Pansat 2700a Help
|
New member Username: SecretsniperPost Number: 4 Registered: Jan-06 | After I uploaded the last bin..I was trying to go to parental control and I accidently okayed the Factory Setting and all my channels and settings are deleted. Can someone help me with this. Thanks a lot. |
|
Bronze Member Username: BhundPost Number: 80 Registered: Mar-06 | Download The latest bin again.Go to parental and change keys.You will only get locals right now because dn is down.The new bin will be out early as today up to two weeks |
|
Silver Member Username: Donnie1973Post Number: 260 Registered: May-06 | Start over i guess. blind scan. unless u have ur channel list on channel master or something i guess. |
|
New member Username: SecretsniperPost Number: 5 Registered: Jan-06 | oh ok..what are the latest keys for DN? |
|
Bronze Member Username: KeanosPost Number: 42 Registered: Dec-05 | bin for pansat 2700 |
|
Silver Member Username: Bazuka2020Post Number: 445 Registered: Oct-05 | The one posted at al7bar does any one tested it its not from bL so be careful, I request anyone who knows jtag should try and update please |
|
Gold Member Username: LklivesPost Number: 4091 Registered: Jan-06 | AGAIN...these are BOGUS old Pansat bins...should not harm your Pansat receivers...if the ones at al7bar are the same from Dsstester..all released today, from probably the same jerk.. |
|
Silver Member Username: Bazuka2020Post Number: 446 Registered: Oct-05 | True its a joke dont waist time |
|
Bronze Member Username: KeanosPost Number: 43 Registered: Dec-05 | Thanks a lot. |
|
Silver Member Username: Bazuka2020Post Number: 447 Registered: Oct-05 | The forum at al7bar confirmed that its a fake bin and some folks have to jtag their receivers. fun is over |
|
Silver Member Username: Bazuka2020Post Number: 448 Registered: Oct-05 | CP al7bar bgsxy Title: Registered User Rank: Cable Watcher Status: bgsxy is online now Profile Join Date: May 2004 Posts: 30 Unhappy It's a fake! The file does nothing but freeze your receiver and get your hopes up... I already tested it! Dirty b@stards... |
|
Gold Member Username: EvadelparaisoPuerto Rico Post Number: 1916 Registered: May-06 | ECHOSTAR KEYS N2 Updated: Tuesday, August 22 2006 at 9:16 AM -------------------------------------------------------------------------------- Dish Network: N 0101 00: 84 4E 77 C8 56 91 5F BC 08 DE 10 D6 D2 91 7E F7 N 0101 01: (Active) 98 F5 81 B3 1E 96 00 3C 67 59 AE 1E D5 2E 1F D2 JOhn Do you need scan channels before go to parental control second pin and under nagravision 2 enter the keys. For set your receiver set the date etc, select satellite, check the disqC lnb etc configuration. Check the signal and scan channels, later go to parental control second pin... Lucky |
|
Bronze Member Username: Yo8bpsPost Number: 80 Registered: Jun-06 | EVA : Alwyas right and on the money !!  |
|
Bronze Member Username: Minn_rockPost Number: 85 Registered: Aug-06 | Cris,u can say that again,Eva is an ANGEL....... |
|
New member Username: SecretsniperPost Number: 6 Registered: Jan-06 | Ok..here is what I get confused with After I okayed Factory Setting, I did not have any of the options enabled except Installation, User Setup, System Informaton, and Factory Setting. And after I click Installation, I have Anntena Setup, Blind Scan, and Edit TP/Satellite enabled. I only get Echo 3/Ku at angle 61.5. So, what should I do from start. |
|
New member Username: SecretsniperPost Number: 7 Registered: Jan-06 | When I do Blind Scan on Echo 3/Ku, it says "0 Transponders Found" |
|
Bronze Member Username: Albino_midgetPost Number: 77 Registered: Jul-06 | you should go to antenna setup and configure accordingly when you get a signal then scan |
|
New member Username: DrphilPost Number: 10 Registered: Jul-06 | Probably this is not important, but I want you to notice that the current keys were last updated in August 18th, not the 22nd. I wonder why they stoped changing keys so frequently. |
|
New member Username: SecretsniperPost Number: 8 Registered: Jan-06 | "you should go to antenna setup and configure accordingly when you get a signal then scan" Can someone tell me their configuration for Echo 3/Ku? I get 73% Level and 0% Quality. Any help will be greatly appreciated. |
|
New member Username: SecretsniperPost Number: 9 Registered: Jan-06 | anyone? |
|
New member Username: SecretsniperPost Number: 10 Registered: Jan-06 | anyone? |
|
Bronze Member Username: Herb_tokerPOTTSVILLE, GRASSLANDS GREEN--LAND Post Number: 100 Registered: Aug-06 | LNB TYPE- STANDARD LNB LOCAL FREQ- 11250 22KHZ- OFF DISEqC- Port #? on your switch. SKEW- -45 TP- xxxxx POSITIONER- Disabled SAT SCAN- ALL |
|
Bronze Member Username: SecretsniperPost Number: 11 Registered: Jan-06 | After doing all the scans I still did not get any results... the quality is still 0% and to increase the quality I need to enter the keys. But to enter the keys I have to go through parental control which is disabled! I really dont want to give the repair dude $20 bucks for nothing so plz help out! |
|
Bronze Member Username: Sls1970U S A Post Number: 13 Registered: Jul-06 | have you tried doing a blind scan? I have to do blind scans on my 2700 or it will not pick up anything. also make sure your lnb freq. is set to 11250 or it will not pick up tp's properly. |
|
Bronze Member Username: SecretsniperPost Number: 12 Registered: Jan-06 | Yes, I have done Blind Scans and only message I get is "0 Transponders Found" |
|
Silver Member Username: Herb_tokerPOTTSVILLE, GRASSLANDS GREEN--LAND Post Number: 130 Registered: Aug-06 | If you dont have signal you cant scan anything. You have to scan something before you can get to parrental controls. Answer this: Are you using a switch?and more than one dish? What kind of dish? Why echo 3 ku? |
|
New member Username: ItsoRenton, WA USA Post Number: 3 Registered: Aug-06 | Hello everyone .I need Bin and key for pansat 2700A and instructions how put the BIN and key.Please i need from HELP. HELP.HELP. Could you please explain the ACTIVE key. I don't get it. Is this the "Provider ID" or "Key Number" in the Nagravision-1 window? How do I enter the ACTIVE key from the remote control? Thank you very much. |
|
New member Username: GrosspolluterSO.Cal Post Number: 2 Registered: Aug-06 | You know your only going to get a few local channels right. Do you know how to flash files to your reciever? If so, download bin @ dsstester,com and use the latest bin for pansat 2700. I'm kinda a noob(newb), but I'll help as much as I can. |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics