Pansat 3500SD - Scrambled or bad channel

paul n Bronze Member Username: Paulb Post Number: 11 Registered: May-06	Posted on Sunday, November 05, 2006 - 18:06 GMT Pansat 3500SD Have X-05BL API: 3.67_EUbX Boot ver 7.0 02 Nov 2006 Following Keys key0: F6 3D F2 E4 CE 6E 22 44 6B 87 79 6F 66 7C 3F 8E (active) Key1: B5 53 D5 4F DB B8 55 EB 53 60 C1 D7 AA B3 A6 81 Sill get on screen INFO -- Scrambled or bad channel Can anyone give me any guidance
Ranjeet Bins Bronze Member Username: Hanz Post Number: 26 Registered: Oct-06	Posted on Sunday, November 05, 2006 - 18:12 GMT Try switching off from the back for a couple of minutes and turning on again. Then try a blind scan.
paul n Bronze Member Username: Paulb Post Number: 12 Registered: May-06	Posted on Sunday, November 05, 2006 - 18:43 GMT I had put on a new LNB - Dish Pro. When I try to tune in a station, and change it, then try to go back, I get scrambled or bad channel, then I chedk my satelitte and the LNB, it had not changed, but I must select another with a good signal then go back, and it MAY let me view the channel, sometimes I need to repeat it 3 times, before I get the channel back.
LK Gold Member Username: Lklives Post Number: 5255 Registered: Jan-06	Posted on Sunday, November 05, 2006 - 18:59 GMT Change out your switch or check all your cable connections..or your NEW LNB is NOT perfectly aligned now,and u have a weaker signal causing that..
kris kros Bronze Member Username: Kriskros Post Number: 72 Registered: May-06	Posted on Sunday, November 05, 2006 - 19:00 GMT I heard dishpro LNB is not good for FTA receivers. Use regular diseq swith and regular LNBs.
LK Gold Member Username: Lklives Post Number: 5257 Registered: Jan-06	Posted on Sunday, November 05, 2006 - 19:44 GMT Dish Pro is great for FTA...no switches needed with the twin, and less cables....

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us