New member Username: Nativtxn53Post Number: 1 Registered: Aug-06 | About a week ago my picture began to flash to black and white in random places continually getting worse till it would automatically shut off. I've replced the lamp but the problem persists. Any ideas? |
Silver Member Username: FyiDallas, Texas Post Number: 805 Registered: May-05 | DMD Control Module is flaking. Could be getting hot if the fan has been compromised by dust. Take the back off. Clean everything with a brushy on the vac hose. Tape the cover switch shut and power up. Check for proper fan operation. Both should spin equal and quiet. May be too late for DMD Control board, though. |
New member Username: Nativtxn53Keller, TX Post Number: 2 Registered: Aug-06 | How much is a DMD Control Board? |
New member Username: Nativtxn53Keller, TX Post Number: 4 Registered: Aug-06 | I did the vac and both are spinning quiet and equal. Would it be worthwhile (or wise) to just leave the cover off? |
Silver Member Username: FyiDallas, Texas Post Number: 806 Registered: May-05 | I wouldn't leave it off. Not sure about cost. www.samsungparts.com or 1-800-SAMSUNG |
New member Username: Nativtxn53Keller, TX Post Number: 5 Registered: Aug-06 | Seems to be working so far. I've only had it on for about 1.5 hrs but no prob. The picture is good so I guess I don't have any DMD flaking. Thanks for the advice. |
Silver Member Username: FyiDallas, Texas Post Number: 807 Registered: May-05 | Kewl! |