Auto roll with reciever off

 

Bronze Member
Username: Rbhoop

Post Number: 22
Registered: Jun-06
Hi All
Just wondering when you shut off your reciever(but not off on the back)will auto roll still function?
Thanks for any replys.
 

Bronze Member
Username: Trucker

Post Number: 43
Registered: Oct-05
no
 

Bronze Member
Username: Pathfinder191

Post Number: 98
Registered: Mar-06
I had same problem and Nalin helped me resolve it. Here is copy and paste from his post.

Sam: I have noticed the key morphing poblem with two different clones and with 282T BIN as well. The way to get around it as follows:
1. Turn Key off
2. Turn autoroll off for everything
3. Do set default keys.
4. Go into Nagravision 2 and put in BOTH key 00 and Key 01 and SAVE. If you have DN and BEV do it for both.
5. Exit, set Keys on but leave autoroll off.
6. Go back into Nagravision 2, make sure the keys have not changed. Currently DN is morphing 5th number in Key 00. SAVE again. Exit, exit, exit.
7. Switch off at the back and switch on again.
After the sytem has settled down to normal viewing for several hours, you may attempt to set the autoroll on; it is up to you.

Good luck!
 

Bronze Member
Username: Nalbouz

Post Number: 72
Registered: Oct-05
Put 283T in your box, mine detected the 5th pair DB by it self after i installed the 283T. and when i set the default keys and let it roll, the dn pictrue came after 40% waiting for picture message, and 400% for bev.
 

Bronze Member
Username: Nalbouz

Post Number: 73
Registered: Oct-05
key and autoroll were on
 

Bronze Member
Username: Tinfish

Post Number: 81
Registered: Apr-06
Naser..Did your receiver autoroll yesterday (Nov 1st)?
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us