i have 2 dish outside and i have switch but i cant recive any signal in my reciver in the same time when i put my big dish 33' alone i can have a signal
I dont know what that is you need diseq switch, go to installation and select appropriate lnb for the dish and you will get the signal. In installation you have to assign lnb for each dish
There are two cables coming from the dishes one from each, the switch has numbers for example dish towaqrds 110 sat cable going to No. 1 On the receiver you assign 1 to that sat and so on
click "MENU"; click "INSTALLATION"; click on "ANTENNA SETUP"; click on desired sat; scroll down to "DISEqC"....and enter either 1,2,3, or 4...whichever # that corresponds to that particular bird in your switch. Hope that helps