I just uploaded the 277t bin and then set default keys and then installed new keys, but I am not getting any channels. I noticed that the signal level for 110, 119 and 121 is fluctuating between 26% and 88%, but the Quality remains 0. Any ideas what could be wrong? I know the dish is pointing correctly because my Dish Network receiver is working.
Gopher, repeat these steps one more time and check current keys, too. If it doesn't work, slap dish gently or reset/restart receiver on the back. Be sure satelite installation setting is right.
Hi Eva, i have a pansat 2700, the bin is the last one BL released. what do i need to do to get up and running. was there a fix released or do i just enter new keys. Is it possible for D N to send an E C M that can fry the recievers? Thanks for any info regarding this new development
don there is no fix release,all the channels just came back,no idea why..... 1.need to enter lastest keys. 2.delete all the channels on your sat. 3.do a blind scan,that it........
first of all need to have new keys enter in,do a blind scan,still don't work turn off your box from the back then turn it back on,if your signal still 0,i have no idea..
If your signal is cero check with selectin anothers tp, i mean all the issue is cable or swithc, try if you disconect your dish cable, and try only with your pansat.
don,i don't think an ecm can fry your recievers,it will blackout all of your channels,but fry your recievers haven't heard that before,if u load a bad bin it might fry your box... are your PS up and running yesss?
Eva or Minn Rock do you guys know if I need the diseqc switch to get quality picture? when I bougthg my pansat the one comes with the receiver never work instead I used the one from dish and work but since the delay of a fix I call dish to put basic programming and they install a card less receiver and they remove the multi switch I was not at home when that happens now I can`t get quality is because of the multi switch? or is another issue.Thanks for your help in advance