I have made some changes that work to BL instructions...read the NOTES at bottom..and re-read these instructions CAREFULLY...
DO NOT use the SD card when loading the new bin 302..continue to use the null modem cable!...start all over ...upload factory bin...then boot8 b80 file, then 302 bin ...with Null modem all the way...the receiver will reboot itself, don't worry...just wait!
BTW...these bins (initially bin 300 will change and be updated in the files area here, which already has occurred to new bin 302 now)...the attached boot file will NOT change and should always be current..unless a new boot file is ever released..
INSTRUCTION FOR Pansat 3500S/SD BOOT FILE! ...from Blacklist..
PLEASE UPGRADE B-80 Boot file before upgrading newer Bin File. Unfortanatly Boot file can not be done by SD card short cut! ALL users need to use Loader. --------------------------------- Needed tools and Software. 1. Loader Version 35.01 2. Null Serial Cable 3. Boot File b-80 (Will be included in a ZIP File) 4. API File
Please DO NOT Download latest BIN Version (x-05bl_061120_b80_300eubx_api.zip) before upgardin to b-80. ------------------------------------------------------------------- Instuctions ------------------------------------------------------------------------ ------------------------------------------------------------------------
1. Connect Null modem serial cable PC-REC. 2. Open loader Version 35.01 then Select file type (Boot File only). 3. Open Browser and select b-80 Boot File which will be including in a ZIP. 4. Turn the receiver power on and wait minimum aprox 7-8 secounds then click Download to avoid possible error. PAY ATTENTION TO THIS!..READ NOTE BELOW 5. Wait till completed, (Will be rebooted it self). 6. Then select file type to (APP File only) then upgrade to Version (x-05bl_061120_b80_300eubx_api.zip) APP file download also can be done by SD Memory. READ NOTE BELOW,,,SD IS NOT RECOMMENDED HERE... 7. Please DO NOT power off or unplug the cable untill its completed.
Please as remind only Pansat 3500S/SD need this following instruction.
NOTE....step 6 states that SD card may be used to upload latest bin, BUT it has created many problems, so its suggested here, NOT TO USE THE SD CARD and continue to use the cable for loading...
NOTE...To be clear in step #7, you do NOT click download in the loader program as soon as you see the display light up, as you would with a regular 'bin' file?? You wait!