06
Its likley your dish needs a slight adjustment or something is blocking the signal like a big tree or a bird craped all over the lnb lense.Adjust the dish using a weak TP.Or clean the lense.

You cant save a TP to anything.
Each sat uses 20 or more TPs.
Each TP carries 10 or more channels on sub frequencys.
The channel you have on is the TP that showes when in antenna setup.
Every time you change channels it changes to that TP and channel sub frequency.
 

Silver Member
Username: 18_volts_baby

Super Moder...

Post Number: 137
Registered: Aug-06
BUMP...........
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us