on the classic NA, there is no options on cutting off the auto-roll. The reciever updated fine with no problems though. Still coming up slow on the channels. If you have any problems, just reboot the box from the back of the reciever and the updated keys should come up.
I had rebooted my reciever and the auto-roll went up fine with the DB on the 5th key in the first line of the keycode. I have the 10/20 bin and i am looking at it right now. Try going to the 5th key and change it to the DB on the first line of keys on the updated keys and set it up still with the auto-roll on and it should be up. The 10/20 bin is still good.
I know that the keys are working good for DN on my reciever. If you are using bev, it might be different. Try factory default, then try to let it roll for a couple of minutes. If it do not go, put in the keys manually from the updated keycode list.
on the default for the keycode for bev, someone on totalfta.com tried it and it worked. set default key for the keycode for bev and let it roll. you have to playwith these fortec classic NA since they do no have autoroll cut off feature like the other recievers. thedefault key starts it off fresh.
Thanks Lee, your are really Gentle man. So I am going to try this option (seting the default key, in Nagravision). By the way, among the thing which I tested, I re-flashed my Receiver by using the 1020, but no more results ..
Default key is the key that was current on 10-20 or whenever bin was released..and if U manually enter the new keys, it'll probably change the 5th digit again, since U cannot shut off the autoroll..but listen to others and try it...he said it works for him..cannot understand how BUT..
