Tell us if there is any receiver working?? if it is wat receivers are working, Ariza 700 is not working with those new keys and autorol oof and neither does viewsat!! DISHNETWORK IS DOWN AGAIN!!!!
it was working!! until yesterday wen keys changed. i have taken the bin from al7bar dot tk it cant be wrong because it was working till yesterday but wen keys changed it stopped working!!!
make sure you enter all your keys right,every digit of it,double check it..turn it off from the back of your box than turn it back on to see any picture..
its not working with new keys and autoroll off!! i have old bin which was working with locals and zee cinema, right now all i am getting is DISH NETWORK info channel. i changed keys. please help!!!
Put autoroll back on, switch off at the back for 2 minutes, power her up. Check if autoroll is still on. Let her stand for 15 minutes with the receiver ON. If nothing happens, then I suggest you DELETE all channels (reset), load the factory bin, default, and then reload the latest bin, autoroll on, blind scan channels back.
Leave receiver on for several minutes until it decrypts... make sure the lnb freq are right.
yes depends on what model you have got i think ariza xtreme is the only one right now that doesn't have a bin file everything else should work smoothly
One of my receivers is a Pansat 2500 with the first release bin, not the new and improved. When I went home yesterday, it autorolled and the picture came on within 3 minutes...