No Food Network channel?

 

Bronze Member
Username: Piccalo

Post Number: 64
Registered: Jun-06
I am not sure whether its just for me, but I am not getting the "Food Network" channel with the new bin.

Anyone else on the same boat?
 

Bronze Member
Username: Bones714

Post Number: 39
Registered: Mar-05
I'm getting it, what birds are you using(110,119)?
 

Bronze Member
Username: Piccalo

Post Number: 65
Registered: Jun-06
Thanks for the reply, btw how do you see what bird i am using? I have a pansat 2500 clone.
 

Bronze Member
Username: Piccalo

Post Number: 66
Registered: Jun-06
hey bro found it....i am uisng E7@119, so that would be the 119 bird.
 

Bronze Member
Username: Bones714

Post Number: 40
Registered: Mar-05
You can go to blind scan and see what satellite your using. Echo7 is 119, thats a 10-4!
 

Bronze Member
Username: Ducnhung

Post Number: 24
Registered: Sep-05
What is the LNB Configuration number for 110 and 119. Right now the LNB #11250, showing same for both 119 and 110 and I think should be different? I try to blscan 110 and I got all 119 channels. Pls Helps.
 

Bronze Member
Username: Piccalo

Post Number: 67
Registered: Jun-06
Hey DL, I also have the same LNB# for both the E7 and E3
 

Bronze Member
Username: Ducnhung

Post Number: 26
Registered: Sep-05
but when i blind scan E3 all i got all E7 channels why?
 

Bronze Member
Username: Bones714

Post Number: 42
Registered: Mar-05
Both of my LNB# are the same, 11250. Check your Diseqc setup, I have my 119 hooked up to port 1 and 110 hooked up to port 2.
 

Bronze Member
Username: Piccalo

Post Number: 68
Registered: Jun-06
Hi TuaNguyen, I am on E7@119, is that the reason why I am not receiving the Food Network?
 

Bronze Member
Username: Bones714

Post Number: 43
Registered: Mar-05
U said u were getting it a few posts earlier.I'm getting food net on 119, try a blind scan.
 

Bronze Member
Username: Ducnhung

Post Number: 27
Registered: Sep-05
TuaNguyen echo 8.10/KU is 110?
 

Silver Member
Username: Jrq

Post Number: 125
Registered: Jul-06
DL if you are getting the same channels from both satellites, you need to do 2 things.
1 - your diseqc switch setting could be wrong. Use switch 1 for the 1st bird (e.g. 110) and switch #2 for the seoond bird (e.g 119)

2 - the lnb cable going into switch #1 (bird 110) better be pointing to 110 satellite; and the lnb cable going into switch #2 (bird 119) better be pointing to 119 satellite.

It's tough to point when you have both LNBs hooked. Try disconnecting 119 from switch #2 and try to get 110 only - then change over and try 119 alone. Once you have both and your swiches are set right, you will blindscan both birds.

If you have a premanent problem with one bird go back and check all connections.
 

Bronze Member
Username: Ducnhung

Post Number: 28
Registered: Sep-05
TuaNguyen does channel DIY is on 110?
 

Bronze Member
Username: Ducnhung

Post Number: 30
Registered: Sep-05
Thanks JRQ
 

Bronze Member
Username: Ducnhung

Post Number: 33
Registered: Sep-05
JRQ E8.10 =110 and E7 =119?
 

Silver Member
Username: Jrq

Post Number: 127
Registered: Jul-06
Yes DL... echo 6/8 is 110 degrees west, and echo 7 is 119 degrees west.
 

Bronze Member
Username: Ducnhung

Post Number: 35
Registered: Sep-05
Thanks again JRQ!!!
 

New member
Username: 23abc123

Post Number: 1
Registered: Sep-06
Hi JRQ: I am using Super Dish 121 and on my 121 I am not getting all the channels when I did bld scan on my FLU, after applying 279 fix last night. I tried connecting 121 using a long single wire directly to my flu without any switch it did not help. Signal strenght and quality is above 90. what could be the problem. Before that I was in another State and was using dish 500 + a small dish. Now that I am using super dish 121 and I am not getting ARYDIGITAL, GEO and some other channels. Some of the Indian channels are there like ZEE, SET, ASIATV but no SETMAX. Could you please help????
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us