How to make Fortec Star Lifetime Ultra work work again?

 

Silver Member
Username: Asharfi

Post Number: 158
Registered: Aug-06
Hey friends,

If you fried your Fortec Star Lifetime Ultra, then you should really pay attention. Just follow these steps:

1. Switch you receiver from the back
2. Open the loader and type stb name as LTA
3. Browse its boot file and check Boot File right under File Type on the loader.
4. Turn your receiver ON from the back
5. Before - - - - completes, hit download and let it finish
6. Turn your receiver OFF from the back
7. Turn you receiver ON from the back
8. You'll see - - - - over and over, that means it's normal
9. Load the factory bin to your receiver
10. Load the latest bin for Fortec Star Lifetime Ultra and start watching TV again.

Good Luck!!!
 

New member
Username: Helpme06

Post Number: 9
Registered: Oct-06
Hai,

I have fortec life time ultra. I'm trying from so many days. No luck. Can u please tell me the latest bin name and latest keys? and also the echo settings for 1,2,7,8. Do we need to scan before keys enter or after keys entered? Please help me to get the channels.
thx
 

New member
Username: Helpme06

Post Number: 10
Registered: Oct-06
what is boot file? and which loader do I need to do this all you said in your message? please give me reply.
Thx
 

Silver Member
Username: Asharfi

Post Number: 159
Registered: Aug-06
Your receiver need boot file to get it work. It'll not ON without it.
 

Bronze Member
Username: Helpme06

Post Number: 11
Registered: Oct-06
Asharfi,
Can you please give me links to boot file, bin file . Please answer to other questions also like echo settings for1,2,6,8 and do i need to scan after keys or before the keys ? Please guide me clear step by step. I'm new to this and trying hard from so many days.h
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us