Here it is How To Manually Enter Keys

 

Silver Member
Username: Mc_sunny

Post Number: 391
Registered: Feb-06
For All Pansats

--------------------------------------------------------------------------------


Press menu button on your remote:

#1 Go to parental control...

#2 Go down to "second pin" option & enter 0000

#3 Then go to nagravision and select it by pressing ok button on your remote...

#4 In Nagravision window you should be in the box that is Entitled "Provider ID"...scroll to the right (press right arrow button on remote) until it switches to Dishnetwork (00 01)

#5 Now In Nagravision window go down (press down arrow on remote) to the box that contains "00" entitled "Key Number"

#6 While in the box (highlighted "Key Number") that contains "00", scroll to the right until you see nagravision 2 at the top left of your screen

#7 While in Nagravision2 you should still be in "Key Number" box and the number in that same box should be "00"...this is for Key 00

#8 Scroll down (press down arrow on remote) to key data and enter the new supplied key for 00 (within this site is the key change for Nagravision2)..take note on how to enter letters in the lower portion of the screen (ex. letter E=FAV button on remote)

#9 Once key is edited select OK button on your remote (OK-STORE confirmation blinks twice in lower right of screen)

#10 go back to the "00" box and move one click to the right which should take you to "01"..this is to edit the "01" key

#11 Follow Steps 8 & 9 above (this time enter key data for key 01 instead of 00)

#12 Click exit and click ok or yes to save changes then exit all the way out and you should be watching tv

Note...For /Bell keys at step #4, "Provider ID" is 09 - 01

---------------------------------------------

Here's how to change them in your ViewSat:

MENU--INSTALLATION--CODE--NAGRA

LEFT arrow until "Dish" displays in the top line

DOWN arrow x 2

RIGHT arrow x 1 puts you on the 2nd line of numbers with "08" in the first column;
you start punching in the below at the 2nd column ("C3" as of 11-04-05)

"Text" key + "2" = "F2", RIGHT arrow

"9" + "8" = "98", RIGHT arrow

"7" + "4" = "74", RIGHT arrow

"4" + "4" = "44", RIGHT arrow

"1" + "F3" key = "1C", RIGHT arrow

"6" + "5" = "65", RIGHT arrow

"7" + "7" = "77", RIGHT arrow

"F4" key + "8" = "D8", RIGHT arrow ...

finishing the top line
You should have the highlighted box in the first column of the 2nd row on top of "08"


DOWN arrow, RIGHT arrow to the 2nd box in the 3rd row

"1" + "7" = "17, RIGHT arrow

"LAST CHANNEL" key (below "9" key) + "3" = "E3", RIGHT arrow

"LAST CHANNEL" key (below "9" key) + "1" = "E1", RIGHT arrow

"1" + "F4" key = "1D", RIGHT arrow

"8" + "9" = "89", RIGHT arrow

"4" + "LAST CHANNEL" key = "4E", RIGHT arrow

"5" + "3" = "53", RIGHT arrow

"4" + "5" = "45", RIGHT arrow

EXIT, "YES" to save

EXIT to TV screen and watch tv

----------------------
This puts the PRETEND KEYS into the 08 & 09 KEY lines.

If you need to put KEYS into the 88 & 89 KEY lines... do above and substitute 88 for the "08" line and 89 for the "09" line.
--------------------------------------------------------------------------------


How to change the NAGRA2 Key codes
(for Fortec Lifetime Ultra only)

1- Press Menu button on your remote control

2- Press right arrow key 2 times Channel Edit

3- Press down arrow key button 2 times, press OK (Code) enter 1010

4- Press the down arrow key to Set Default Key, click OK

5- Press the up arrow key to Nagravision click OK

6- On your top left you should see Nagravision-1...if not, then you've got the wrong BIN version.

7- Press right arrow key until you see Dish Network on top

8- Press the down arrow key once to Key Number

9- Press right arrow key 2 times the from Key Number 00 - 01 - 00

( Now take notice that on your top left you should see Nagravision-2 now )

10- Then press DOWN button key to change the keys manually on Key Number 00

11- Enter new Keycode, do the same procedure to enter the the keys on Key Number 01

Note:
Satellite Providers changes the stream key codes unpredictably,


(Note: remote control key letters equivalent)
A = Sat, B = i, C = Tv/Radio, D = Pause, E = Audio (speaker), F = EPG

12- Check and make sure that you got all the keys....Press OK to store (save)

13- Press EXIT key 3 times to exit to the channels.

Note:
If you accidentally lock the KEYCODE (OFF) use this default password 1668



How To Manually Enter Keys For Ariza:
---------------------------------------------
Press
1- Green button
2- Red button
3- Red button
4- Menu button
5- Press right arrow several times until you see nagravision
6- Now depend on the key that changed and it is active you must scroll down til proper key to be changed
Example: On 06/09/05 ECM key 01 is active. Scroll down to provider 000101 01 key line and enter xx xx xx xx xx xx xx xx (enter number with your # button in your remote and for letter follow code definition button on your TV screen)
7- Press OK for 5 seconds.
8- Exit,exit...........
9- Enjoy

DN active provider in ariza flash is 0101. so edit keys in 000101 lines
DN key 00 is in 3rd line from top to botton
Key 01 is in 4th line

Suggestion Courtesy Of Yono:
How To Manually Enter Keys For Digiwave:
-------------------------------------------------
1- Press MENU
2- Scroll down to System Setting.
3- Press OK. If you see a red dot in the botton/left of your screen, go to step 5
4- Enter number 1004. A red dot will come out at ur bottom left. YOU DO NOT NEED TO DO THIS STEP w/ lastest bins.
5- Press red button (audio).
6- Press right arrow until NAGRA appears in the first line.
7- Down arrow up to Provider and right arrow up to 0001.
8-Now scroll down to first key line and press OK. scroll to the letters and number and enter Key 00. Get keys from Maestra or another site or using a key grabber program
9-Scroll down to second key line, press ok. and enter key 01
10- Scroll To Save Key and
11- Press OK.
12- Exit and Enjoy




Co0lsat - How to change Keys

--------------------------------------------------------------------------------

Changing Your c*oolsat 4000 keys (Step by Step) Illustration
Before you can accomplish the folowing intructions you will need Keymaster 2.0.
I can only illustrate intructions without the keys. You will have to use the Keymaster 2.0 to obtain the current keys.

MANUAL KEY ENTRY INSTRUCTIONS FOR C*OOLSAT PRO 4000:

Instructions for Dishnet:
Find and select satellite tab: NAGRAVISION (00 01)

Once you locate the above mentioned tabK
You must change the values of that screen to this:

10: XX XX XX XX XX XX XX XX
11: XX XX XX XX XX XX XX XX
00: 00 00 00 00 00 00 00 00
01: 00 00 00 00 00 00 00 00 and save it.

If the above key entry instructions does not work for you on dishenet (NAGRAVISION (00 01)?
Change it to the instructions indicated above to the one illustrated below:

(Remember: This XX characters whould be replaced by the actual keys from keymaster) The zeros are actual key entry values needed, to make it work.

20: XX XX XX XX XX XX XX XX
21: XX XX XX XX XX XX XX XX
00: 00 00 00 00 00 00 00 00
01: 00 00 00 00 00 00 00 00 and save it.
(Notice: That the #10 and #11 above are now #20 and #21 on this sample)
On some receivers, this is the only way it works!
For BeLL
Select satellite tab: NAGRAVISION (08 01)

BELLV= Provider 0801
Nimiq N2 Keys

Must change whatever contents on this screen to CURRENT keys:
Remember: Because I cannot actually provide you with the keys, I can only illustrate what to do.
You must adquire the real values using Keymaster 2.0

Remember... No keys are allowed to be diplayed by the rules here, so I can only illustrate intructions without the keys. You will have to use the Keymaster 2.0 to obtain the current keys.

Key : xx xx xx xx xx xx xx xx
Key : xx xx xx xx xx xx xx xx


A walk trough illustration of what to do: (To enter keys manuallyfº

1) Turn On Receiver
2) On the remote control press 8282

When the key window appears:

On the top of your screen, you will see many tabs with options like Saca, Nagravision, etc. Scroll left or right until you find the one that has the following information on it:

NAGRAVISION
(00 01)
When you find the tab that matches the items mentioned aboveK

On the bottom of that NAGRAVISION (00 01) tab or choice, you will see a window with four lines, which contain letters and numbers'K Scroll down using your remote to the first line with the letters and numbers and make the following changes indicated below:

Note:

The following illustration below is only used for as a guide to illustrate to you what to do. It does not necessarily mean that you will find the same letters or numbers displayed below: (they more likely to be much different) But. I use it to guide you in the process to show you what to do:

It would look something like this below:

(Remember: This XX characters whould actually be different in your receiver.
You can find the actual keys from keymaster) The zeros are actual key entry values needed, to make it work.

11 XX XX XX XX XX XX XX XX
10 XX XX XX XX XX XX XX XX
00 XX XX XX XX XX XX XX XX
01 XX XX XX XX XX XX XX XX

Change all of that to this:
(Remember: This XX characters whould be replaced by the actual keys from keymaster) The zeros are actual key entry values needed, to make it work.

10: XX XX XX XX XX XX XX XX
11: XX XX XX XX XX XX XX XX
00: 00 00 00 00 00 00 00 00
01: 00 00 00 00 00 00 00 00 and save it.

If the above key entry instructions does not work for you on dishenet (NAGRAVISION (00 01)?
Change it to the instructions indicated above to the one illustrated below:

(Remember: This XX characters whould be replaced by the actual keys from keymaster) The zeros are actual key entry values needed, to make it work.

20: XX XX XX XX XX XX XX XX
21: XX XX XX XX XX XX XX XX
00: 00 00 00 00 00 00 00 00
01: 00 00 00 00 00 00 00 00 and save it.
 

Silver Member
Username: Mc_sunny

Post Number: 393
Registered: Feb-06
VERY IMPORTANT

C*oolsat Slot 10 and 11 are for Idea Key 0 and Slot 20 and 21 are for Idea Key 1

Pansat key 00 for Idea Key 0 and Key 01 for Idea key 1

Viewsat line 08 and 09 for Idea Key 0 and lines 88 and 89 for Idea key 1

For Receivers with only two Key Slots, Enter Active Idea Key into 00 and 01
 

Bronze Member
Username: Salam

Post Number: 30
Registered: Apr-06
MC

I tried new keys but still getting "Scramble or bad channel", I have a Pansat 2700a. I enter the keys in N2

Dish Network:
KEY86: 24 D2 1E 6D 11 F0 95 1A 6F 74 6E BD BC C6 92 54
KEY96: 66 B9 F6 53 70 ED 2A 5B 31 D5 59 D2 9F 1C 52 63 (Active)
I have also went to parental control and turned off - keycode - Dishnet Autoroll - Bev Autoroll - Globcast Autoroll

Do you have any idea what I am doing wrong?

Thanks in advance
 

Bronze Member
Username: Salam

Post Number: 31
Registered: Apr-06
Nevr mind, I went back and turned all autorolls "on".

TV is back on
 

Silver Member
Username: Mc_sunny

Post Number: 397
Registered: Feb-06
gr8..u got it working ..enjoy ur tv now
 

New member
Username: Ariza123

Post Number: 6
Registered: Oct-06
ok now how to do this on Ariza 700?
 

Silver Member
Username: Mc_sunny

Post Number: 399
Registered: Feb-06
How To Change N2 Keys Ariza 700

1) Press Menu

2) Scroll Down to Parental Control, Press Enter

3) Press "i" key on remote, then enter pin number "2004"

4) Scroll down to Set Default Key, Press Enter

5) Scroll up to Nagravision, Press Enter

6) Press VOL Right twice, you will see Dish Network

7) Press CH Down once, then VOL Right Twice, you will now see Nagravision 2 displayed top left

You are now at the key 00, Press CH Down once so you can edit the Key Data

9) Enter your new keys (write down the old ones to be safe)

10) Press Ok to store, then repeat with key 01

11) Press exit until you get back to tv, all channels will be available
 

New member
Username: Mickey32

Post Number: 9
Registered: Jun-06
what about Rex-1?
 

New member
Username: Mickey32

Post Number: 10
Registered: Jun-06
I not have news from Rex!
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us