Indian Channels not working

 

New member
Username: M108

Post Number: 10
Registered: Jun-06
Some Indian Channels are not working Zee, Zee Cinema and B4U

Other channels are working so I do have the correct keys. What do I need to do to get these up and running.

Thanks
 

Silver Member
Username: Pannu16

Post Number: 275
Registered: May-06
i have same problem, i am workin on it!! its not key issue!!!
 

Silver Member
Username: Abj

Post Number: 332
Registered: Feb-06
If you have viewsat try turn on auto transponder options they might have changed transponder.
If you don't have viewsat try to do factory default and do a blind scan.
 

Silver Member
Username: Mc_sunny

Post Number: 521
Registered: Feb-06
Pannu wutever i told u yesterday..it should work i got about 10 reciever back by doing that..just rescan ur tp #27..if it dosnt' work turn of ur reciever from the back and turn it back on and then try to rescan that tp..

or try this
Do a Factroy reset and then freash blind scan that should bring all the indain channels back
 

Silver Member
Username: Pannu16

Post Number: 276
Registered: May-06
mc sunny there is no tp 27, they are all 5 digits like 12603 and stuff like that so i dont know wat is tp# 27
i have viewsat extreme!!!
 

Silver Member
Username: Pannu16

Post Number: 279
Registered: May-06
wat is no tp 27.!!!
 

Silver Member
Username: Pannu16

Post Number: 280
Registered: May-06
any answers!!!
 

Bronze Member
Username: The_only_one

Post Number: 29
Registered: Jul-06
yea same i have a extreme too... their all 5 digit tp's. What do i do?

i already tried a tp scan
 

Gold Member
Username: Lklives

Post Number: 4824
Registered: Jan-06
the 5 digits are the frequency...under the freq is listed the TP number at www.lyngsat.com for EVERY satellite!

If U are referring to sat 61.5...take a look yourself...remember to remove the * in link..
http://www.lyngsat.com/packages/dish61.html
 

Bronze Member
Username: Ssp

Post Number: 27
Registered: Jul-06
All indian ch.are working with this keys
these keys for c0olsat
10-AD D4 B6 11 BC FE 23 73
11-23 8E D1 1E D9 5A C7 D0

20-7E 87 A1 1F 5D 3E 3E 47
21-57 C6 1A 36 FC 83 3C C7 (active
 

Gold Member
Username: Lklives

Post Number: 4827
Registered: Jan-06
AGAIN!...those are NOT coo*lsat keys!...they are Dishnet keys...and used on ALL RECEIVERS!...posts like yours are misleading and incorrect!
 

New member
Username: Nanni

Post Number: 2
Registered: Jun-06
I just enter keys for
01: 7E 87 A1 1F 5D 3E 3E 47
57 C6 1A 36 FC 83 3C C7

All Indian Channels are working
 

Silver Member
Username: Pannu16

Post Number: 281
Registered: May-06
but lk wen i tried that lyngsat, and tp it gices me, nothin come on that tp after tp scan and i also tried blind scan!!
 

Gold Member
Username: Lklives

Post Number: 4831
Registered: Jan-06
Indian and Pakistani channels on Echo 3 (61.5)..just do factory setting and then do blind scan for ECHO 3... and just watch free tv..


Sun Tv (610)
Shara Samay (584)
Aaj Tak (585)
Ht ( Hedline Today) (586)
Zee Tv (611)
Set Max (612)
Tv Asia (613)
Set ( Sony) (614)
Zee Chinema (617)
B4u Music (618)
B4u (619)
Zee Punjabi (622)
Zeegujarati (623)
Ppv (cricket) (417 & 472)
 

Silver Member
Username: Pannu16

Post Number: 283
Registered: May-06
not gettin 611, 617, 619
rest everythin is there!!
Thanx lk u r helpin me anyways!!!
 

Bronze Member
Username: M108

Post Number: 11
Registered: Jun-06
Did factory setting as suggested by LK
Then did blind scan for Echo 3

Still not getting 611, 617 and 619.
All others are working.
 

Bronze Member
Username: M108

Post Number: 12
Registered: Jun-06
THANKS LK
I just got back 611, 617 and 619.

Pannu you should also get them back - this is what I did :

(a) factory setting
(b) set up the sattelites
(c) rescanned Echo 3

at this point it did not work

Then I re-entered the same keys manually that were already there and did a scan for Echo 3

I got the channels 611, 617 and 619 but this time I had two channels showing up for these - one set was working and the other set gave the message "searching for signal" I just deleted the ones that were not working and now all is fine.

Try it out and should work for you too.

Good Luck

Thank you LK it worked but I must admit I did not understand what you meant by Tp27 in your earlier posts.

Anyway I got mine back and that is what matters.
 

Gold Member
Username: Lklives

Post Number: 4833
Registered: Jan-06
Those 3 channels are all on the same Transponder (TP)27...so just now ONLY scan TP 27 in echo 3..all receivers have an option to do TP scans..
 

Silver Member
Username: Pannu16

Post Number: 284
Registered: May-06
LK i know u r tryin but one question, which is tp 27, i mean wats the frequency , how wud i find tp 27 !! Which one is it, i have extreme!!!
thanx lk
 

Silver Member
Username: Pannu16

Post Number: 286
Registered: May-06
how do i find which one is TP27, i have viewsat extreme!!!
 

Gold Member
Username: Lklives

Post Number: 4834
Registered: Jan-06
Go to edit satellite settings..
 

New member
Username: Asharma

Whitby, On Canada

Post Number: 1
Registered: Oct-06
Can some body help me !
I changed keys but after 5min. it changed back to old one .
 

New member
Username: Asharma

Whitby, On Canada

Post Number: 3
Registered: Oct-06
Please help me !
 

New member
Username: Asharma

Whitby, On Canada

Post Number: 4
Registered: Oct-06
LK please help me !
 

Silver Member
Username: Pannu16

Post Number: 287
Registered: May-06
all u gotta to do is turn autoroll off
 

Bronze Member
Username: Aafl_dragon

Post Number: 17
Registered: Jun-06
pannu is right turn off auto roll and they'll work
 

Silver Member
Username: Pannu16

Post Number: 288
Registered: May-06
GOOD NEWS IS THAT mine indian channels are up and running now!!
ACTUALLY MY DISH WAS SLIGHTLY MOVED BUT WEN I MOVED IT A LIL BIT< it went all well!!
THANX EVERYONE!! THANX LK
 

Gold Member
Username: Lklives

Post Number: 4842
Registered: Jan-06
Persistence pays off...as U just experienced, ANY slight misalignment will result in loss of channels..strange that U only lost 3 channels though..
 

Silver Member
Username: Pannu16

Post Number: 289
Registered: May-06
yeah LK but i dont know how that sligh misalignment happened but its all good at the end, thanx to ur help guys!!!!
 

Silver Member
Username: Asharfi

Post Number: 211
Registered: Aug-06
Indian Channels Not Working?

Do a factory reset of your receiver and then do a "Satellite Scan" for all of your satellites.

Good Luck!

New keys for Dishnetwork and BellExpressVu and new files for Fortec Star Lifetime Ultra receivers are now available at www.download-dssworld.co.nr

Enjoy!
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us