First if you allready have dishnet Reciever Installed go to Menu-->6-->1-->1 and see what signal you are getting it could be 61.5 WEST , 121 WEST (IF YOU HAVE BIG SUPERDISH) OR 148 WEST
IF YOU HAVE 119 OR 110 WEST ONLY YOU WILL NOT GET ANY INDIAN CHANNELS.
After you find out which one of this signal you have, it will be easy for you to install your pansat or any other reciever you have.
IF YOU HAVE PANSAT MOST OF PANSAT MODELS HAVE SAME SETTINGS
ON YOUR PANSAT 1)GO TO MENU 2)INSTALLATION 3) ANTENNA SETUP 4) HERE YOU WILL HAVE TO SELECT ONE FROM 3 SATELLITE. 1-61.5°W EchoStar 3 2-121.0°W EchoStar 9 3-148.0°W EchoStar 1/2 5) IF YOU HAVE 61.5 OR 148 YOU WILL HAVE SAME SETTING FOR BOTH
6) LNB TYPE - STANDRED LNB FREQ - 11250 22KHZ - OFF DISEQC - DEPENDS OF YOU HAVE SWITCH INSTALLED 1 2 3 OR 4 SKEW - DON'T MESS WITH IT TP - DON'T MESS WITH IT POSITI SET - Disable Satellite Scan - ALL
7) LEVEL IS YOUR NOT YOUR SIGNAL IF YOU DON'T GET LEVEL YOU WON'T GET QUALITY
8) QUALITY IS YOUR SIGNAL FROM DISH- THIS MUST BE OVER 70% MEANS GOOD SIGNAL
9) EXIT AND SAVE
10) FINALLY GO TO SAT SCAN AND SELECT ECHO 3 OR 1.2 AND SCAN THE SAT.
SCANNING WILL TAKE SOME THING SO LET SCAN TILL 100%
FOR 121
JUST LNB FREQ YOU DON'T HAVE TO CHANGE TO ANY THING