Hey jaime

 

Bronze Member
Username: Crazy_greek

Post Number: 53
Registered: Jul-06
Yesterday I had no luck or skill.
I will try again today.
I followed your instructions I only received 51 signal level.
From my location I set the Stabs HH Motor to my Latitude 38.9.oN the closest Bird to me in the clear is AMC 5 79.oW the Dish Elevation is 44.8.
What value do you change? I changed the Dish to 24. Also I set the motor and the Dish on a offset mast does this made any difference?
THANKS
 

Silver Member
Username: Morispastora

Thunder bay, Ontario Canada

Post Number: 214
Registered: Aug-06
Kavin:
the elevation of 44.8 is okey I don't know how you did it but that's right,the 24 changes to 21.5 they never correct that..Check that the motor pipe should be in the center position,indication by 0 degrees on the motor mount scale y do minor adjustment the ways I told you before
 

Silver Member
Username: Oleg1474

New port richey, Fl Usa

Post Number: 131
Registered: Aug-06
Thankyou for your advice...
my PANSATs still working fine
www.ftapalace.com
 

Silver Member
Username: Morispastora

Thunder bay, Ontario Canada

Post Number: 250
Registered: Aug-06
Kavin reno:
For galaxy10R, set the TP 11720.V
Universal LNB doesn't show the quality signal
When you get the level to 80 or a little more do a blind scan,,after you get some channales do a fine tune. AMC 5 set the tp 11742 if you get KUEN-TV .That mean you got AMC5
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us