I have Pansat 2500a and I have two dual lnbs with esqc switch installed in 1 dish 500. Can Somebody please tell me if I can use a dp plus lnb on a 2nd dish 500 connected to same reciever, and how to connect. Do I have to connect it to the esqc switch or it has to be straight to the reciever. Thanks in advance Guys.
Not sure what you are asking, but I can tell you this much a DishPro Plus LNB is not FTA friendly and will cause more headaches than you can imagine. However, unless you tell me what exactly you are trying to accomplish, I can't help you. Are you trying to switch the LNB's out. If so, then go get a DishPro (Twin or Quad), but the DishPro Plus, is not worth the trouble. And yes, if you install a DishPro (Twin or Quad) you run one line directly into the receiver as it has a built in switch.